The simplest discharge to produce is the glow discharge.
最简单的放电产生方法是辉光放电。
Amorphous silicon films were fabricated with a dc glow discharge system.
本文介绍用直流辉光放电装置制备非晶硅薄膜。
Contact glow discharge electrolysis is a novel type of electrochemical process.
接触辉光放电电解是一种新型的产生等离子体的电化学方法。
In this paper, a glow discharge plasma source ion implantation technique is described.
本文叙述了辉光放电等离子体源的等离子体源离子注入。
Glow discharge excitation source is one of the main focuses in the research of GD-OES.
辉光光谱仪激发源是辉光光谱仪技术研究的主要热点之一。
The paper gives a brief description of the DC glow discharge cleaning in the HL 1M tokamak.
本文简要叙述了HL-1M的DC辉光放电清洗技术和放电结果。
It consists of the main pumping system, pumping divertor and glow discharge cleaning (GDC) system.
它由真空主抽气系统、抽气偏滤器、直流辉光放电清洗系统组成。
An ozone generator with glow discharge tube has been developed by using glass as dielectric material.
研制成一种以玻璃作为个电材料的管式辉光放电臭氧发生器。
Electric discharge characterized by a cathode fall that is small compared with that in a glow discharge.
与辉光放电相比，阴极位降相对较低的放电形式。
There are strong edge effects in the production of element diffusion into metal by double glow discharge.
在采用双辉光放电实施的离子渗金属加工中，存在强烈的边角效应。
The degradation of Fuchsin acid in aqueous solution by contact glow discharge electrolysis is investigated.
研究了接触辉光放电等离子体降解水体中的酸性品红。
Cathode temperature is one of the most important factors influencing the stability of high current glow discharge.
阴极的温度是影响大电流辉光放电稳定工作的重要因素。
This paper deals with the problems of ionization proportion, ion density and heating work piece on glow discharge.
从理论上研究了辉光放电时的离化率、正离子浓度、工件的加热问题。
Comparing with the conventional cold glow discharge, the hot cathode glow discharge is a new type of gas discharge.
相对于常规冷阴极辉光放电而言，热阴极辉光放电是一种新型放电形式。
Different process parameters were employed in this paper to experiment on ion nickelizing by double glow discharge.
采用不同的工艺参数对工业纯铁进行了离子渗镍试验。
On the basis of the studies above, the minimum power supply frequency favorable to uniform glow discharge was formulated.
在此基础上，根据大气压下有利于均匀辉光放电的放电条件，最终推算出有利于均匀辉光放电的最小电源频率。
Modification effect of hot filament gas discharge PIII was compared with that of radio-frequency (RF) glow discharge PIII.
分析比较了灯丝放电PIII和射频辉光放电PIII对基体表面进行氮离子注入后的改性效果。
A novel microwave plasma-enhanced glow discharge (MPEGD) lamp was used as excitation source for the analysis of solid samples.
报道了一种改进型的微波等离子体增强辉光放电(MPEGD)光源，并将这种级联光源用于固体导电样品的分析。
Using heating substrate, glow discharge and thermal treatment after deposition, the durability of coatings is also very robust.
通过离子轰击、基板烘烤和热处理获得了满意的膜层牢固度。
The ion (n + 2) transport process in cathode dark space of nitrogen glow discharge plasma is studied by using Monte Carlo Simulatoon.
采用蒙特卡罗方法对氮气辉光放电等离子体阴极区离子(N +2)的运输过程进行了模拟。
The principle, discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly.
详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
In AC electrical field, the stable homogeneous glow discharge will appear by using dielectric barrier layer and high-frequency power source.
在交流电场中，利用介质阻挡层和高频激励源，可获得稳定均匀的大气压下辉光放电。
The numerical simulation of CO2 reforming with CH4 to synthesis gas was carried out under the condition of atmospheric abnormal glow discharge.
对大气压反常辉光放电条件下CH4 -CO2重整制合成气反应过程进行了数值模拟。
The principle of glow discharge optical emission spectrometry was introduced in this paper, and was compared with other surface analysis techniques.
介绍了辉光放电光谱技术的原理及与其它表面分析技术的比较。
With the micro-discharge array, the glow discharge plasmas with high-pressure and high-current density can be formed to make DC plasma display panel.
它产生的高气压高电流密度辉光放电等离子体能够用来制作平面等离子体显示或光源。
This article covers the mechanism, advantages of plasma modification, as well as generating methods of direct and alternative current glow discharge.
文中论述了等离子体表面改性的作用机理、优点，介绍了产生大气压直流辉光放电和交流辉光放电的方法。
The polypropylene surface modification is researched using plasma generated by capacitance-coupled RF glow discharge and by high voltage corona discharge.
文本研究了用电容耦合RF辉光放电和高压电晕放电产生的等离子体对聚丙烯材料表面改性。
The polypropylene surface modification is researched using plasma generated by capacitance-coupled RF glow discharge and by high voltage corona discharge.
文本研究了用电容耦合RF辉光放电和高压电晕放电产生的等离子体对聚丙烯材料表面改性。
应用推荐