Among them the control system of hardware has introduced the peripheral circuit including main chip mainly, the module the signal gathers and the motor driving module.
其中硬件控制系统主要介绍了包括主芯片的外围电路，信号采集模块以及电机驱动模块。
Main circuit configuration and integrated voltage-reactive power control scheme for balancing compensation with cascade inverters based STATCOM is proposed.
给出了采用链式STATCOM实现平衡化补偿的主电路结构及电压-无功综合控制方法。
The conditions of voltage between contactors and current in main circuit under different using types are analyzed in detail, then designed the control sequences with working mode AC1-AC4.
详细分析了交流接触器在不同使用条件下的闭合与分断时触点两端电压与回路电流情况，并研究了AC1～AC4工作制下的控制时序。
The SPMC75F2413A chip is used as main control chip to control single-phase bridge inverter main circuit.
系统以SPMC75 F 2413 A作为主控芯片来控制单相桥式逆变主电路。
This article summarizes the hardware organization and working principles of the thyristor zeropassage trigger capacity control circuit which have a singlechip as its main body.
本文简述了采用单片机为主体构成的晶闸管过零触发调功装置的硬件构成和工作原理。
How to choice parameters of PFC main circuit using DSP as control center is described, what is more, two methods to select parameters of PID adjuster are also discussed.
文中讨论了采用数字信号处理器(dsp)作为控制核心时PF C主电路参数的选择，并详细讨论了两种数字PID调节器参数的确定方法。
After the summarization of present literatures, analyses and comparisons are made on the ASVG's main circuit, present detection system and control methods.
根据现有文献对静止无功发生器的主电路结构、各种有害电流检测方式和控制方式进行了分析、比较和总结。
Two kinds of main circuit configuration and integrative voltage reactive power control scheme for balancing compensation with single phase STATCOM are proposed.
提出了采用单相statcom实现平衡化补偿的两种主电路结构及电压无功综合控制方法。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
Voltage-doubler output of main topology and control circuit based on DSP are given in the paper.
文中给出倍压输出的功率主电路和数字信号处理器（DSP）控制电路。
The structure of main circuit and the control circuits and the relative calculations are also given.
同时给出了主电路、控制电路、主要参数的计算方法及相关波形。
The main circuit, control circuit and driving circuit of the developed device was studied and designed in the paper.
文中对所研制的焊接磁搅拌装置的主电路、控制电路、驱动电路进行了研究和设计。
The hardware design includes the SCR voltage regulating main circuit and the control circuit whose core is the PIC16C74 micro-controller.
系统的硬件设计包括晶闸管调压主电路设计和以PIC16C74单片机为核心的控制电路的设计。
When the arm runs to the upper and lower two limit position, respectively press the lower limit switch, cut off the main control circuit, variable amplitude motor parking, to limit the role.
当臂杆运行到上下两个极限位置时，分别压下限位开关，切断主控电路，变幅电机停车，达到限位的作用。
The main circuit and control circuit construction are introduced, the filtering principle and control strategy are discussed.
介绍了综合电力滤波系统的主电路和控制电路，分析了滤波原理及控制方法。
The principle and adjustment result re of the main circuit, control circuit and program control circuit of our KLG-50 plasma arc cutting machine are introduced in this paper.
本文介绍了KLG - 50型空气等离子弧切割机的主回路，控制电路和程序控制电路的工作原理及调试结果。
The intelligent anticorrosive power is made up of main circuit are control circuit.
智能型电源系统分为主电路和控制电路两大部分。
Main circuit uses independent RC pulse generator and control circuit can control the main circuit based on 8051 single chip microcomputer and TC4427 high-speed power MOSFET driver.
其主电路采用了独立式RC脉冲放电回路，控制电路则通过8051单片机和TC4427高速MOSFET驱动器完成对主电路的控制。
This article analyzes the main circuit and control circuit of the welder, also points out the troubleshooting and solutions.
对焊机主电路和控制电路进行了解析，给出了常见故障的处置和维修方法。
The structure and theory of main circuit, control circuit and protection circuit of modularized charge power supply composed by IGBT high frequency switch tubes are introduced in this paper.
介绍了利用高频开关管IGBT构成模块化充电电源的主电路、控制电路及保护电路的结构、原理。
Research of HAPF generally focuses on topology of main circuit and control module design.
混合有源滤波器主要集中在主电路拓扑形式和控制模块的研究。
Have carried on the detailed parameter design to the phase-shifted Full-Bridge soft switching power supply main circuit and the control circuit.
对移相全桥软开关电源主电路和控制电路进行了详细的参数设计。
Based on DSP chip TMS320F2812, designed the circuit of the simulator, and contained the control circuit, the main circuit and the Operation circuit.
围绕DSP芯片TMS320F 2812，设计了模拟励磁系统硬件电路，包括主电路、操纵电路和控制电路。
This paper presents the system design, control tactic and main circuit of control system for hot-dip galvanizing simulator.
主要介绍了热浸镀模拟试验机的系统设计、控制策略和重要回路。
The hardware of permanent magnet AC servo system is designed, including system power main circuit, system control circuit and auxiliary circuit.
设计了永磁交流伺服系统硬件电路，包括系统功率主电路、系统控制电路和辅助电路。
The design process of the main circuit, the control circuit and the time-delay circuit are elaborated after an experimental research of interleaving PFC converters.
最后进行了交错并联功率因数校正电路的实验研究，详细讲述主电路、控制电路及延迟电路的设计过程。
The design process of the main circuit, the control circuit and the time-delay circuit are elaborated after an experimental research of interleaving PFC converters.
最后进行了交错并联功率因数校正电路的实验研究，详细讲述主电路、控制电路及延迟电路的设计过程。
应用推荐