Distribution characteristic of magnetic field in cold crucible for induction melting;
冷坩埚感应熔炼技术提高了钛铝基合金的熔体质量。
The composite material can be prepared through induction melting and copper mold casting methods.
该复合材料可通过感应熔炼和铜模浇铸的方法制备。
With capasity of 1mt / hour and and so a coreless copper induction melting furnace with 600 kg / hour capacity.
生产能力为1公吨/小时而且无核铜熔炼窑有600公斤/小时的生产能力。
In this paper a series of RE2MgNi9 hydrogen storage alloys were synthesized by vacuum induction melting method.
用真空熔炼法制备了多种贮氢合金原样，分别经不同温度、时间热处理和保护气氛下球磨处理。
The paper recommends the appearance of the water cooled bushing corroded for mains frenquency induction melting furnace.
介绍熔化炉的水冷套发生腐蚀的现象，分析了发生腐蚀的原因，提出了水冷套在制作、安装等方面的改进措施。
The principle and characteristics of some typical methods of induction melting and electromagnetic shaping were discussed.
评述了几种感应熔炼电磁约束成形技术的原理和特点，并对其存在问题及发展趋势进行了讨论。
Alloy coating is prepared by induction melting and casting with the method of direct feeding powder on the surface of a shaft.
介绍了用直接送粉方式在轴类零件表面感应熔铸合金层的工艺原理和实验装置。
In this paper, the structure and operational effects of the induction melting furnace used for continuously producing quartz glass tubes are introduced.
介绍了用于连续拉制石英玻璃管材的感应熔化炉的整体结构和使用效果。
Experimental results show that Quality magnetic alloy 1jha1 can be produced by air induction melting (AIM) and vacuum pouring technologically and economically.
结果显示，采用非真空感应熔炼(AIM方法)加真空浇注生产1 J HA1合金具有工艺上和经济上的可行性。
A prediction model of molten steel temperature based on RBF neural network was developed to reduce cost and improve temperature control accuracy for vacuum induction melting.
针对真空感应炉生产过程中温度测量成本较高及精度较差等不足，建立了基于RBF神经网络的真空感应炉终点钢水温度预报模型。
The interaction between the cerium and tin in steel was studied by vacuum induction melting, Xray diffraction, optical microscopy, electronic probe microscopy analysis, and microhardness tester.
采用中频真空感应熔炼炉、X射线衍射仪、金相显微镜、电子探针、显微硬度计等实验分析方法，研究了稀土金属铈与低熔点金属锡在钢中的相互作用。
The duplex melting process by Blast and Medium-Frequency Induction Furnaces for cast iron production has been studied.
对高炉-中频炉双联短流程熔炼生产铸铁件工艺进行了分析研究。
Magnetic levitation melting and copper mold blow-casting of bulk metallic glasses were realized with ordinary high-frequency induction heating equipment.
采用普通高频感应加热装置实现了大块非晶合金的磁悬浮熔炼和铜模吹铸法制备。
The progress of cupola and induction furnace melting techniques of cast iron in Japan was introduced.
介绍了日本冲天炉，感应电炉的铸铁熔炼技术进展。
With the upgrading of the single equipment, the metallurgical characteristic of modern cupola - induction furnace duplex melting is variable.
随着单体设备的不断更新升级，现代冲天炉—感应炉双联熔炼的冶金特性也发生了很大的变化。
A new type of ramming drier material and its working situation of medium frequency coreless induction furnace for melting aluminum are stated.
介绍中频无心感应熔铝炉用新型干式成型耐火材料和使用情况。
Melting characteristics of MF induction furnace have been expounded with comparison with that of mains frequency induction furnace as well as concerns in operation.
论述了中频感应电炉的特点，与工频感应电炉熔炼特性的比较及其操作注意事项。
Describes how to reduce the ultimate pressure for a vacuum induction getter melting system and discusses the (effects) of the measures taken for improvement of several systems.
介绍降低吸气剂真空感应熔炼系统极限压力的措施和效果。
Material sort, melting capacity, working condition, building process of the crucible and melting process are main factors influencing working life of the crucibles of induction furnaces.
坩埚的材料、容量、工作状态、制作工艺及熔炼工艺是影响感应电炉坩埚使用寿命的主要因素。
The paper describes operation of the detachable zinc melting induction furnace and summaries the practical experience in start-up, routine maintenance and restart at cold state of electric furnace.
叙述了可拆卸式熔锌感应电炉的运行实践，总结了电炉开炉、日常维护、冷炉再启动等实践经验。
Bruce said the main high-speed steel powder metallurgy process: Add a pre-alloyed powder metallurgical high speed steel components, induction-melting furnace, and then made the gas spray granulation.
布鲁斯表示主要高速钢粉末冶金过程是：加入了预合金化冶炼高速钢成分粉末，经过感应炉熔化，然后气体喷雾造粒制作而成。
The body enclosure is one of the main structural parts of medium-frequency induction furnace used for nonferrous metals melting.
炉体外罩是有色金属中频炉熔炼炉的主要结构部件之一。
The utility model relates to the improvement of a temperature oxygen measuring and carbon sampling sensor used for melting steel, in particular to the melting steel in the vacuum induction furnace.
本实用新型涉及用于钢液，尤其是用于真空感应炉内钢液所用的测温定氧、定碳取样传感器的改进。
It was investigated that the short-cut process of producing high quality iron castings by duplex melting with blast furnace and medium frequency induction furnace.
分析了高炉中频炉双联熔炼短流程生产工艺的特点，采用液态金属状态测评系统研究短流程铁液状态。
It was investigated that the short-cut process of producing high quality iron castings by duplex melting with blast furnace and medium frequency induction furnace.
分析了高炉中频炉双联熔炼短流程生产工艺的特点，采用液态金属状态测评系统研究短流程铁液状态。
应用推荐