拆卸十字槽螺丝帽。
Top view of fillister head screw.
槽头螺钉的俯视图。
Top view of fillister head screw. Selection box represents thread diameter.
槽头螺钉的俯视图。选择框代表螺纹直径。
Remove one socket pin head screw, three socket head bolts and gear operator cover.
拆卸一个灯头钉头螺丝,三个套筒头螺栓和齿轮执行机构盖。
Remove one socket pin head screw (c), three socket head bolts (d) and gear operator cover (e).
拆卸一个灯头钉头螺丝(C),三个套筒头螺栓(d)和齿轮执行机构盖(E)。
Ontology head screw conveyor section, the middle section, composed of the end of section three.
螺旋输送机本体由头节、中间节、尾节三种组成。
Combine this with the flat head screw driver for adjusting your carburetor and you have 3 tools in 1.
再加上该单位负责人螺丝刀调整您的化油器和您有3个工具,1。
The first difference is that a torque-limiting screwdriver is useful during placement of the locking head screw.
第一个区别是在拧入锁定头螺钉时的扭矩限制扳手非常实用。
Cup head screws, When should adjust the handwheel on the frame, the first to loosen the screw so that fixed the handwheel.
杯头螺丝;当要调节手轮在机架上的位置时,先要松开此螺丝,以便固定手轮。
The difficulties arising during the removal of a cold - welded locking head screw will attest to the value of using this instrument.
在取出冷焊接锁定头螺钉过程中遇到的困难证实了这种设备应用的价值。
In cases where both - conventional screw and locking head screws are applied - it is necessary to apply the LHS after the conventional screw.
当普通螺钉和锁定螺钉同时应用是,应先使用普通螺钉。
there has no screw thread on the installation hole on head of water-cooling. It's difficult to install it by the screw tap which along the products.
产品有以下缺陷:水冷头上的安装孔没有螺纹,用配带的自攻螺丝安装非常困难。
Top view of slotted head set screw. Selection box represents thread diameter.
一字槽头螺钉的俯视图。选择框代表螺纹直径。
Top view of fluted socket head set screw. Selection box represents thread diameter.
凹槽插口螺钉的俯视图。选择框代表螺纹直径。
Variation of the screw Angle results in reduction of purchase of the locking interface, or cross-threading the head.
螺钉角度的变异会致使锁定界面的减少或跨螺纹的头。
Top view of bevel headed, hexagonal head set screw. Selection box represents thread diameter.
斜切六角螺钉的俯视图。选择框代表螺纹直径。
Top view of square head set screw. Selection box represents thread diameter.
方头螺钉的俯视图。选择框代表螺纹直径。
Top view of cheese head slotted screw. Selection box represents thread diameter.
扁圆头一字槽螺钉的俯视图。选择框代表螺纹直径。
If possible, screw in the junction box and head of the Department points Vaseline coated to prevent rust.
如果可能的话,在接线盒的螺丝和线头处涂上点凡士林,以防再生锈。
Grinding head on, sliding imports of dual-use system linear guide, two-ball screw drive, to achieve the smooth running speed to eliminate mobile space (displacement).
磨头座、滑动系统采用进口的双直线导轨、双滚珠丝杆传动,以达到运行速度平稳、消除移动间隙(位移)。
Expose surface and screw head should be wiped antirust oil in the distend cover after finishing.
完成后在胀套外露表面及螺钉头部涂上防锈油脂。
The response of the polymer melt behavior of orientation for axial vibration of screw in short pipe extrusion die head was studied by the light scattering technology.
利用光散射测量方法研究了短圆管挤出模头中聚合物熔体取向行为对螺杆轴向振动的响应。
The impact of various process conditions on extrusion and pelletizing is studied, including the change of extrusion speed, die head temperature and screw types.
进行了各种相关工艺条件对挤出造粒的影响,包括挤出速度、模头温度及螺杆形式和定型模具对挤出成型的研究;
Cone head drive screw with washer - used on roof for keeping fixing holes watertight.
锥头机螺钉垫圈-用于屋顶保持固定孔水密。
The production line adopts high efficiency extruder, swift net changer and screw plastic blowing head.
生产线采用高效挤出机,快速换网,螺旋吹塑机头。
If neither part is threaded a bolt must be used: this consists of a screw with a hexagonal head.
如果两者皆不的部份被穿线于门闩一定被用:这用一个六角形的头有螺丝钉。
The function of the assembling of the injection mol ding screw head is very important for pressure control during molding operations .
对于成型过程的压力控制,注射成型螺杆头组件的作用非常重要。
Top view of square head set screw.
圆头一字槽螺钉的俯视图。
The flute is located on the screw head, and the inserting recess is located at outer circumference of the flute.
凹槽位于螺丝头 上,嵌槽凹设于凹槽的底部中央,而凸缘位于凹槽的外周缘。
The flute is located on the screw head, and the inserting recess is located at outer circumference of the flute.
凹槽位于螺丝头 上,嵌槽凹设于凹槽的底部中央,而凸缘位于凹槽的外周缘。
应用推荐