Finally, the actuation characteristic of large-deflection compliant mechanisms is analyzed as a primary study.
最后对大变形柔顺机构的驱动特性进行了初步分析。
The results showed that shooting method was effective to deal with the deformation of elastic-plastic beam with large-deflection.
结果表明，打靶法是解决弹塑性梁大挠度变形问题的有效方法。
In this thesis a new numerical method - the finite volume method is developed to achieve the static and dynamic large-deflection response analysis for suspension cables.
本文建立了一种新的数值方法——有限体积法进行悬索的大挠度(几何非线性)静力分析和动力响应分析。
On the basis of elasticity of the large-deflection thin penal, the method of weighted residuals is applied in calculating the stress and deflection of the curtain-wall glass.
根据弹性薄板大挠度理论，运用加权残值法分析计算幕墙玻璃的挠度和应力，并与幕墙玻璃规范设计进行比较，结果表明，基于非线性理论的设计计算是可行的。
Based on the piezoresistive effect, large or small deflection theory, thin film's stress theory and other mechanics or electricity knowledge, a piezoresistive micro pressure sensor is designed.
利用压阻效应、大(小)挠度理论、膜的应力形变等力学、电学知识设计了一种压阻式微压力传感器。
Orthotropic shallow cylindrical shells with large deflection are theoretically calculated and experimentally analyzed under the cations of uniform and concentrated loads.
对正交异性扁薄圆柱壳在均布载荷及集中载荷作用下的大挠度问题进行了理论计算和测量。
This paper deals with the inner force and deformation of curtain wall glass caused by vertical and side forces by using nonlinear theory of large deflection.
探讨了幕墙玻璃在纵力和侧力的共同作用下的内力和变形根据实际的变形状态运用大挠度的非线性理论。
A simplified analytical method for the elastoplastic dynamic large deflection response of portal frames under impact loading is reported in this paper.
本文报道一种求解门式刚架在冲击载荷作用下动态弹塑性大变形响应的简便分析方法。
In this paper, a novel system is developed for the measurement of deflection of large structures.
本文介绍了一种用于大型土木工程结构的投影式光学挠度测量系统。
A model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.
建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。
The solutions of a large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure and under concentrated load are obtained in this paper.
本文给出了正交各向异性变厚度圆薄板在均布载荷与集中载荷作用下大挠度问题的解。
The results show that the deflector has the features of a large, bidirectional angular deflection and fast time response.
测量结果表明，这种微偏转器的特点是可双向偏转且偏转角度大且具有快的时间响应。
Comoving coordinate system and incremental process are adopted and the effect of large deflection on loads is also discussed.
采用拖带座标系和逐步增量法。还讨论了大挠度对载荷的影响。
The approach is based on large deflection characterisation of a curved beam, coupled with fracture mechanics concepts.
该方法是基于曲梁大变形理论及断裂力学而提出来的。
The strain distribution based on small and large deflection theories of diamond square diaphragm was studied using theories of plate bend.
采用薄板弯曲理论研究了均匀载荷作用下多晶金刚石方膜在小挠度和大挠度下的应变分布情况。
A new approximate formula for the large deflection problem of compression bar with two ends are simply supported is obtained, by the use of Ritz-Galerkin method.
通过非线性振动中常用的里兹-伽辽金法，推出了两端铰支压杆大挠度问题的一个新近似公式，计算结果表明具有较高的精度。
On the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates were obtained.
基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；
A new approach to the solution of large deflection bending problem of thin plates is presented by using boundary element method.
本文提出一个用边界元法求解薄板大挠度弯曲问题的新途径。
This paper gives the exact solution of large deflection of circular sandwich plate under the action of uniform lateral load by the method of power series.
本文应用幂级数方法求出了在均布载荷作用下夹层圆板大挠度问题的精确解。
In this paper, the elastic rod theory is applied to establish a static analytical mechanical model for a small strain, large deflection Marine pipeline during installation in ocean.
本文运用弹性杆理论建立了小应变、大挠度铺设过程中海底管道的静态分析力学模型。
To begin with, in this paper, the displacement governing equations and the boundary conditions of nousymmetrical large deflection problem of circular thin plates are derived.
本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件。
We investigate the effect of nonlinear curvature on vibrations of an elastic simple supported beam and roller with large deflection.
本文研究由于大挠度引起的曲率非线性对简支梁振动的影响。
The solution of large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure under simply supported boundary condition is obtained in this paper.
本文给出了正交各向异性变厚度周边简支圆薄板在均布载荷下大挠度问题的解。
When the deflection is sufficiently large, its shape of deflection may be quite different from those of small deflections.
当挠度相当大时，其形状将变得与小挠度大相迥异。
The problem of solving large deflection plate by the variational method is changed into that of solving systems of cubic algebraic equations with multi-unknown quantities.
采用变分法求解薄板大挠度问题的高级近似解时将导致多元三次代数方程组。
In this paper, we analyse the large deflection problem of the shallow spherical shells with variable thickness by means of boundary element method.
本文利用边界元方法分析了变厚度扁球壳的大挠度问题。
The high specific weight tungsten alloy material has good plasticity, large strength, large deflection and small residual force.
本发明高比重钨合金材料塑性好、强度大、变形量大及残余力小。
In this paper a hybrid perturbation - weighted residual method is proposed for the large deflection of a circular.
本文采用摄动-加权残值联合法求解圆板大挠度问题。
The development of flexure hinges with large deflection, low stress, small parasitic center shift has always been a difficult problem.
大变形、小应力、小中心漂移的柔性铰链的研制一直是柔性铰链研究的难题。
The development of flexure hinges with large deflection, low stress, small parasitic center shift has always been a difficult problem.
大变形、小应力、小中心漂移的柔性铰链的研制一直是柔性铰链研究的难题。
应用推荐