The vice-controller works automatically when the main-controller is out of order.
当主控制器工作异常时，能自动地切换到副控制器工作；
Furthermore, I didn't like the way Cairngorm had only one main controller and everything was accessed through singletons, allowing only one model and one controller.
此外，我对Cairngorm只有一个主控制器并且所有东西都需要通过单例来访问的方式不太满意，因为这样只允许存在唯一一个模型及控制器。
The controller signals the main application to retrieve its results.
控制者就向主应用程序发出检索这个结果的信号。
This system is composed of GPS orientation system and CONFIDENT orientation system and main controller system.
本系统由CONFIDENT定位系统、GPS定位系统和主控制器系统组成。
Db2 System Controller (db2sysc) : Main db2 process.
db 2SystemController (db2sysc)： db 2主进程。
This thesis introduces the design of USB2.0 IP CORE for USB device controller, and mainly about the design of the main controller of the IP CORE.
本文介绍一种USB2.0设备控制芯片IP核的设计，并且主要对其中的主控制器的设计进行介绍。
Control of the hardware design part of the main controller, sensors and motor control circuits.
控制部分的硬件设计主要有控制器，传感器和电机控制电路。
In the electronic product design, display module is often controlled by main controller of the product.
在电子产品设计中，显示模块往往是作为主控制器的一部分来控制的。
The system is composed of sensor, the circuit of voltage matching, main controller and dealing software.
该系统由前端传感器、电压匹配电路、主控制器和事故后处理软件组成。
The control box consists of main controller, video server, and operation box.
控制箱包括主控制器、视频服务器以及操纵箱三部分。
Operation box is the main approach for users to control the robot, signal formed by which will be processed by the main controller.
操纵箱是用户操作机器人的主要途径，产生的控制信号由主控制器进行处理。
This design realizes the data communication between the main controller and accessary controller in MIC bus redundancy system.
本设计实现了在MIC总线冗余系统中主控制器与从控制器间的数据通讯。
The waveform generator is composed by DSP and quadrature digital upconverter (QDU). DSP is used as main controller to decide the modulation mode and output waveform of QDU.
波形产生器主要由dsp和数字上变频器构成，DS P作为主控制器设定数字上变频器的调制方式和输出波形。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The communication of CAN bus replaces the string communication, making the main controller of the elevator control system better realtime response ability.
同时采用CAN总线通讯取代通常的串口通讯，使主控器能更好的实现实时响应功能。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
The basic operational principle of the force-position type sensing system is introduced and the composition of the system with 8031 single chip computer as the main controller is described.
介绍力-位置型力感觉系统的基本工作原理，阐述以8031单片机为主控制器的系统构成。
The hardware is based on S3C4510B as the main controller, which has powerful Internet function and many interfaces to remote control local equipment.
硬件部分以针对嵌入式应用的S3C4510B微处理器作为主控制器，利用S3C4510B强大的网络功能和众多外设接口实现对现场设备的远程控制。
A numerical PID control system which USES 8098 single chip microcomputer as its main controller is introduced in this paper.
本文介绍一种以8098单片机为主控制器的数字PID控制系统。
The main controller is an 8 bits Single Chip Microcomputer:AT89S52 produced by ATMEL company.
由于控制器的控制算法比较简单，主控制器采用ATMEL公司的8位单片机AT89S52。
As for software design, this paper designs the program of main controller and that of touch sense key controller from the perspective of modular design.
设计了搜救器的软件，按照模块化编程思想设计了主控制器程序和触摸按键控制器程序。
The core of automobile black box system is its main controller.
汽车黑匣子控制器系统的核心部分是主控制器。
This paper USES S7-200 PLC as main controller to design a dehumidifier control system, which is equipped with HMI TD400C and communication module EM277.
采用西门子s7- 200PLC为主控制器，配以人机界面TD 400c和通信模块EM277，设计了某除湿机控制系统。
Based on the requests of main controller and the features of PLC, the PLC is selected to be the hardware to realize the main controller.
基于风力发电机组的主控制器的要求及PLC的性能，选择了PLC作为实现主控制器的硬件。
GTO dc chopper is adopted for the main power supply while the switch mode control with derivative feedback loop is adopted for the main controller.
主电源采用GTO直流斩波器。主控采用带微分反馈环节的开关斩控模式。
This article introduces an available control system for the huge hydraulic press machine tool by means of a personal computer (PC) as the main controller.
本文介绍了一个采用个人电脑（PC）作为工业控制系统的主控机来控制大型锻压机床的成功例子。
The microcontrollers transmit data to the main controller by the CAN bus, the main controller can start-up and finish the brake action initiatively after estimating.
单片机通过CAN总线向主控制器发送检测数据，主控制器经过判断可主动启动并完成车体的制动动作。
A switched reluctance motor (SRM) drive system used in electric vehicles was designed, which utilized TMS320LF2407 as main controller.
设计了以TMS320 LF 2407为主控制器，电动汽车用开关磁阻电动机数字化驱动系统。
Using Programmable logic controller S7-200 as main controller, cooperated with hydraulic pressure station, the belt conveyor breaker is controlled.
利用可编程序控制器s 7- 200作为主控制器，配合液压站实现了对带式输送机制动器的控制。
A new superheated steam temperature control system design scheme is proposed, the main controller design is based on Adaptive Network-based Fuzzy Inference system (ANFIS).
提出一种新型的过热汽温控制方案，主控制器基于自适应神经网络模糊推理系统(ANFIS)进行设计。
应用推荐