Room temperature curing and heat curing.
可室温固化及加热固化。
Used as heat curing adhesives for such hart substrates non-vulcanized silicone rubber and metal.
用于未硫化硅橡胶与金属等硬质基材热硫化型胶黏剂。
Heat curing furnace is an important equipment for forming of glass fiber reinforced plastic products.
加热固化炉是玻璃钢制品成型的重要设备。
Electron beam curing of resin matrix composites is a cost effective method compared with conventional heat curing.
与普通的热固化方法相比，树脂基复合材料的电子束固化是一种成本有效的固化方法。
With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.
与K - 35固化剂组合，形成热固化胶粘剂，即使120度也能保持很高的机械强度。
Curing characteristics of silicone rubber can be divided according to their heat curing silicone rubber and RTV silicone rubber types.
硅橡胶按其硫化特性可分为热硫化型硅橡胶和室温硫化型硅橡胶两类。
Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.
像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。
The role of heat to the cloth layer for curing.
热的作用使布上胶层进行硫化。
A method for impregnating wood as claimed in claim 10, wherein said curing is by the application of heat or light.
一种方法为浸渍木材所宣称的那样，在索赔10，其中，固化是由应用热或轻。
Heat resistance, curing reaction, and morphology of the modified phenolic resin system were characterized by TG, DSC, SEM and tem.
借助TG、DSC、SEM和TEM对改性酚醛树脂体系的耐热性能、固化反应和微观形态进行了表征。
The important thing to know is that heat will not make the printmaking inks water fast; only air curing will do that because the ink contains oils that need to be exposed to air in order to harden.
要知道的重要一点是，热量不会使版画油墨水快，只有空气固化会做，因为油墨包含需要以硬化暴露于空气中的油。
It is found that T-M is storable and thermostable, and has slow and low liberation of heat in the curing process.
结果表明t - M具有优良的贮藏稳定性、热稳定性，固化放热量少、放热平稳。
DOVER series low temperature curing adhesives are one part, low temperature heat curable epoxy.
DOVER系列低温固化胶是单组份、低温热固化改良型环氧树脂胶粘剂。
The results showed that the amount of ATPU curing agent have an obvious influence on the curing reaction heat and curing degree.
结果表明，ATPU的含量对固化放热特征，放热量和固化程度等有显著的影响。
Heavy metal areas should be used for cure evaluation since they require more heat time for curing than do thin metal panels.
对厚金属板区的固化加热时间要比薄金属板区长，对厚金属板区工件要进行固化评定。因为厚板区宽固化加热时间要比薄金属区长。
Chamber or enclosed area for the purpose of curing by heat or energy the coating.
用于加热或能量使涂层固化目的的房间或有限区域。
It has high mechanical strength, toughness, good heat resistance and low shrinkage, good curing characteristics.
它具有机械强度高、韧性好、耐热好及低收缩性、固化性好等特点。
In order to determine reasonable processing parameters, heating of thermosetting molding compound in the mold and that of heat transfer after curing temperature are analyzed.
本文就模压料在模具中加热过程和达到固化温度以后的传热过程进行定量分析，以确定合理的工艺控制参数。
It has good heat resistance, high mechanical strength, curing characteristics and good.
它具有较好的耐热性，机械强度高、固化性好等特点。
It has high mechanical strength, toughness, good heat resistance and high thermal intensity, low shrinkage, good curing characteristics.
它具有机械强度高、韧性好、耐热性好及高的热强度、低收缩性、固化性好等特点。
It has high mechanical strength, toughness, heat resistance, low shrinkage, good curing characteristics.
它具有机械强度高、韧性好、耐热性、低收缩性、固化性好等特点。
General heat release coefficient is used to equivalently consider autoclave radiation and convection of boundary condition during curing process for CFRP pressure vessel.
文中应用总放热系数等效考虑了CFRP压力容器固化过程中热压釜辐射与对流边界条件。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
The curing property of the resin was found to be a little different from that made by melting copolymerization according to the DSC curve, and the cured resins had good heat stability.
DS C曲线显示该树脂的固化能与熔融法得到的基体树脂有所不同。该树脂固化后有良好的热稳定性。
The water soluble paint has strengths such as low VOC, fast curing rate, good resistance to water, heat and corrosion.
该水性涂料有机挥发份含量低、涂膜干燥快，耐水、耐热及耐蚀性好。
A sort of modified epoxy resin and curing agent in terms of its viscosity, tenacity, cold-proof and heat-proof impinge and dipping properties were described.
通过改性环氧树脂及固化剂，实验研究了浸渍胶的粘度、韧性及耐冷热冲击性、浸渍性。
The ink segments are dried on the base layer by UV curing to a height and a hardness sufficient to form a heat stable textured surface adhered to the base layer.
通过UV固化，油墨断片在基础层上干燥成足以形成粘合到基础层上的热稳定的织纹表面的高度与硬度。
The influence of curing reaction heat on curing temperature field of cubic rubber block and tire was investigated.
探讨长方体胶块和轮胎硫化反应热对硫化温度场的影响。
The flow production lines of the curing agent part and the resin part are identical, and the difference lies in that the requirement of the curing agent on the heat is not essential.
固化剂部分流水生产线与树脂部分流水生产线相同，不同之处在于固化剂部分流水生产线对加热器的需要可有可无。
The flow production lines of the curing agent part and the resin part are identical, and the difference lies in that the requirement of the curing agent on the heat is not essential.
固化剂部分流水生产线与树脂部分流水生产线相同，不同之处在于固化剂部分流水生产线对加热器的需要可有可无。
应用推荐