The component parts and control principle of pulsed SAW inverter power source are mainly introduced in the paper.
本论文主要介绍了所研制的单片机控制逆变埋弧焊机的组成结构和控制原理。
The LDC filter is introduced into a rc welding inverter power source and the voltage ripple of the DC line is decreased.
在弧焊逆变电源中采用LD C滤波电路，可以降低直流线上的电压纹波。
The design procedures and example of resonant converter used in arc welding inverter power source are proposed in this paper.
本文提出了用于弧焊逆变电源的谐振交流器设计思路和实例。
In this paper, the control system of IGBT inverter power source with microcomputer control for pulsed MIG welding is introduced.
介绍了自行设计开发的微机控制的脉冲MIG焊电源控制系统。
This paper presents hardware and software design processes on control system of the soft-switching arc welding inverter power source.
给出了软开关弧焊逆变电源控制系统的硬件系统设计和软件系统设计。
The results show that these modules have stable performance and can meet the inverter power source technology performance requirements.
研究结果表明，这些模块性能稳定，达到了逆变电源技术性能要求。
This procedure has been in Shandong scenery electronics company inverter power source and on the adoption and use of the use, literacy absolutely reliable.
本程序已在山东风光电子公司的变频器和功率信号源上通过并使用使用，读写绝对可靠。
The basic work principle and structure, the concrete circuit, the control and the protection of the inverter power source were studied so as to provide a good basis for devel…
结果表明，该电源成功地进行了逆变，控制及其保护电路可以保证主电路正常工作，电源性能良好。
Microcomputer controlled arc welding inverter power source can raises greatly controlled level of pulse MIG welding for its flexible control, high accuracy, high system response.
采用微机控制的弧焊逆变电源控制灵活、精度高、系统响应高的特点，能够极大提高脉冲MIG焊的控制水平。
A microcomputer controlled IGBT inverter power source for pulsed MIG welding is developed. It realizes the self adaptive control and closed loop control of arc voltage in pulsed MIG welding process.
建立了微机控制和IGBT逆变式脉冲MIG焊电源系统，实现了MIG焊接过程弧压自适应闭环控制。
This paper introduces inverter technology and USES IGBT as power component to research high performance and high efficiency CO2 arc welding power source.
为了研究高性能、高效率的CO_2焊接电源系统，本文引入了逆变技术，并使用IGBT作为功率器件。
To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for dc-ac power conversion needed in fuel cell applications.
以应用于燃料电池逆变功率变换的阻抗源逆变器为例，分析了其工作原理和控制方法。
The AC-DCAC voltage source inverter composes the main circuit of this variable frequency system and CPLD is the logic control device of the power device (IPM).
该变频调速系统主电路采用交-直-交形式，以(CPLD)作为调速系统逆变电路功率开关器件(IPM)的逻辑控制器件。
The high-power IGBTs are adopted to design the dual inverter arc-welding power source for variable polarity pulse MIG welding.
提出采用大功率IGBT设计变极性脉冲MIG焊双逆变弧焊电源。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时，系统以最大效率运行的节能控制方式。
The signal power supply that this thesis proposed is a frequency variable power source used in test field. This thesis concentrates on analysis and designing the nuclear part: Inverter.
本文的信号电源就是变频电源在测试领域的应用，本文就信号电源的核心逆变器部分做了详细的分析和设计。
This paper presented an IGBT inverter for high voltage pulse source. The experimental results demonstrate a good harmonic elimination for power input and quality output.
介绍了采用IGBT逆变电路的高压脉冲电源的设计和电路构成。该电源可以减少电源对进线电源的谐波干扰，提高电源的品质，减少输出电压的交流分量。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
逆变式弧焊电源是新一代的弧焊电源，其特点是速度快，直流输出电流波纹小，电弧稳定，质量小，体积小，能耗低。
Consisting of a rectifier, charger, battery bank, inverter, monitor and other devices, UPS can offer the energy storage with constant voltage and frequency power source for the electrical load.
UPS是一种以整流器、充电器、电池组、逆变器、监控器等装置组成的、能够为电气负载提供恒压恒频电源的储能设备。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
The filtermainly includes a voltage-source inverter and three identical control inductors that are connected in series with the power-line.
新型滤波器的主体包括电压源型逆变器和串联连接在电网中的三个大小相等的控制电感。
It based on the researches abroad and home, Designded Contactless Inductive Power Transfer system From reality, which includes Inverter source, detachable transformer and other key components.
本论文在国内外研究成果的基础上，从实际出发，设计了非接触式电能传输系统，包括逆变电源、可分离变压器等关键部件。
A kind of inverter TIG welding power source for thin plates welding is introduced.
介绍一种用于薄板TIG焊的逆变电源。
This paper introduces the system of single phase large power source varied frequency for heating, contains rectifier, filter, inverter and control circuit etc.
介绍了大功率单相变频加热电源的系统组成，包括整流、滤波、逆变和控制电路等部分。
The design principle on EMC of input for inverter welding power source is analyzed in this paper, and some methods for restraining EMI are put forward on the basis of the practices.
分析了逆变焊接电源输入端e MC设计的原理，并在一些实践的基础上提出了具体的抑制eMI的措施。
Inverter spot welding power source is one of important directions in the studies of the resistance-welding field.
逆变式点焊电源是电阻焊领域研究的重要方向之一。
With technology of DC chopper and H-bridge inverter used, IGBT is used as DC chopper and IPM is used as H-bridge inverter to realize a small volume of the power source.
采用了直流斩波和全桥逆变技术，以IGBT为直流斩波元件、IPM模块为全桥逆变元件实现了高压电源的高效小型化。
The resonant soft switching inverter arc welding power source uses LCL type structure in the main circuit, and selects phase shifting pulse wide modulation technique in the control system.
研制的谐振式软开关弧焊逆变电源，主电路采用新型LCL结构，控制系统选用恒频移相调脉宽控制方案。
The resonant soft switching inverter arc welding power source uses LCL type structure in the main circuit, and selects phase shifting pulse wide modulation technique in the control system.
研制的谐振式软开关弧焊逆变电源，主电路采用新型LCL结构，控制系统选用恒频移相调脉宽控制方案。
应用推荐