The scale defect is an important influence factor on surface quality of hot rolled strip.
氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。
There are many influence factors on producing crack of hot rolled strip coil during roll forming.
导致热轧板卷冷弯开裂的原因很多。
Transverse corner cracks on thin slab have a great effect on the edge cracks of hot rolled strip.
薄板坯角横裂对热轧板边裂的影响很大。
The reformation of coiling temperature control system for hot rolled strip was applied double steps.
针对卷取温度控制系统分步改造的特点，实施了双重化改造方案。
Hot rolled strip must be pickled for surface descaling of strip and have good shape prior to cold rolling.
热轧带钢在冷轧前既需要进行酸洗以去除带钢表面的氧化铁皮，也需要有良好的板形。
The edge-masking technology can ease the edge waves of the cooled hot rolled strip with low carbon and thin gauge.
边部遮挡技术能够有效消除低碳钢、薄规格带钢冷态时的边浪。
The structure and installation of the pipe nozzles have important effect on the cooling process of hot rolled strip and plate.
冷却集管及喷嘴的结构和安装对于热轧板带层流冷却效果有重要的影响。
Ferritic rolling is an economical process which is used to produce ultra thin gauge hot rolled strip with better deep draw ability.
铁素体轧制工艺是经济地生产具有良好性能的超薄规格热轧板卷的一项有效的生产工艺。
U-shaped control model for coiling temperature was put forward to improve the high strength and low plasticity of head and tail of hot rolled strip.
针对热轧带钢因卷取后钢卷内外圈与芯部的冷却速度不同，导致带钢成品头尾强度高、塑性低的问题，提出了卷取温度凹型控制模式。
In order to eliminate the red scale on surface of hot rolled strip, the descaling and rolling experiments in lab and industrial trials were carried out.
为了解决热轧卷板生产中出现的表面红色氧化铁皮问题，进行了实验室除鳞热轧实验以及调整轧制工艺的工业性试验。
The article introduces the main composition, characteristics and operating principle of intensified cooling system used for hot rolled strip application.
介绍热轧带钢加密冷却装置的主要结构组成、特点、工作原理。
Hot strip coiling temperature is one of the important parameters of performance index in hot rolled strip, and its control systems of highly nonlinearity.
热轧带钢卷取温度是影响成品带钢性能指标的重要工艺参数之一，其层流控制系统具有高度的非线性。
Porosity cluster of cold rolled sheet is transformed from scars, and it is critical to avoid collision for improving the surface quality of hot rolled strip.
避免钢板撞击精轧机组侧导板是消除结疤缺陷提高热轧板材质量关键因素之一。
The cold bending property is one of the important targets for the hot rolled strip, the cold bending test is required inspection item stipulated in the standards.
冷弯性能是热轧中薄板带材的重要指标之一，冷弯试验是标准规定的必检项目，但在实际生产中经常出现冷弯不合格现象。
A mathematical model for level adjustment on the finishing train is set up on the basis of analysis on the side camber and single edge wave of the hot rolled strip.
本文解析了热轧带钢侧弯及单边浪板形，在此基础上建立了精轧机组进行水平控制的数学模型。
The paper introduces the character of a number of control and combination mode of hot rolled strip profile in foreign country, and its configuration and application in Finish Mill.
对目前国外几种热轧带钢板形控制组合方式的特点及在精轧机上的配置和应用进行介绍。
For the model of laminar cooling control of hot rolled strip, the accuracy of coiling temperature control is unsatisfactory because the heat transfer in the strip itself is ignored.
在热轧带钢层流冷却控制数学模型中，由于忽略带钢内部的热传导而使卷取温度控制精度不良。
The results we obtained prove that the power function curve can not only improve the service life of the backup roll but also benefit the profile and shape control of hot rolled strip.
经试验验证，采用幂函数的辊形优化曲线可提高支撑辊使用寿命，并有利于板凸度和板形控制。
This paper introduces the characteristics, construction methods of the mouldable refractory and its application effect on the roofs of the reheating furnaces in Angang Hot Rolled Strip Plant.
介绍了可塑料的性能特点、施工方法和在鞍钢热轧带钢厂加热炉炉顶上的使用效果。
STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.
钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。
The reason for longitudinal bright trace appeared on the hot-rolled strip is analyzed on the basis of its appearance and regular pattern as well as its control method.
根据热轧带钢生产过程中出现纵向亮带的表现形态和规律，分析了其产生的原因和控制方法，从而达到了提高热轧带钢板形质量的目的。
The system of roll mill press down is controlled to compensate the thickness variation of the hot strip mill so as to improve the hot-rolled strip thickness accuracy.
从各种随机噪声的轧制力信号这一复杂高频干扰周期波中分离出偏心信号，控制轧机在压下系统实现对偏心的补偿，以提高热轧带钢的厚度精度。
The on-line and continuous flatness detection of the hot-rolled strip is one of the most important links in the modern strip shape control system on the hot strip mills.
热轧带钢平坦度的在线连续检测是现代热轧带钢连轧机板形控制系统中重要的环节之一。
As the quality of coal used in coal-fired reheating furnace at hot rolling strip shop is unstable, at the surface of strip steel rolled the red spot inclusions are produced easily.
在热轧带钢车间的燃煤加热炉上由于受到煤质的影响，轧后带钢表面容易产生红斑夹杂。
Production hot rolled ultra thin strip can bring good benefits, but increase the difficulties of rolling.
生产热轧薄带在给企业带来丰厚效益的同时，也使生产难度增加。
Edge heating process can uniform the temperature of hot rolled stip and then benefit the property and dimension precision of the strip.
边部加热对于均化热轧带钢横向温度分布、提高产品性能及尺寸精度具有重要影响。
The effect of annealing temperature on fibrous texture of cold rolled IF steel sheet rolled from strip hot rolled in ferrite region was investigated.
研究了铁素体区热轧if钢经冷轧后，不同退火温度对丝织构的影响。
The mechanism and cause of edge cracking defect of hot-rolled strip in Kunming Iron & Steel co.
对昆钢热轧板卷边裂缺陷机理及成因进行了研究分析，提出了相应的预防控制措施，取得了较好的效果。
The square and rectangular tube of handling container by SPA-H strip can be meet the requirement of custom, and same assortment hot rolled coil strip can be replaced by it.
用该钢带制造的集装箱方矩形焊管完全可满足用户要求，可替代同品种的热轧卷板。
The square and rectangular tube of handling container by SPA-H strip can be meet the requirement of custom, and same assortment hot rolled coil strip can be replaced by it.
用该钢带制造的集装箱方矩形焊管完全可满足用户要求，可替代同品种的热轧卷板。
应用推荐