Forgings yield parts that have high strength to weight ratio, thus are often used in the design of aircraft frame members.
锻造生产的零件具有较高的强度重量比,所以常被用在飞机结构零件的设计中。
Bogie hearth resistance furnace bearing and susceptible to collision parts with high strength refractory brick masonry, and the use of water glass during building the mud, so the strength increase.
台车式电阻炉的炉膛的承重和易受冲撞部位用高强度耐火砖砌筑,并且在砌筑过程中使用掺水玻璃的的泥浆,所以炉膛强度大幅提高。
Cause of the high cost of materials, spare parts, equipment failure, low efficiency, increase use the Labour strength of the workers.
造成材料、配件费用高,故障多,设备使用效率低,增加了工人的劳动强度。
Screw conveyor and its parts are made of high strength plastic screw conveyor according to the conveyor chain, also known as food screw conveyor, spiral elevator, mainly for conveying large products.
螺旋输送机及其部件按输送链采用高强度塑料制作的螺旋输送机又称为食品螺旋输送机,螺旋提升机,主要适用于输送大件产品。
Clean collapse Cause of the high cost of materials, spare parts, equipment failure, low efficiency, increase use the Labour strength of the workers.
造成材料、配件费用高,故障多,设备使用效率低,增加了工人的劳动强度。
The use of high-strength alloy steel parts is economical because it reduces weight, thereby allowing for more efficient aerodynamic surfaces and providing the potential for increased payload and fuel.
高强度合金钢有重量轻的优势,使用高强度合金钢就比较经济实惠,从而赢得更有效的气动表面并有望增加承载能力和燃油储量。
This make it can be used in corrosion protection treatment of high strength parts which tensile strength is required high.
这使它可以被应用在抗拉强度要求高的高强度零件的防腐处理。
Matchine parts, choose quality stell, the heat treatment of high strength never deformation.
机床部件, 剪板机选用优质钢材,经高强热处理永不变形。
The paper discussed the other parts in the high strength roof bolt support system, including the resin, combined parts and anchor.
论述了高强度锚杆支护系统中的其它构件,包括树脂锚固剂、组合构件和锚索。
To introduce the development and production courses of ML35 steel wire rod for high strength standard parts.
介绍高强度标准件用ML35钢盘条的开发与生产过程。
Automobile parts: brake fluid distribution parts, high strength requirement parts.
汽车零件:刹车油路分岐零件,高强度需求零件。
The technique of warm compaction has huge advantage in manufacturing the low cost, high density, high strength and high fineness powder metallurgical parts.
温压工艺在制造低成本、高密度、高强度、高精度异形复杂的粉末冶金零件方面具有巨大的优势。
Can be adjusted at different angles, all of the use of high-strength standard parts, to ensure firm.
可调节不同角度,全部采用高强度标准件,确保牢固。
The die casting-forging processing is suitable for producing automobile parts with complicated shape and high strength as well as other structure components.
铸锻双控成形工艺主要适合生产形状复杂和高强度要求的汽车零部件和其他结构件。
Structural parts requiring high strength; machine parts, truck chassis parts.
用于需要高强度的结构部分,机械零件及货车底盘。
Shanghai Lingrui Fasteners Co., Ltd is a manufacturer of various kinds of high strength bolts, nuts, washers and various non-standard parts.
上海凌锐紧固件有限公司是一家专业生产和销售各类高强度螺栓,螺母,垫片及各种非标件的制造商。
With high ductility and impact strength. E. g. Automotive safety parts.
高延展性及良好的冲击强度。
Structural ceramics possess such features as high strength, resistance to high temperature, high erosion-abrasion resistance, so structural ceramics are widely used as tribological parts.
结构陶瓷具有高强度、耐高温和耐磨蚀等优点,作为摩擦学部件已得到广泛的应用。
To improve wear resistance and contact fatigue strength of high loaded mechanical parts, one of best effective methods is to improve surface hardness.
要提高承受高应力工件的使用寿命,提高其硬度是有效的方法之一。
The result shows the reason why sealing washer parts destroyed is that carbon content of ST12 steel used is too low. High carbon content and strength material should be used to produce the parts.
结果表明,导致密封圈变形而破裂的原因是选用的ST12钢含碳量太低,应选用含碳量和强度稍高的材料来制造。
Standard parts, fasteners of hot upsetting, such as high strength bolts, nuts and so on.
标准件、紧固件的热镦,如高强度螺栓、螺帽等。
Use high speed oscillation cobbra , ensure all parts of products have same strength during oscillation , prolong tester lifespan, decline failure rate.
采用高速振动头同步振动,保证在振动时各部位的产品受到的力的情况一致,并延长试验机的寿命及故障率的降低。
Our company manages various types of bearings, bearings and high strength domestic standard parts, bearings, such as: SKF.
我公司经营各种型号的各种轴承,国产轴承和高强度标准件,进口轴承如:skf。
Residual stresses are generated in the machined layer for high-speed machining. The residual stresses impacts the working performance and fatigue strength of parts.
高速切削加工时,已加工表面存在的残余应力影响工件的使用性能和疲劳强度。
The die casting-forging processing is suitable for producing automobile parts with complicated shape and high strength as we…
介绍了压铸锻造双控成形技术实现方法和所生产零件的性能。
9: Stir the tube shell parts from high-strength and high wear-resistant materials produced. 10: mixing tube as a whole to adopt automatic submerged arc welding technology.
9:搅拌筒壳体各部件由高强度及高耐磨材质制作而成。10:搅拌筒整体焊接采用自动埋弧焊技术。
9: Stir the tube shell parts from high-strength and high wear-resistant materials produced. 10: mixing tube as a whole to adopt automatic submerged arc welding technology.
9:搅拌筒壳体各部件由高强度及高耐磨材质制作而成。10:搅拌筒整体焊接采用自动埋弧焊技术。
应用推荐