Phosphating of hot dip galvanized sheets have been used for the production of air conditioners.
将光整热镀锌板磷化技术用于空调器的生产。
Corrosion resistance can be comparable with hot dip galvanizing, or even better than hot dip galvanized steel.
防腐性能可以与热镀锌相媲美，甚至优于热镀锌。
The features in the surface structure of Zn-Al (5%Al) hot dip galvanized sheet and their origins are analyzed.
主要分析了含铝约5%的锌铝合金热镀锌钢板的表面结构特征，并对其结构特征的形成原因进行了分析。
In Asia, prices of hot dip galvanized sheets and electrolytic galvanized sheets have continued to fall since the beginning of this year.
亚洲自今年开始，其热镀白铁皮和电解白铁皮的价格就在持续下跌。
Several native hot dip galvanized lines have been put into production in recent years, and some new lines are being and will be installed.
近年来，国内相继建成多条热镀锌线，还有多条在建和拟建。
Using scaling tension test method simulated the effect of leveling elongations on yield strength ratio of hot dip galvanized dual phase steels.
研究了氮含量对热镀锌双相钢拉伸性能的影响，用定拉伸试验方法模拟了平整伸长率对热镀锌双相钢屈强比的影响。
We suggest that the main structure of the steel using hot dip galvanized processing, so that can greatly reduce the corrosion and rust of steel.
我们建议主结构的钢材采用热镀锌处理，这样能大大降低钢材的腐蚀及生锈几率。
The post-batch-annealing can improve the formability of hot dip galvanized sheet, but the formability is mainly determined by up stream process.
后罩式退火也可以改善低碳铝镇静钢热镀锌板的性能，但其冲压性能主要取决于后罩式退火前的各工序。
Hot dip galvanized process flow: finished Pickling - washing - plating solution - drying - plating - cooling - Medicine - Cleaning - polishing - hot dip galvanized finish.
热镀锌工艺流程：成品酸洗-水洗-加助镀液-烘干-挂镀-冷却-药化-清洗-打磨-热镀锌完工。
The strengthening steel mesh bag using hot dip galvanized high strength steel wire rope as main material, the material of the special manufacturing process and high anticorrosion technology.
该加强钢丝网包采用热镀锌高强度钢丝绳做为系统主要材料，其材料的特殊制造工艺和高防腐防锈技术。
Emphasis is laid on applying the principle of "Slight oxidation-reduction method" to production of hot dip galvanized steel pipes. The manufacturing method, mechanism and test results are introduced.
文中着重介绍了新工艺采用微氧化还原法的原理生产热镀锌钢管的方法、机理、试验情况等。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.
线夹本体和压板可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。
It's action is insulation protection. The body made of high-intensity malleable iron, hot-dip galvanized.
主体材料采用高强度可锻铸铁，热镀锌防锈。
The clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel . All ferrous parts are hot-dip galvanized.
线夹本体和压板为可锻铸铁件，闭口销为不锈钢制件，其余为钢制件、可锻铸铁件和钢制件热镀锌。
Cotter-pins are stainless steel, fasteners are hot-dip galvanized steel, the other parts are aluminium alloy.
闭口销为不锈钢制件，紧固件为热镀锌钢制件，其余为铝合金制件。
The upper cover is aluminium alloy, the other parts are hot-dip galvanized steel.
上盖板为铝合金件，隔板为铝制件，其余为热镀锌钢制件。
Material aluminium alloy , All parts are hot-dip galvanized steel.
铝合金制件，热镀锌钢制件。
The body and jumper clamp are aluminium, the other parts are hot-dip galvanized steel.
线夹本体和跳线夹为铝制件，其余为热镀锌钢制件。
The clamp is aluminium alloy, Dampers are elastomer, the other parts are hot-dip galvanized steel.
线夹为铝合金件，阻尼垫为合成橡胶，其余为热镀锌钢制件。
The body and wedge are malleable iron, the other parts are steel, all ferrous parts are hot-dip galvanized.
线夹的本体和楔子为可锻铸铁，热镀锌。其余为热镀锌钢制件。
The clamp body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.
线夹本体和盖体板为铝合金件，其余为热镀锌钢制件。
The body and cover are aluminium alloy, the other parts are hot-dip galvanized steel.
本体和盖板为铝合金制件，其余为热镀锌钢制件。
The body and keepers are aluminium alloy, dampers are elastomer, the other parts are hot-dip galvanized steel.
本体和压板为铝合金件，橡胶垫为并用胶，其余为热镀锌钢制件。
The body is aluminium alloy, the other parts are hot-dip galvanized steel.
本体为铝合金件，隔板为铝制件，其余为热镀锌钢制件。
The body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.
本体和压板为铝合金制件，其余为热镀锌钢制件。
The clamp is aluminium alloy, the other parts are hot-dip galvanized steel.
线夹本体为铝合金件，其余为热镀锌钢制件。
The clamp is aluminum alloy, the other parts are hot-dip galvanized steel.
线夹本体为铝合金件，其余为热镀锌钢制件。
The inner sleeve is hot-dip galvanized steel, the outer sleeve and lining sleeves are aluminium.
内接续管为热镀钢制件，外续管口及两端衬管为铝制件。
The inner sleeve is hot-dip galvanized steel, the outer sleeve and lining sleeves are aluminium.
内接续管为热镀钢制件，外续管口及两端衬管为铝制件。
应用推荐