Based on gear method, this paper presents the numerical calculation method for solving dynamics differential equations of gear systems.
本文基于Gear方法对齿轮系统非线性动力学微分方程进行了数值计算分析。
This paper simplifies the gear change calculation and machine adjustment in machining equiangular helix conical milling cutter with non-circular gear method.
本文着重介绍了用非圆齿轮法加工等螺旋角锥铣刀时,使挂轮计算和调整最简化的问题。
As a kind of general driver machine, gear has its special method of designing and manufacturing.
齿轮作为一种通用的传动机构,有其特殊的设计和加工方法。
If you want to wear every day, the best maintenance method is to tighten the spring every two weeks, to ensure that the normal smooth running gear.
如果每天都要佩戴,最好的保养方法是每两个星期紧一下发条,保证它的齿轮正常顺滑运转。
By means of gear profile statistics to conduct the identification of gear manufacturing process system, a scientific and easy-operation method to assess and control gear quality is provided.
采用齿廓统计分析方法对加工工艺系统进行识别,可为齿轮质量的评定与控制提供更科学且易于操作的手段。
And attempt to regard this as the break though point, find a simple and feasible method for gear transmission optimization design.
并试图以此为突破点,为齿轮传动优化设计找到一个简便可行的方法。
In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.
分析齿轮主要参数,提出用测量跨棒()和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法,并推导出螺旋角的计算公式。
The load assignment formula and the method of the double circular arc gear under the wiring error influence between the contact mark was introduced and inferred.
介绍并推导双圆弧齿轮在安装误差影响下接触迹间载荷分配的计算公式和方法。
Substantial construction, working principle and practical maintenance method of revolving valve type power steering gear is presented in detail.
详细地介绍了转问式动力转向器的具体结构、工作原理和具体维护方法。
The combined benefits make this a more efficient method than the old one-by-one gear changing method.
各种各样的好处使得这种驾驶方法,比一个接一个换挡的老式方法,更加有效。
During the gear fault detection and diagnosis, the fault feature extraction is the key of diagnosis, but it is multifarious for the method of fault feature extraction.
在齿轮故障监测与诊断中,故障特征提取是诊断的关键,而特征提取的方法也是多种多样的。
This paper illustrates the processing art method of the hard gear wheel with big modulus in accordance with the mill wheel machine equipment in our factory and analyzed the big modulus gear wheel.
针对我厂现有磨齿机的设备和对特大模数齿轮参数分析制定出特大模数硬齿轮加工工艺方法。
A method of calculating and selecting modification coefficient of the internal gear with less teeth difference is presented.
介绍了一种适用于少齿差内啮合行星齿轮变位系数的计算及选取方法。
If Gear type method is employed to atmospheric chemical model, chemical kinetic model and sensitivity analysis, the prediction matrix is an unsymmetric matrix.
若用吉尔型法求解大气化学模式、动力学模式和灵敏度分析时,预估矩阵是不对称矩阵。
The influence of virtual reality technology on mechanical product development is analyzed and a method to design virtual model of gear-box based on VRML is presented.
分析了当今虚拟现实技术对开发机械产品的影响,提出了利用VRML构建齿轮变速箱虚拟模型的基本方法。
As a special kind of drive machine, gear has the special method of designing and manufacturing.
齿轮作为一种通用的传动机构,具有其特殊的设计和加工方法。
The measurement system and measurement method of gear parameters based on CCD were introduced, and then influence factors of measurement precision were analysed.
介绍了基于CCD齿轮参数测量系统的组成及其测量方法,并对影响测量精度的因素进行了分析。
The method of the optimization design for gear wheel spoke which is based on CAD model is investigated.
对一种基于二维CAD模型的齿轮辐板优化设计方法进行了研究。
A new internal gear form grinding method was introduced.
介绍了一种新型内齿轮成型磨削方法。
The optimum design method of involute internal gear slotting cutter is introduced.
介绍了渐开线直齿内齿轮插齿刀的优化设计方法。
A landing gear drop test method is presented in this paper, in which the lift is simulated by an air actuator and accumulator system with constant pressure.
结合某型号飞机试验任务,阐述有关空气作动筒仿升的起落架落震试验方法。
The gear transmission system dynamics model was analyzed according to the gear transmission principles and a dynamics method based on gear contact calculation was given.
从齿轮传动的基本原理出发,系统地分析了多轴齿轮传动系统的动力学模型原理,提出了基于齿轮副接触算法的动力学仿真模型。
This paper provides a method for calculating the influence of parametric deviation of crank gear on balancing quality of internal combustion engines.
本文提出一种计算曲柄连杆机构参数偏差对内燃机平衡性能影响的方法。
According to the feature of epicycloid hypoid gear, a new method is proposed to calculate the geometric parameters of pitch cone accurately.
根据延伸外摆线准双曲面齿轮的特点,提出一种精确计算其分度锥面几何参数的新方法。
Surface temperature on gear teeth was measured by dynamic thermocouple method. A test gear construction consisting of three pieces and electric resistance was designed.
用动态热电偶法测量齿面闪温分布,设计制造可测出全齿面闪温的三片组合带电阻式齿轮结构。
While optimizing two and more grade gear assembly, this method is more direct and clear, and the process is more simple and rapid.
将该方法用于二级或多级齿轮减速器的优化设计,其优化过程更为直观、清晰,编程更为简单、快捷。
While optimizing two and more grade gear assembly, this method is more direct and clear, and the process is more simple and rapid.
将该方法用于二级或多级齿轮减速器的优化设计,其优化过程更为直观、清晰,编程更为简单、快捷。
应用推荐