High heat treatment performance of roller sleeve (1), uniform hardness, reasonable hardness gradient, thus ensure the long service life of inlaid backup roller.
辊套(1)的热处理性能好，硬度均匀，硬度梯度从表面层向芯部下降梯度小。因此镶套支承辊的使用寿命长。
So it is meaningful to further study its heat treatment performance by process test, so that the heat treatment process standard is established to meet special requirement.
为此，通过一定的工艺试验对这种钢的热处理性能进行进一步的探索，从而确定特定性能下的热处理工艺规范。
Trying an experiment of heat-treating to the high chromium cast iron samples in different heat treatment processes selected, then doing their mechanical performance experiment.
通过选择不同的热处理工艺对高铬铸铁试件进行热处理实验，然后对该试件做机械性能实验。
The result of XPS experiment has proofed that the performance changed of the Fe-O, Fe-N-O films is because the composition and structure of film has changed after heat treatment.
XPS实验结果证明薄膜性能改变的原因是热处理后薄膜的成分与结构发生了明显的变化。
The article introduced the characteristic and mostly function of the equipment of water-quenching heat treatment of oil-well tubes and production performance by water-quenching heat treatment.
文章介绍了宝钢股份研发的油井管水淬热处理装置特点、主要功能及经水淬热处理后的产品性能。
With the constant improvement to that titanium alloy performance required, except craft of smelting of improvement, employ the heat treatment craft in order to improve its performance.
随着对钛合金性能要求的不断提高，在改进冶炼工艺之外，还要应用热处理工艺以改善其性能。
The corresponding material performance can be achieved through different heat treatment methods.
通过不同的热处理方式可获取相应的材料使用性能。
The product has excellent tooling quality and machining performance, so as to alleviate and avoid the deformation of ejector pin because of heat treatment.
该产品具有良好易切削性能和机械加工性能，从而避免了薄壁推管(司筒)因热处理而产生变形。
As the large castins, lathe bed castings must be subjected to heat treatment in order to improve the performance itself, and improve the intrinsic quality of iron castings.
床身类铸件产品作为一种大型铸件必须要经过热处理才能提高本身的使用性能，改善铸铁铸件的内在质量。
The influence of steel wire mechanics performance nonuniformity mainly has three factors: wire rod quality uniformity, wire drawing technology and dies, heat treatment processing.
影响钢丝力学性能的不均匀性主要有三个方面的因素：盘条质量的均匀性、拉丝工艺及模具、热处理工艺。
PVA concentration, amount of crosslinking agent, the temperature of heat treatment and base membrane which might affect performance of composite membranes, were also studied.
分析讨论了PVA的浓度、交联剂用量、热处理温度及基膜对膜蒸汽渗透分离性能的影响。
With the good combination of auxiliary electric field and heat treatment, the third order nonlinear optic performance can be improved obviously.
采用辅助电场与热处理工艺相匹配的控制技术可以明显提高材料的三阶非线性光学性能。
The dynamic performance, corrosion rate and coking time of the mortar were tested under normal temperature and after heat treatment and corrosion individually.
并用该树脂与固化剂、惰性添料配制了胶泥，测试了其常温、热处理及腐蚀后的胶泥的力学性能、腐蚀率及焦化时间。
After being sintered and the heat treatment and electricity treatment, the performance of these varistors was superior to that of the varistors fabricated by the solid phase method.
元件在烧结后，经过热处理和电老练，其性能较传统的固相球磨制备元件提高很多。
The computer monitoring system based on bus-mastering for heat treatment workshop was introduced and its characteristics and performance were discussed.
介绍了基于总线方式的热处理车间计算机监控系统的构成，论述了该系统的特点及功能。
The article analyses the samples under the three heat treatment systems of inflection test with comparability, and illustrates the relation between metallographic structure and inflection performance.
本文运用金相组织分析的手段，对具有可比性的反弯试验的三种热处理制度下的样品进行分析，展示了金相组织与反弯性能之间的联系。
The microstructure of high performance fire-resistant and weathering construction steel after different heat treatment regimes was studied by using OM and TEM.
利用光学显微镜和透射电子显微镜对不同热处理工艺制度下高性能耐火耐候建筑用钢的显微组织进行了观察和分析。
The effect of the performance of raw powder and process parameter such as sintering time & temperature , heat treatment time & temperature on the plastication of tungsten alloys has been studied.
研究了原料粉末性能、烧结温度和时间、热处理的工艺参数对高密度钨合金的塑性的影响。
In the process of heat treatment, that might make the performance of material or parts degenerate or even discarded.
在热处理过程中，这将使材料与工件性能降低，甚至报废。
After blender liner's low life was analyzed, a method is brought forward involved alloy ingredient and heat treatment process, according to material's performance and working condition.
本研究从工况材质两方面分析了搅拌机衬板使用寿命颇低的原因，针对工况对衬板材质性能的要求，在合金元素和热处理工艺两方面做出改进。
Using different concentration piperazine and IPC or TMC, through changing immersion time, heat treatment time and temperature, composite nanofiltration membrane with good performance was prepared.
用不同浓度的哌嗪水相、酰氯有机相，通过改变两相处理的时间和热处理的时间与温度寻找合适的条件制备性能较佳的平板复合纳滤膜。
Surface heat -treatment technologies have supported the advancement of the automotive products in performance and reliability beside productivity and energy conservation.
表面热处理技术除了在汽车生产率和节能方面起了支撑作用之外，还提高了汽车产品的运行性及可靠性。
After annealing heat treatment, the yield strength of the steel plate reduces to the level of Q195 and the plastic performance has greatly been improved.
经退火热处理，钢板屈服强度降低到Q 195水平，塑性性能也有较大改善。
The material chosen for this paper is NM360A whose heat treatment state is quenching + tempering at low temperature, it has excellent wear resistant performance.
本文所选择的的材料为淬火+低温回火状态的NM360A，具有优秀的耐磨性能。
This product can improve the performance of heat insulating board as well as the bonding strength of anti-cracking mortar. It is suitable for surface treatment of plastic extruded board.
本产品能够改善保温板性能，提高抗裂砂浆的粘结强度，适用于挤塑板的面层处理。
Through the annealing test of 304 stainless steel, high performance access to a comprehensive process of heat treatment parameters, to provide for the production of some reference value.
通过304不锈钢的退火试验，获得了综合性能较高的热处理工艺参数，能够为生产提供一定的参考作用。
The heat treatment processing and performance control of rolling process have been studied in this paper. The results are useful for new-built or modification of cold strip rolling line.
就冷轧板带钢的热处理工艺及其性能控制等轧制生产工艺理论进行了具体的研究和探讨，这对于将要新建或改造的冷连轧生产线均具有实际指导意义。
Wood screw's performance and use: After the heat treatment adds hardly, may achieve above 8.8 levels. May from my factory direct export to the foreign country.
木螺丝的性能与用途：热处理加硬后可达到8.8级以上。可从我厂直接出口到外国。
The machine tools for processing materials via special heat treatment, pollution-free, wear-resisting performance, long service life.
本机对加工物料无污染，经特殊热处理，耐磨性能优越，使用寿命长。
The machine tools for processing materials via special heat treatment, pollution-free, wear-resisting performance, long service life.
本机对加工物料无污染，经特殊热处理，耐磨性能优越，使用寿命长。
应用推荐