This feature allows the kernel to control the graphics hardware after the required components are initialized (such as the PCI bus and graphics card).
此特性允许在所需组件初始化后由内核控制图形硬件(比如pci总线和显卡)。
Cipher Card is a hardware module based on bus interface of computer and offering cryptogram service function.
加密卡是基于计算机总线接口的、提供密码服务功能的硬件模块。
This paper mainly introduces a hardware design of signal conditioning platform based on USB bus technology.
介绍一种基于USB总线技术的信号调理平台的硬件设计方案。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
In chapter two, describes hardware system design of the network-stye instrument bus.
第二章阐述网络式仪器总线硬件平台的设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
This paper presents a kind of training system of tank fire basic exercises based on CAN bus. The overall design, hardware configuration and software functions are discussed in details.
本文介绍了一种基于CAN总线的坦克射击基础练习训练系统，并对系统的总体设计、硬件配置和软件功能进行了具体分析。
Based on the analysis of principle of Universal Serial Bus, this paper discusses the developing technology of hardware and software about USB testing system.
在分析usb通用串行总线工作原理的基础上，讨论了USB测试系统中有关的硬件和软件开发技术。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The flight control system based on CAN bus does not only save hardware cost and installation cost, but also save its later maintenance cost.
基于CAN总线的飞行控制系统不仅可以节约硬件成本和设计、安装费用，同时还可以节约系统软硬件的后期维护费用。
In the aspect of hardware, the modern communications way with Field Control Bus is introduced.
在硬件方面采用了基于现场总线技术的现代通信方式。
This article provides the hardware structure of CAN Bus system, the software designing method and the making strategy of CAN application layer protocol in HEV.
给出了混合电动轿车CAN总线系统的硬件结构、软件设计方法，以及混合电动轿车CAN应用层协议的制定策略。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
The paper introduces the virtues of employing I2C bus in the hardware system design and analyzes its bus standards and electrical characters.
介绍了在硬件系统设计中使用I2C总线技术的优点，对其总线技术标准和电气特性进行了分析。
It is detailed the hardware principle and software programming method of the MVB bus adaptor with USB interface.
详细介绍了具有USB接口的MVB总线适配器的硬件原理及软件编程方法。
The paler amply introduces composing and advantages, and currently disadvantages of field- bus control system FCS from hardware, and software and application in the plant.
结合合成氨厂实践情况，从硬件、软件的角度介绍现场总线控制系统FCS的组成、优点及目前存在的不足。
A hardware design of bus control module in OBS edge node is reported.
给出了一种OBS边缘节点总线控制的硬件设计方案。
The selection principle of bus interface chip and solution of bus conflict are introduced, together with its concrete hardware circuits and software block chart are given.
分析了总线接口芯片选择原则和总线冲突解决方案，给出了系统实现的硬件接口电路和软件实现详细框图。
The dissertation consists of hardware design, driver development, CAN bus control system composing.
本论文包括硬件设计、驱动程序开发和组成CAN总线控制系统三部分。
The hardware design, bus protocol module division and its internal structure are introduced.
介绍该系统的硬件结构、总线协议的模块划分及其内部结构。
Instrument hardware consists of local collection equipment, 485 bus and PC.
仪器硬件由现场数据采集装置、485总线和PC机组成。
CAN bus and its specialties are introduced in this paper. The design included software and hardware for supervisory system of switchgear parameters based on the bus is explained.
本文介绍了一种新型的现场总线—CAN总线，说明了其特点。基于该总线设计了开关柜参数监测系统，包括了软、硬件的设计。
This subject designs the detection system, including mainframe program, auxiliary machinery hardware and program, system bus and sensor design.
本课题完成总线检测系统的完整设计，包括主机软件、从机硬件和软件、总线以及传感器电路设计。
This subject designs the detection system, including mainframe program, auxiliary machinery hardware and program, system bus and sensor design.
本课题完成总线检测系统的完整设计，包括主机软件、从机硬件和软件、总线以及传感器电路设计。
应用推荐