注射环节的控制。
Set up, implement and optimize injection process.
制定、执行和优化注塑成型工艺。
Set up, implementation and optimize injection process.
制定、执行和优化注塑成型工艺。
Injection process simple, easy to operate, no anesthesia.
注射过程简单易操作,不用麻醉。
The plasma melt injection process was analyzed theoretically.
对熔-喷过程进行了理论分析。
The cored wire injection process was used to produce vermicular cast iron.
应用喂丝工艺生产蠕墨铸铁。
They also have a pending patent on part of the injection process they are developing.
他们还拥有正在开发尚待批准的注入过程部分专利。
Liquid silicone rubber injection process, equipment and characteristics were reviewed.
介绍了液体硅橡胶的成型工艺、成型设备及其特点。
Polymer is a very expensive material and the injection process is a long complex process.
聚合物是一种昂贵的化学产品,并且其注入是一个漫长而复杂的过程。
Continuously improve injection process to reduce cycle time, scrap, and to improve quality.
负责工艺参数的持续改善来减少成型周期、报废和提高质量。
A type of inert gas injection process that USES foam to control nitrogen mobility and channeling.
一种利用泡沫控制氮气流度和窜流的惰性气体注入过程。
Toe box area utilizes a unique dual injection process which offers greater flexibility and comfort.
鞋头采用了独特的双区注入进程提供更大的灵活性和舒适性。
The injection process of the plastic three-way pipe was analyzed, and the injection mold was designed.
对塑料三通管进行了工艺分析,并设计了注塑成形模具。
The analytical results can be used in the defect correction and injection process parameters' setting.
通过对实验结果的分析,为注塑缺陷的消除和注塑参数的设定提供了有益的参考。
Slanting gate cover is used, and the injection process conditions of this mold are introduced in details.
使用了倾斜浇口套,详细介绍了该模具的注射工艺条件。
Achieve the optimization of the injection process conditions, shorten production time and improve part quality.
可以达到对注塑工艺条件的优化,缩短生产时间,提高制件质量。
The discussion of water injection process to seal leakage occurred in LPG tank was carried out in this article.
讨论了LPG贮罐发生泄漏事故时采取的注水堵漏工艺。
Injection process of machining technics demanding, the demand is higher, metal material strength relative to some low.
注射工艺苛刻、机加工工艺要求较高,相对于金属材料强度有些低。
The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described.
介绍用喂线球化工艺生产优质铸态铁素体球墨 铸铁的质量控制要点。
The problem of scaling in oilfield injection process is common. It can occur in the bottom and every part of the shaft.
结垢是油田注水生产过程中普遍存在的问题,可以发生在地层和井筒的各个部位。
For a severe conglomerate reservoir heterogeneity, cyclic water injection process may substantially enhance oil recovery.
对于非均质程度很高的砾岩油层,采用周期性注水方式可以大幅度地提高原油采收率。
Delivery valve calibration in diesel is tested and studied in multi-aspects to explore its mechanism and effect on fuel injection process.
本文对柴油机喷油过程中的出油阀校正问题进行了多方案的试验研究,探讨了出油阀校正的机理和出油阀校正对喷油过程的影响。
The oil extraction and injection process was not changed , then to qualitatively and quantitatively compared to armeniacae amarum injection.
挥发油的提取和注射剂的制备工艺不变,然后对柴胡注射液进行定性定量比较。
In this thesis, simulation on intake and injection process of the TY3100 non-road diesel engine was carried out by using CFD software STAR-CD.
本文利用STAR - CD软件对非道路用柴油机TY 3100的进气压缩及喷雾过程进行了三维数值模拟研究。
With this technology the resin injection process is realized. There are possibilities in the assembly by means of automated sewing technology.
采用这项技术使得树脂的注入得以实现,而且还有可能通过自动缝纫技术进行装配。
The research process and application of the vermicularizing alloys used in the cored-wire injection process have been introduced in this paper.
介绍了喂线蠕化工艺所用蠕化剂的研制过程及应用效果。
Mainly discuss the Plastic Tank Flap injection process. and how to use CAE in analysis product manufacture. And how to ensure production not deformation.
主要论述了塑料油箱盖的注塑成型工艺,并就如何例用CAE分析论证产品的工艺性、以及如何保证产品的不变形进行了说明。
Taking the plastic injection process of flat part as an example, a new criterion and mathematical model of the gate location optimization method were put forward.
并以等厚平板制件单浇口注射成型工艺为例,建立了针对制件不同几何特征要求的最佳浇口位置的描述方式及相应的数学模型,并给出了优化算法;
Taking the plastic injection process of flat part as an example, a new criterion and mathematical model of the gate location optimization method were put forward.
并以等厚平板制件单浇口注射成型工艺为例,建立了针对制件不同几何特征要求的最佳浇口位置的描述方式及相应的数学模型,并给出了优化算法;
应用推荐