If the poor thermal stability of coal, coal charging hind can because of be heated and produce split, broken, so they will improve furnace resistance and increase the number of bring out content.
如果煤的热稳定性较差，煤炭入炉后就会因受热而产生崩裂、破碎，这样一来就会提高炉内阻力和增加带出物的数量。
I plant research, development, production of professional resistance furnace manufacturers.
我厂是研究、开发、生产电阻炉的专业厂家。
This article introduces a cantilever rotary drum resistance furnace, including its structure, effectiveness and prospects in application.
本文介绍了悬臂滚筒式电阻炉的结构特点，使用效果，以及应用前景。
Bogie hearth resistance furnace bearing and susceptible to collision parts with high strength refractory brick masonry, and the use of water glass during building the mud, so the strength increase.
台车式电阻炉的炉膛的承重和易受冲撞部位用高强度耐火砖砌筑，并且在砌筑过程中使用掺水玻璃的的泥浆，所以炉膛强度大幅提高。
The shell of the trolley type resistance furnace is cylindrical, and the inside is a vertical shaft furnace made of refractory bricks.
台车式电阻炉的外壳呈圆筒状，内部是由耐火砖砌成的竖井式炉膛，所以台车式电阻炉因此而得名。
In the process of resistance furnace heat transfer, the effect is often not ideal, so how to improve the heat transfer effect is a problem to be discussed.
在电阻炉的换热过程中效果往往会不甚理想，所以怎样提升电阻炉换热效果是一个需要探讨的问题。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
研究方法和主要成果如下：使用电阻炉熔炼a356铝合金，并采用斜坡冷却法进行半固态熔体的制备。
This paper analyzes the mathematical model of a resistance heating furnace, showing that a normal controller is unable to reach a high control accuracy.
本文分析了电阻加热炉的数学模型，说明了常规控制器不能达到高控制精度的原因。
The hardware composition, high precision conversion of temperature signal and the trigger control circuit for resistance furnace are introduced.
介绍了电阻炉温度控制系统的硬件组成、温度信号的高精度转换及触发控制电路。
The formula for the resistance of graphitization furnace in later stage is calculated by comparing the ideal model and actual result.
通过对一理想模型的推算，比较模型与实际的结果，推算石墨化炉通电后期电阻公式。
A fuzzy controller with integral parameter is designed, and applies it to the temperature control system of resistance furnace.
设计了一种带有积分参数的模糊控制器，并将其应用于电阻炉的温度控制系统。
Activated carbon for electric double layer capacitors was prepared from coal by activation with KOH through heating by microwave radiation and resistance furnace heating.
以煤为原料，KOH为活化剂，采用微波辐射加热法和电阻炉加热法制备出双电层电容器用活性炭。
Electroslag furnace is made of slag change electric resistance furnace (esr).
电渣炉是由溶渣实现电热转变的电阻炉(见电渣重熔)。
The resistance furnace can be heated to very high temperatures, the supplies graphitizing furnace carbon materials, for example, can put the material heated to a temperature of more than 2500.
这种电阻炉可以把物料加热到很高的温度，例如碳素材料石墨化电炉，能把物料加热到超过2500。
This article is tried to design and calculate the complex heat screen of vacuum resistance furnace by the analysis method as a substitution for the conventional spline fit method.
本文试图建立一种分析法代替传统采用的试凑法，对真空电阻炉的复合热屏蔽进行设计、计算。
Temperature computer control system of a resistance furnace is designed with industry person computer (IPC), temperature input module, PWM output card, solid state relay(SSR) and interrelated circuit.
设计和实现了一种采用工控机与温度模块、PWM输出卡、固态继电器及相关控制电路搭建的计算机电阻炉温度控制系统。
Sample A whose surface has layer structure via oxidize-deoxidize treatment and sample B which is decarbonization are put into resistance furnace for carbonization and quencher under hydrogen.
将其中试样A通过氧化-还原处理，表面具有层状结构，与另一脱碳试样B一起放入改造后的电阻炉内在通氢气的气氛中进行渗碳淬火。
As an example, a soft-ware for continuous resistance furnace designing is worked out, its functions and method of application are introduced in detail.
还以连续式电阻炉为例编制了设计软件，详细介绍了该软件的功能和使用方法。
Features, calculation of heat balance, main technological parameters of choice about huge resistance furnace for hot galvanized tube are described in this paper.
介绍了镀锌钢管用大型电阻炉的特点，热平衡计算，及锌锅壁厚、主要技术参数的选择。
This paper introduces the principle of model-dependent control which is applied to temperature control of resistance furnace reactor for the first time.
本文介绍了倚模控制的基本原理，并首次将其用于电阻炉反应器的温度控制中。
The moisture absorption ability of different bamboo charcoals burn from the box type resistance furnace and the traditional kiln were tested under different temperature and humidity condition.
选用箱式电阻炉和土窑烧制的竹炭，在不同温度和湿度条件下进行竹炭吸湿性变化的试验。
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
利用电阻炉加热，采用电子显微镜及图象分析仪，研究了近液相线铸造a 356铝合金在二次加热过程中的组织变化。
The boasted batch agglomerations with resistance furnace are analyzed with chemical methods.
在电阻炉中焙烧烧结小饼，采用化学方法对烧结饼进行分析。
This article introduces the structure and designing calculation of RT-1400 big bogie hearth resistance furnace.
本文介绍了大型台车式电阻炉rt- 1400的结构及设计计算。
This article analyzes the reason for resistance rise in the first stage purification furnace. It puts forward some control methods and measures.
对一段炉阻力增大的原因进行分析，提出预防和处理阻力增大的控制方法和措施。
Three kinds of high temperature resistance furnaces with different heating method are designed, that is, outside-wall heating, inside-wall heating and double heating high temperature furnace.
设计了三种不同加热方式的高温电阻炉，即外壁加热、内芯加热和双重加热高温炉。
The resistance furnace temperature is a time delay system, an internal model PID robust controller is presented in this paper.
针对电阻炉温度被控对象的纯滞后特性，设计了内模pID鲁棒控制器。
The application of metal as heater in vacuum resistance furnace were described.
描述了在真空电阻炉中金属加热体的应用，讨论其性能和结构特点。
This series of resistance furnace shape is rectangular, the furnace shell with Angle steel, cold-rolled plate made of the welding, surface electrostatic spraying.
本系列电阻炉外形均为长方形，炉壳系采用角钢、冷轧板焊接制成，表面静电喷涂。
The characteristic of delay, nonlinearity and difficulty to acquire the precise mathematical model existing in the temperature control of the heat treatment resistance furnace system was studied.
热处理电阻炉温度控制具有大的滞后性、非线性、难以获得准确数学模型的特点。
应用推荐