The effect of isothermal forging temperature on microstructure and mechanical properties of2B70 aluminum alloy was studied.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
Adopting forging method and proper heat treatment after forging can improve significantly the impact toughness of chromium alloy white cast iron.
利用锻造方法并结合锻后适当的热处理工艺可大幅度提高铬合金白口铸铁的冲击韧性。
The effect of forging on hardness and conductivity of alloy is unconspicuous.
锻造处理对合金硬度和导电率的影响不明显。
Thermal deformation processing: heat pressing, forging and rolling for metal and alloy.
热形变加工：金属及其合金的热压、锻造、轧制等形变加工。
The effect of aging temperature and aging time to new-type heat-resisting aluminum alloy forging structure and properties are introduced.
通过对新型铝合金时效处理后的组织结构进行分析，研究了不同的时效温度和时间对该铝合金力学性能的影响。
The result showed that ADI has better wear resistance than low alloy cast iron and forging steel.
结果表明，其耐磨性明显优于低合金球铁和锻钢。
Usually, excellent Superplasticity of Zn-Al eutectoid alloy could be obtained by pre-deformation (rolling or forging).
锌铝共析合金具有良好的超塑性，但通常需要经过预变形(轧制或锻压)来得到。
This article has described the manufacturing process of the heavy duty GH36 alloy turbine plate forging.
介绍了GH36合金大型涡轮盘锻件的生产工艺。
The domestic alloy FGH95 made from argon atomized powder, then consolidated by HIP with or without forging, also contains various kinds of inclusions affecting the stability of mechanical properties.
国产氩气雾化粉末经热等静压或再经锻造的FGH95合金也出现多种夹杂，影响力学性能稳定。
The gross section fine grain material can be obtained by radial forging. One heat forging from ingot to finished products of high alloy with hard deformation can be realized.
径向锻造可获得全截面细晶材料，并实现高合金难变形材料由锭到材的一火次锻造。
We grow accompanying the growth of economy and industries in Taiwan, involved in forging of copper alloy and aluminum alloy coping with the demand of Taiwan industries.
本公司伴随台湾经济及工业的成长，配合台湾工业界之需求亦投入铜合金与铝合金之锻造。
In the paper technical requirements, processing method and gained benefits of precision die forging of Ti-Alloy blades are briefly described.
本文概略介绍了钛合金叶片精锻技术要求、研制内容和取得的技术经济效益。
The results show that ZHMR4 has good processing properties and the parameters of forging are advisable. This alloy can be commercially produced.
结果表明：ZHMR 4合金具有良好的加工性能，且锻造选用的工艺参数较为合理，此合金可以进行工业化生产。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
The effect of isothermal forging temperature on microstructure and mechanical properties of 2b70 aluminum alloy was studied.
研究了不同等温锻造温度对2b70铝合金显微组织与力学性能的影响。
The Titanium alloy swashplate's pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求，并进行工艺试制和应用。
So it is usually processed by isothermal forging, which provide selected temperature steadily to improve the plasticity of magnesium alloy.
等温锻造成形过程中温度基本不变，可消除镁合金在常温下成形性能差的问题。
ZA27 alloy is formed in a mold by semi-solid forging.
对ZA27合金进行半固态模锻成形。
This paper reports that the strength and Plasticity of aluminium alloy forging is adjusted by changing system of heat treatment.
报导了通过改变热处理制度调整铝合金锻件强度与塑性指标。
Based on experiment, using multifactor orthogonal test, the chemical composition of Al-alloy for liquid state forging was optimized.
基于实验基础，运用多因素正交试验，优化了一种适合液态模锻用铝合金的化学成分。
The influence of two abnormal forging processes on the microstructures and tensile properties of TC4 alloy is investigated.
研究了两类锻造工艺对航天用TC 4钛合金异形锻件的显微组织及拉伸性能的影响。
The effect of different heat treatment process parameters on mechanical properties of LD10 alloy after forging was investigated.
研究了不同热处理工艺参数对LD 10合金锻造后力学性能的影响。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
The hammer forging process of TC6 titanium alloy clasp has been simulated by using rigid-viscoplastic FEM.
在TC6钛合金卡环的高温锤锻过程中，模具承受非常大的应力。
Thus the efficient measure of preventing from oxidization was introduced to improve the superplastic deformation and quality of isothermal forging for titanium alloy.
通过采取相应措施防止氧化，以提高钛合金超塑性变形的性能，确保钛合金等温锻造质量。
It is found that the alloy has a better mobility in forging process. Lack of filling occurred in the head and the edges. The main flaw is also easy to produce in these parts.
研究发现，锻压过程中合金的流动性整体较好，在锻件头部和杆部边缘处充填性稍差，主要的缺陷也易在这些部位产生。
The isothermic forging properties of LD5 alloy for making high web and thin wall forgings are studied.
研究了LD 5铝合金等温锻造成形高筋薄壁锻件的工艺特性。
The isothermic forging properties of LD5 alloy for making high web and thin wall forgings are studied.
研究了LD 5铝合金等温锻造成形高筋薄壁锻件的工艺特性。
应用推荐