The product encapsulates a double metal temperature controller switch or a temperature fuse in a plastic tube with high frequency heat coupling method, and links lead and ends .
温控器、熔断器组件是将双金属温度控制开关，温度熔断器（温度保险管）采用高频热合的方式密封在一个塑料管（套）中，并接上引线、端子而成的成套组件。
In addition the material physical parameter variation with temperature was considered in the model. The contact resistance and flash melt were considered in the electric-heat coupling model;
模型中考虑了电、热、力的耦合以及材料物性参数随温度的变化，在电热耦合模型中计入接触电阻与闪光烧损对产热过程的影响；
Designers use various methods of thermally coupling the transistor and the tempco, ranging from glueing the two together, to mounting them both on a common heat sink.
设计者使用了各种方法以使晶体管和温度系数电阻达到热耦合，从粘合它们二者为一体，到给它们装上共同的散热器。
Several typical problems of heat seepage mechanical coupling of porous media in asymmetric heat seepage domain are analyzed.
分析了在非对称热渗流域多孔介质中热渗流—力学耦合的几个典型问题。
The cause of turbine stator blades was analyzed on the base of numerical simulation by means of air-thermal coupling for heat transfer and temperature distribution.
在内部流场气-热耦合数值模拟的基础上，研究了某涡轮导向器叶片烧蚀故障的原因。
Research provides the foundation for the water-heat-salt coupling simulation on freezing-thawing soils and the establishment of autumn irrigation schedule in Hetao irrigation District.
该研究结果为河套灌区冻融土壤水热盐耦合模拟的研究和秋浇制度的制定提供了基础理论依据。
The coupling of current, temperature and stress has been proposed in crack arresting by the electromagnetic heat effect at the moment when a pulse current is switched on.
讨论了电磁热裂纹止裂时脉冲放电瞬间的电流、温度和热应力的耦合关系。
How to confirm the internal boundary condition is a difficulty for above fluid-solid coupling heat transfer system.
确定此系统的内部边界条件成为发动机传热研究的难点。
The heat and mass transfer and coupling effect in wood drying were studied by applying the thermodynamics of irreversible processes.
应用不可逆过程热力学研究木材干燥过程热质迁移及其耦合效应。
Finally, a more accurate calculation result is obtative with a full consideration of the coupling term in both ablative equation and heat-conduction equation.
利用烧蚀和导热计算方程组中二者的结合部，通过充分耦合，获得了更准确的预示计算结果。
At last, the authors analyze the future research directions and research highlights, such as the theory and research methods, coupling model, and optimized water-heat structure of desert ecosystem.
最后，该文对水热平衡理论和研究方法、水热平衡耦合模型以及荒漠生态系统的水热结构优化模式等未来的研究方向和重点问题作了分析。
It is difficult to confirm the internal boundary condition for the above fluid-solid coupling heat transfer system.
确定上述固体、流体耦合传热系统的内部边界条件成为发动机传热研究的难点。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
With the FEA software ANSYS, the coupling model of coupling the pressure-prestress-heat stress flat container of three-layer is built using the physical environment approach.
本文运用ANSYS分析软件，利用物理环境分析法建立了三层套组合式扁挤压筒内压-预紧-热载荷耦合有限元模型。
The coupling heat transfer was calculated using fluid area and solid area coupling solution.
采用了流体域与固体域耦合求解法计算耦合换热。
Then we can get the math model of the two kind of constitutive models' heat-mechanics coupling problem by using the balance equation, the heat exchange equation and the constitutive equation.
然后由得到的平衡方程、热传导方程和本构方程建立了两种不同本构模型的粘弹性杆热-结构耦合问题的数学模型。
Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.
采用随机有限元方法， 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析，得到了随机应力应变响应；
The mainly effective factors and rules of contact forging by using the heat-mechanical coupling model were computed.
利用所建立的闪光对焊热力耦合模型计算了顶锻过程中顶锻接触行为的主要影响因素与规律。
In this research, a transient microstructure-prediction program was designed on the basis of coupling a previous heat transfer program.
焊接过程瞬态组织预示程序是在先前的焊接热传导程序基础设计而成的。
Further, after coating a substrate having heat resistance with a silane coupling agent, a layer having functionality is formed.
另外，在用硅烷偶联剂涂覆具有耐热性的衬底后，形成了具有功能性的层。
The paper established difference format of the two kind of constitutive models' heat-mechanics coupling problem and programed MATLAB programme to solve temperature field.
本文建立了两种本构模型控制微分方程的差分格式，并编制了MATLAB程序对温度场进行了求解。
It is difficult to confirm the internal boundary condition for the fluid-solid coupling heat transfer system.
固流耦合的办法可以将固、流结合面上比较难确定的外部边界转化为系统的内部边界。
After coating a substrate having heat resistance with a silane coupling agent, a layer having functionality is formed.
在用硅烷偶联剂涂覆具有耐热性的衬底后，形成了具有功能性的层。
Deformation in railway wheel for heat treatment was analyzed with finite element method, in which the coupling of temperature, phase transformation and stress was considered.
在考虑了温度、相变及应力的耦合作用的基础上，运用有限元法分析了车轮热处理过程的变形。
Experiment results showed that this stabilizer not only had heat stabilization effect, but also had good lubricating and coupling effects.
试验结果表明，该助剂除具有热稳定作用外，还具有很好的润滑性和偶联性。
Based on an axisymmetric unsteady conduction model by FEM, a numerical analysis model of unsteady heat transfer for the piston-liner coupling system of combustion chamber in an I.
本文在轴对称不稳定热传导有限元分析模型的基础上，提出了一个内燃机燃烧室的活塞与缸套偶合系统的不稳定传热数值分析模型。
According to the established whole-coupling heat transfer model, the steady-state heat transfer process in the furnace was simulated.
根据所建立的耦合传热模型，对常压加热炉内的稳态传热过程进行模拟。
According to the established whole-coupling heat transfer model, the steady-state heat transfer process in the furnace was simulated.
根据所建立的耦合传热模型，对常压加热炉内的稳态传热过程进行模拟。
应用推荐