The importance of the balance of heat absorption and heat-removal in the operation of the HGSHP's ground heat exchanger was pointed out.
混合式地源热泵在工程应用时，主要作用之一是维持地埋管换热器的全年热平衡。
When gasoline engine revolution or just engine off, do not have to contact heat-removal components and so on exhaust manifold, when heat engine strictly prohibits opening the radiator cap.
在汽油机运转或刚停机时，不要接触排气歧管等排热零件，在热机时严禁开启散热器盖。
So the design differences are really driven by the mechanism of heat removal in the reactor and how that reactor is operated.
所以，设计的不同是由,除去反应堆热量的原理的不同决定的,还有反应堆运作的方式决定的。
Then you have a decrease in heat removal which is where you're not able to remove as much heat from the secondary system, by the secondary system.
然后再热量除去也会减少，在那里，你们除去的热量不能够，和在次级系统中一样多，通过次级系统。
The most important of which are maintaining your critical safety functions which is reactivity control, core heat removal, secondary heat removal and containment integrity.
最重要的就是维持住，你们重要的安全功能，那就是反应力的控制，核心热量的消除，次级热量的消除，以及容器的完整性。
Now in terms of the removal of heat we've got to not only take that fluid, it's possibly as you can see here a liquid metal.
现在关于热量的除去，我们必须,不只是使用液体，它可能,正如你们在这看到的，液态金属。
Heat removal system, residual heat removal and safety system functional failures.
热量消除热量消除系统，余热消除，和安全系统故障。
But as long as the heat production exceeds the heat removal capacity, the pressure starts increasing as more water boils into steam.
但是，当产生的热量渐渐超过目前的冷却能力，会有大量的水变成水蒸气的状态，使内部的压力增大。
Two reactors, one big steam turbine hall and cooling towers for heat removal.
2个反应堆，1个大蒸汽涡轮，还有除热量的冷却塔。
You have a thermal margin low pressure trip which basically measures the amount or the efficiency of heat removal from the core.
你们会得到热量边缘，低压力差错，基本上测量了核心的热量除去的，数量以及效率。
And we also have a residual heat removal system that also takes the heat from the torus and transfers that heat to an external source providing coolant water to continue to re-circulate the sprays.
我们还有一个余热去除系统，那将凸面的热量除去，并将热量转化为外源，提供冷却剂水，让它能够继续，将喷雾再循环。
The removal of wax from tubing in a well by mechanical knives or scrapers, solvents, chemicals, heat, or bacteria.
用机械刮蜡片或刮蜡器、溶剂、化学剂、热量或者细菌，去除井内油管中的蜡。
The removal of enough heat from water may change it into ice.
如果从水中除去足够的热量，就可把水变成冰。
By heat balance analysis of the whole regenerative system, which is regarded as a closed thermodynamic system, the calculation model on the influence of HPs removal on heat economy of unit is derived.
以汽轮机功率方程和锅炉吸热量方程为基础，并将机组的整个回热系统视为一闭口热力系统，通过对其的热平衡分析，得到了高加切除对机组热经济性影响的计算模型。
The heat transfer model of the discharge has been established, and the removal rate could be significant promoted because of the explosion with the method of thermodynamic finite element analysis.
建立了电火花放电加工的热力学传导模型，通过有限元仿真方法得出具有放电爆炸力的单次脉冲能够明显提高难加工材料蚀除量的结论。
The benchmark problem for GT-MHR plutonium burner accidents is a part of the IAEA Coordinated Research Program(CRP) on "heat transport and afterheat removal for GCR under accident conditions".
气体透平氦气模块堆（GT-MHR）标准题是国际原子能机构（IAEA）关于“高温气冷堆在事故工况下的热传输和余热载出”问题的合作研究计划（CRP）的一部分。
Traditional hydronic sizing methods can be used for selecting pumps, expansion tanks, heat exchangers, and air removal devices, as long as the heat transfer liquid's thermal properties are considered.
传统的液体循环加热体量法在泵、蒸发器、热交换器和空气移动装置的选择中可以应用，在考虑载热流体的热血特性的情况下。
The waste heat of ash and slag of fluidized bed boilers can be recovered by use of slag coolers, which also facilitates the adoption of dry slag removal method and slag comprehensive utilization.
采用冷渣器可回收流化床锅炉的灰渣余热，便于干式除渣及灰渣的综合利用。
This paper analyzes the process of decay heat removal after Chinese Experimental Fast Reactor (CEFR) scram.
分析了中国实验快堆事故停堆后余热的排放过程。
This requirement incorporates design aspects associated with heat transfer, steam supply, and air and condensate removal.
这一需求由热传递、蒸汽供应、以及空气和冷凝水的去除各相关方面的设计组成。
Especial finished parts need precision and have size heat treat film available for film removal, debarring of casting parts.
研磨工件需要有精确尺寸及热处理膜、去黑膜、去黑头、倒角、表面精铸造工件磨光之用。
Spray cooling is an efficient method for high heat flux removal.
喷雾冷却是一种高效的高热流密度散热方式。
Main cause has been analyzed and it resulted from the inadequate heat removal of the steam condenser in gas compressor.
通过分析认为气压机凝汽器取热能力不足是造成真空度低的主要原因。
With simple and easy operation, each part of boots can be ironed by heat and steam, making wrinkle-removal perfect.
即对靴筒的每个部位都能高温蒸气烫平，除皱更完美，操作方便快捷。
Meanwhile, he also stresses the removal of qi stagnation, damp heat and blood stasis.
强调标本结合，注重标实的清除，善于通达气滞、湿热、瘀血。
Removal of the heat resistive element (2) and the electrode (3) is prevented by suppressing the diffusion of the metal component from the electrode (3) to the heat resistive element (2).
通过抑 制上述金属成分从电极（3）向发热电阻器（2）的扩散，能够防止发热电阻器（2）及电极（3）的剥离。
The residual heat removal system with natural circulation is a passive safety system.
采用自然循环的余热排出系统是一种被动安全的系统。
Measures of energy saving for carbon dioxide removal section in Xiangjiang nitrogenous fertilizer plant are introduced and compared with other lower grade heat recovery system.
介绍湘江氮肥厂脱碳节能措施，并与其他的低位热能回收系统进行了比较。
A beneficial approach was carried out to some technique such as high temperature absorption, low level heat utilization and mercury removal from smelter gas.
还对某些问题进行了有益的探索，如高温吸收、低位热能利用、烟气除汞等。
Through checking the heat removal of the catalyst cooler based on running data and considering the changeable feedstock source, it was recognized that the heat removal range was rather narrow.
根据生产数据核算外取热器取热情况，结合装置原料多变的实际，认为其取热范围偏窄。
应用推荐