In this paper, a dynamic model of the gas-solid two phase flow in magnetically fluidized bed is established first.
本文首先从理论上建立了磁流化床气固两相流动的动力学模型。
The densification of the solid volume concentration in fluidized bed reactor and the kinetic action of forced stirring and upward water flow to the cluster granulation in fluidized bed are discussed.
本文分析讨论了流化床固体体积浓度的致密作用特点,以及流化床中强制搅拌和上升水流对结团造粒过程的动力作用。
Fluidized—bed furnace is a new type device for heat treatment, which utilises fluidization technology for moving solid particles in a state of suspension by the action of gases.
流态床炉是一种新型的热处理设备,是利用气固流态化技术制成的。
Fluidized bed drier enjoys advantages of even solid particle mixing and large heat and mass transfer area of gas and solid phase.
流化床操作具有固体颗粒混合好,气固两相传热传质表面积大等优点。
The onset velocity was an important parameter that affected the normal operation of the gas liquid solid outer circulating fluidized bed.
本文利用流化床内压降随表观液速的变化阈值来确定流化床的起始外循环流化速度。
In this paper, the vapor-liquid-solid three-phase circulating fluidized bed evaporator was applied to concentrate rhubarb liquid extract of Chinese traditional medicine considering its advantage.
本文针对汽-液-固三相循环流化床蒸发器的特点,把该种蒸发设备应用于中药大黄浸提液的蒸发浓缩。
DEM (Discrete Element Method) is used to simulate the gas-solid flow of a two-dimension fluidized bed with L-type wind caps in this paper.
该文采用离散元素法DEM模型对二维L型定向风帽流化床中的气-固流动特性进行模拟。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
在一个加压喷动流化床装置上进行了冷态实验,研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
A practical type of combined distributor used for solid-liquid circulating fluidized bed heat exchanger is introduced.
介绍了一种用于液固循环流化床换热器中的组合式固液分布器。
Theoretical analysis and experimental research on bipolar charging phenomena and electrostatic potential distribution in gas-solid fluidized beds were carried out.
对颗粒的双极带电现象和气固流化床中的静电分布进行了理论分析和实验研究。
A vapor - liquid - solid three - phase circulating fluidized bed, which is a new type of evaporation boiling means, has been studied.
提出了一种新型蒸发沸腾传热方式,即汽液固三相循环流化床沸腾传热。
A new hybrid method for prediction of solids holdup in gas-solid circulating fluidized bed is proposed based on chaos phase reconstruction and wavelet package as well as neural networks.
提出了一种将混沌的相空间重构、小波包分析和神经网络相结合的新方法用于预测气-固循环流化床的颗粒浓度。
In this paper, the two -phase flow behaviors of gas-solid circulating fluidized bed have been first studied by analysing experimental data.
本文首先从实验数据分析的角度揭示了气-固循环流化床的两相流动规律。
Flow behavior of liquid and solid phases was simulated in an inversed fluidized bed based on two-fluid two-phase flow model.
基于欧拉·欧拉双流体模型,数值模拟倒置液固流化床内液固两相流动行为。
By independently designing and making the separation equipment of the Liquid-solid fluidized bed, an open experimental system has been established.
通过自行设计和制作液固流化床分选设备,建立了初步的试验研究系统。
A detailed numerical study was conducted of the gas-solid inertial separation process in a circulating fluidized bed.
对循环流化床中气固惯性分离过程进行了详细的数值研究。
The fouling prevention and on line cleaning of desiliconization preheating exchanger with the fluidized inert solid particles is investigated.
用流化床传热技术,研究惰性固体颗粒清除和防止铝土矿熟料溶出液脱硅过程中的硅渣结垢。
It is shown that the pressure balance is in close relation with the fluidized bed operation status and solid circulation rate.
结果表明,颗粒单循环回路的压力平衡与装置的运行状态、颗粒的循环量密切相关。
The influence of the arrangements of pipes on gas solid flow characteristics in the dense section of standpipe in the circulating fluidized bed is studied on a cold state experiment platform.
在冷态试验台上研究了循环流化床料腿密相段中不同管束布置方式对气固流动特性的影响。
Activated carbon (AC), carbon black (CB) and carbon nanotube (CNT) was employed to catalyze methane decomposition to produce COx-free hydrogen and solid carbon in a fluidized-bed reactor.
本文在流化床中对活性炭、炭黑和碳纳米管等固体碳在甲烷裂解反应中的催化活性进行了研究。
A new flow pattern in gas-solid fluidized beds is developed by using lateral tangent gas jets and a Spiral distributor.
用侧面切圆射流和旋流布风板造成了鼓泡流化床内气固流动的新流型。
Theoretical analysis and experimental works have been carried out to study the solid particle attrition phenomena in a spouted-fluidized bed with a draft tube.
本文对导向喷动流化床中固体颗粒的破损进行了理论分析和实验测试。
Liquid-solid exterior circulating fluidized bed heat exchanger can be used to evaporate and concentrate the extract of single-base powder when withdrawing nitrocellulose from it.
液固外循环流化床换热器可以用来蒸发浓缩单基药提取硝化棉的提取液。
The oil is injected into the bed of fluidized coalite and cracks on contact with hot solid.
该油注于流化焦粉床层中,与热固体接触而裂解。
A reasonable, reliable, recycle fluidized structure was proposed based on the structure of liquid solid fluidized heat exchangers, and two successful application examples were given.
在液固流态化换热器的结构基础上,提出了一种较合理的能可靠地循环流化的结构,并给出了两个成功的工业应用实例。
The fluidized-bed heat exchanger within which the solid particles are kept in a fluidized condition by the fluid medium, so as to achieve a good heat transfer has a broad prospect for its application.
在流化床换热器中,固体颗粒在流化介质作用下保持流化状态,因此有着良好的传热性能,应用前景广阔。
An artificial neural network model was set up to simulate the hydrodynamics of the gas-solid flow in the gas-solid circulating fluidized bed.
提出了气固循环流化床中气固流动的人工神经网络模型。
A model for the rise velocity of a single deformed bubble in liquid solid fluidized beds was formulated, based on the analysis of the forces acting on a bubble.
以气泡在上升运动过程中的受力分析为基础,建立了描述单个变形气泡在液-固流化床中上升速度的理论模型。
A model for the rise velocity of a single deformed bubble in liquid solid fluidized beds was formulated, based on the analysis of the forces acting on a bubble.
以气泡在上升运动过程中的受力分析为基础,建立了描述单个变形气泡在液-固流化床中上升速度的理论模型。
应用推荐