• Joint strength has high quality.

    联合实力品质

    www.sp3001.com

  • Joint strength relates to joint area and atomic binding strength.

    接合强度接合面积原子结合强度有关

    dict.cnki.net

  • The paper points out, that both joint strength and weldability should be considered, while selecting welds.

    指出焊缝选择考虑连接强度考虑加工的可能性。

    dict.cnki.net

  • After inspected by SEM, the results indicated that the porous surface tubes sintered by the new process had high quality and strong joint strength.

    采用扫描电子显微镜SEM表面多孔进行检测结果显示工艺烧结表面多孔质量结合强度

    dict.cnki.net

  • Choosing a appropriate thickness filler metal for brazing metal-ceramic can decrease the residual stresses in the brazed joints and improve the joint strength.

    同时,选择合适厚度钎料降低钎焊接残余应力改善接头连接强度

    dict.cnki.net

  • Combining experimental and numerical simulation methods, the effects of weld-joint strength matching on the crack tip opening displacement (CTOD) of three point bending specimen are investigated.

    利用试验研究数值分析方法模拟焊接接头三点弯曲试样不同强度组配裂纹尖端张开位移CTOD影响进行研究

    dict.cnki.net

  • The effect of electromagnetic force on the splash, joint strength and welding process of capacitor discharge projection welding is studied.

    研究焊接过程焊接电流产生磁力电容储能喷溅接头强度焊接工艺影响

    dict.cnki.net

  • Shear results of joints show that joint strength can be increased obviously in a certain range with composite soldering materials.

    接头抗剪强度表明一定范围内采用复合钎料可以明显提高接头强度

    dict.cnki.net

  • The results showed that electrode by cryogenic treatment could visibly improve the spot welding procedure and raise joint strength for galvanized sheet.

    试验结果表明电极深冷处理改善镀锌钢板点焊工艺提高点焊接头强度,从而提高点焊质量。

    dict.cnki.net

  • The influence of bismuth in silver filler metals on spreadability and joint strength are studied.

    研究了基钎料杂质元素钎料铺展性能接头强度影响

    www.dictall.com

  • Results indicated that, within certain range, the joint strength increased with the increase in weld thickness.

    试验发现一定钎缝厚度范围内随着厚度增加接头强度随之提高

    dict.cnki.net

  • By analyzing the factors affecting the joint strength of transportation belt, and taking into account production requirements, methods of enhancing the joint strength of the belt are suggested.

    通过分析影响运输胶带接头强度因素结合生产实践,提出提高运输胶带接头强度方法

    dict.cnki.net

  • And it is observed that laser power is the ultimate affection of joint strength, the defocusing amount is the weak influence, and the welding speed between the former affection factor.

    进一步分析发现激光功率接头强度影响最大焊接速度影响仅次于激光功率影响最小。

    dict.cnki.net

  • The test results indicate that cooling beginning temperature after brazing is most influential to its joint strength, then the cooling hours and finally the way of dehydrating before brazing.

    试验结果表明炉中冷却焊缝焊接强度影响最大冷却时间次之,脱水方式焊接强度影响最小。

    dict.cnki.net

  • This paper investigates the influence of rare earth on the wettability, joint strength and flowability of Sn-Ph solders containing 15% and 30 % Sn.

    研究稀土15%30%钎料系统润湿性、填接头强度影响

    dict.cnki.net

  • Where thickness characteristics AT the joint are more important than strength, a thinner welder is possible AT reduced joint strength.

    如果焊缝厚度强度重要降低强度条件下可使焊缝

    dict.ebigear.com

  • For verification, experiments were performed on the joint strength. The analytical results were consistent with the experimental ones.

    不引起较大胶层缺陷条件下采用较厚胶层提高劈裂接头强度有利,实验结果数值分析相吻合

    dict.cnki.net

  • Furthermore, the formation of cracks results in the degradation of solder joint strength, but affects mildly to the electrical properties.

    裂纹产生导致了两焊点强度降低电性能影响甚微

    dict.cnki.net

  • The efficiency of passing beam web and taper flange in enhancing joint strength are also investigated through tests.

    实验来厘清贯穿腹板扩大梁翼板断面梁柱接头中所扮演角色。

    danci.911cha.com

  • The larger the plastic deformation of the buffer layer, the higher the joint strength.

    缓冲塑性变形愈大接头强度

    dict.cnki.net

  • With the increasing of the deformation rate, the interfaces were contacted soundly and the joint strength was increased.

    变形率增加界面紧密接触接头强度增加

    dict.cnki.net

  • From a yield line model used for calculating RHS-joint strength, a stiffness model is developed for a stepped T-type RHS joint , and a stiffness formulas is established.

    计算节点强度塑性铰线模型的基础上,建立了不等宽T方管节点在支杆轴压荷载作用下的刚度模型,推出了刚度简化计算公式

    www.dictall.com

  • Numerical and experimental methods were employed to investigate the effect of the spot pitch on the stress and strain distribution and the joint strength.

    采用数值分析试验研究方法考察焊点间距种胶焊中应力应变分布接头强度影响

    www.ilib.cn

  • To gain good joint strength, the pulse peak power and defocusing distance should be chosen appropriately to implement welding in keyhole mode, and moreover, pulse duration should not be too long.

    获得较高连接强度使峰值功率离焦适当配合,实现熔焊模式进行焊接,而脉冲宽度不宜

    www.jgjs.net.cn

  • The results show that the electromagnetic force is the main factor which makes the splash more terrible, the joint strength decreased and it has a certain effect on the applicable charging voltage.

    结果表明磁力促进喷溅重要因素因而也是造成接头强度下降重要因素电磁力适用充电电压一定影响。还探讨了之相关的一些其它问题。

    www.chemyq.com

  • Pressure brazing was employed to increase the joint strength by the plastic deformation of the buffer layer and the decrease of the residual stresses.

    利用压力钎焊促进缓冲产生塑性变形降低接头残余应力提高接头强度

    blog.163.com

  • The results show that the surface treatment before plating and the electroplating materials have great effects on the joint strength;

    研究表明, 基体材料表面处理材料电解液的选取连接强度有着明显影响

    www.chemyq.com

  • Based on the analytical model used to predict the strength of the mechanical clinched joint, the design method of clinching tools that can satisfy the required joint strength is proposed.

    基于解析模型用于预测机械强度关节浦发银行设计办法工具能够取得满足所需结合力气办法

    www.pjx8.com

  • Based on the analytical model used to predict the strength of the mechanical clinched joint, the design method of clinching tools that can satisfy the required joint strength is proposed.

    基于解析模型用于预测机械强度关节浦发银行设计办法工具能够取得满足所需结合力气办法

    www.pjx8.com

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定