Laps may be made either by intermeshing or by layering of the fabrics (Figure 8.10).
搭接可由可以通过啮合或分层构造（图8.10）。
Knitting is defined to be the formation of fabric by the intermeshing of loops of yarn.
针织被定义为由线圈相互穿套形成织物的过程。
The key parts of twin screw kneader are a couple of intermeshing screws, just like the heart of the screw kneader.
双螺杆捏合机最核心的部件是一对相互啮合的螺杆，就如同双螺杆捏合机的心脏一样。
In this article, taking the close-intermeshing corotating bon-screw as an example, we analyze its intermeshing mechanisms by using AME.
本文以紧密啮合同向平行双螺杆为实例对其啮合机理和三维实体造型原理进行了阐述。
This thesis concentrates on simulation of Non-Newtonian isothermal flow in kneading block in closely intermeshing co-rotating twin screw extruders.
本文主要就全啮合同向双螺杆挤出机捏合块流道中熔体全充满区的流动进行了全三维非牛顿等温模拟。
The results show that a large velocity gradient emerges in the intermeshing region of the screw reactors, which is helpful to mix materials sufficiently.
结果表明，螺杆反应器的啮合区具有较大的速度梯度，有利于物料的充分混合。
Solid particulate conveying characteristic is given by backwards leakage flow rate through intermeshing region and formulated as a conveying efficiency d.
粒子的固体输送特性，在啮合段形成的返向漏流速率是依靠螺杆的设计参数和质量密度。
The feeding method using intermeshing helical roll has advantages over that using the conventional roll in working capacity, feeding stability and unit energy cost.
实验结果表明，在生产能力、喂料稳定性和能量单耗方面，螺旋啮合辊喂料方法优于传统的旁压辊喂料方法。
Our engineering team will assess your application to select the appropriate agitation system - single, twin or intermeshing agitators - for optimal mixing performance.
公司的设计团队将对客户申请进行评估，以使客户玄色适合的搅拌系统-单机搅拌、双机搅拌或混合搅拌，以便增强搅拌效果。
Two methods were applied to fit surfaces of the tetrahedral gap of an intermeshing co-rotating twin-screw extruder. The surfaces are irregular border's parameter domain.
文中利用了两种对非规则边界参数区域进行拟合的方法，对同向双螺杆挤出机四面体间隙进行了拟合，并建立了一种曲面拟合误差测量的新方法；
The effects of screw speed, salt (0 ~ 3%) and sugar (0 ~ 8%) contents on the extrusion of rice flour using a corotating, fully intermeshing twin-screw extruder were studied.
研究了在使用旋转型全隔行式双螺杆挤压机时，螺杆速度、盐(0 ~ 3%)和糖(0 ~ 8%)对米粉挤压的影响。
Axial circle flow was introduced. The isothermal flow analysis of non-Newtonian fluid in axial circle region of a non-intermeshing counter-rotating twin-screw extruder was concerned.
引入了轴向循环流动的概念，且利用ANSYS有限元分析软件对非啮合双螺杆挤出机轴向循环流道中的非牛顿流体等温流动进行了三维模拟分析。
Also, the solution to the intermeshing condition of the two cross section curves under either same or different speeds is provided. Cross section curves for practical instants are plotted.
初步解决了在相同或不同转速下，两条端面曲线啮合的条件。
According to the intermeshing mechanisms of co and counter rotating twin screws, the 3D solid modeling of twin screw was realized by using Mechanical Desktop(MDT) of AUTODESK in this paper.
本文根据双螺杆横截面几何造型方程，运用MDT软件包，实现了同向和异向旋转双螺杆的三维实体造型。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Twin screw refining extruder works at high consistency and is an energy and water saving refining machine, it is a co-rotating and intermeshing twin screw extruder which is special for pulp refining.
双螺杆磨浆机是一种同向旋转、啮合型磨浆专用的双螺杆挤出机。根据相对运动原理得到的双螺杆磨浆机的螺纹曲线比较复杂，不利于加工制造。
Twin screw refining extruder works at high consistency and is an energy and water saving refining machine, it is a co-rotating and intermeshing twin screw extruder which is special for pulp refining.
双螺杆磨浆机是一种同向旋转、啮合型磨浆专用的双螺杆挤出机。根据相对运动原理得到的双螺杆磨浆机的螺纹曲线比较复杂，不利于加工制造。
应用推荐