The technological characteristic of computer button, the design and condition of injection forming were analyzed.
分析了电脑按钮塑件的工艺特点、成型方案及注射成型条件，并详细介绍了模具的设计要点。
Structure design, mould design and manufacturing, injection forming and second processing of thin lens are introduced.
介绍薄型透明片的结构设计及模具设计制造、注射成型、二次加工。
The paper Introduced a manufacturing process for production of cer amic fiter candles used for water purification by mortar injection forming.
介绍了一种采用注浆成型工艺生产水净化用陶瓷滤芯的制备工艺方法。
The cause of usual molding fault in the course of injection forming, such as the short shot, the viscous flow and the sedimentation tache, was analyzed.
对注射成型过程中常见的成型缺陷(如短射、滞流和沉降斑)的形成原因进行了分析。
The paper analyzes the reason for more power consumption of conventional dual vane pump system set in model XS—ZY—125 plastic injection forming machines.
本文针对XS—ZY—125型塑料注射成型机，分析了现行通用的双联泵供油液压系统耗能大的原因。
Through analysis on the structure of miner's lamp lens and problems in injection forming, an injection mould structure and its operating process were determined.
分析了矿灯透镜产品结构以及注射成型存在问题，确定了该类塑件的注射模结构以及模具工作过程。
This paper aimed at the injection forming of a kind of thin and long plastic tube, and it also gives a successful example of one mould for four parts and loop injection.
针对一种细、长且薄的管状零件的注塑成型，给出了一种一模四件、环形浇注的成功实例。
The company was established in 2004, the company has the world first-class precision mould processing equipment and dozens of domestic advanced injection forming machines.
公司成立于2004年，公司拥有世界一流的精密模具加工设备和数十台国内领先的注塑成形机。
Through study on the structure of children potable water cup and existed technology problems in injection forming, an injection mould with one module and two cavities were determined.
通过对饮水杯盖产品结构和注射成型的工艺分析，确定了该塑件的注射模结构为一模两腔。
In mice that had been pre-engineered to develop breast cancer, an injection of the protein stopped the cancer from ever forming.
在预制标准间培养了乳腺癌细胞的老鼠身上，注射该种蛋白质，以阻止癌症的不断生成。
Sputtering is now widely applied on cutting tools, forming tools, injection molding tools, and common tools such as punches and dies, to increase wear resistance and service life.
现在反应溅射法已被广泛应用于切削刀具、成型工具、注射模具和诸如冲头和冲模之类的通用器具，以增强其耐磨性和使用寿命。
Research on the injection molding non-ret urn valve was undertaken to improve the forming mold accuracy with minimal cost.
对注射成型止逆环的研究承担了用最小的成本来提高成型精确度的任务。
Gas assisted injection moulding is a advanced plastics forming technique.
气体辅助注射成形是一种先进的塑料成形工艺。
The forming process for the medical one_off plastic tweezers and the structure of the injection mould were introduced.
介绍了医用一次性塑料镊子的成型工艺及注射模结构，模具试模一次成功，成型塑件满足用户要。
Rich experience in all plastic production processes such as injection mold, vacuum mold, forming, plastic extrusion& fabrication etc.
深谙各种塑料产品之加工工艺，如普通注塑，真空注塑，塑料挤出，热加工等。
In case of thin wall forming, increase injection moulding flowability, product quality, and strength; incase of thick wall forming, decease the injection moulding period by more than 60%.
使薄壁成型提高注塑流动性，提高产品品质和强度。使厚壁成型注塑周期可降低60%以上。
The injection molding test has been carried out - the test shows that the injection pressure is low, the forming cycle is short and the production efficiency is high.
试验表明热流道注射成型注射压力低、成型周期短、生产效率高。
The technological characteristics of spare parts of the plastics of tap ware analyzed. The structure and working process of the injection mould for forming tap ware introduced .
分析了水龙头的塑件工艺特点，介绍了水龙头注射成形模结构及模具的工作过程。
The effect of forming temperature, injection pressure and piston velocity on the filling ability of semi-solid A356 aluminum alloy slurry were investigated.
研究了半固态A356铝合金浆料的成形温度、压射比压和压射冲头速度对半固态A356铝合金流变压铸充填性的影响。
After an analysis on the forming process of an automotive clarifier component, the production plan was determined and a two-step parting type of injection mould was developed.
通过对汽车净化器塑件的工艺分析，确定了塑件的生产方案并设计了二次分型注射模。
Inject molding is an important way for plastic forming, and technological parameters have significant effects on the quality of injection molded parts.
注射成形是重要的塑料成形方式之一，工艺参数对塑件质量有重要影响。
An injection mould with half-parting inlaying structure was developed based on the analysis on forming process of wiring terminal positioning fixture with nine-thread pedestal.
通过对九线基座、接线柱定位夹具注射模镶件的工艺分析，确定了成型镶件分半镶拼式结构。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
分析了螺纹盖的成型特点，设计了螺纹盖注射模具。
Two types of runner system of injection mould were briefly stated. A new thermal insulation runner system was developed and applied to the forming of large-scale injection molding parts.
简述了注射模两大类浇注系统，介绍了一种新型的绝热流道浇注系统，并成功应用在大型注射件的成型上。
The forming methods of microcellular plastics include batch microcellular foaming, continuous extrusion, injection molding and phase separation.
微孔塑料的成型方法主要包括间歇成型法、连续挤出成型法、注射成型法和相分离法等，并且各有优缺点。
The forming methods of microcellular plastics include batch microcellular foaming, continuous extrusion, injection molding and phase separation.
微孔塑料的成型方法主要包括间歇成型法、连续挤出成型法、注射成型法和相分离法等，并且各有优缺点。
应用推荐