According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
This method takes advantage of the dynamic simulation function of finite element analysis and the thermodynamic theory to calculate the value of thermal flux.
该方法利用动力学分析功能，结合传热学原理求解热流传递数值；
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
Introducing heat exchange theory and finite element theory, and deducing the theory that applies finite element method to thermal analysis and thermal stress analysis.
介绍了传热学基本理论知识，有限元方法思想。对有限元法在热分析和热应力分析中的具体应用进行了理论推导。
The research about finite element analysis for two-dimensional thermal structures with uncertain parameters has extensive engineering-background, important theory meaning and academic value.
不确定性参数的二维热结构有限元分析研究有着广泛的工程背景和重要的理论意义与学术价值。
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
采用有限元分析软件ANSYS，对某大型固定管板式换热器管板的稳态温度场和热应力场进行了三维有限元分析。
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
A software for simulating and calculating the temperature field in rolling tire has been developed by using the analytical function of nonlinear finite element based on the thermal stability analysis.
在轮胎热学稳态分析的基础上，利用有限元非线性分析功能，开发滚动轮胎温度场有限元模拟计算软件。
To study the reason of appearance of the thermal diffuse crack, Temperature and thermal stress analysis of the steam pipe and correlative branch pipe was performed with finite element analysis method.
本论文进行模拟实验并有限元方法，获得蒸汽管道支管及接管座管壁温度场和热应力的分布规律，阐明热疲劳裂纹产生的原因；
In this paper, numerical analysis is carried out by the finite element method for the transient temperature fields and thermal stresses of high-speed locomotive braking discs.
本文采用有限元方法对高速轮轨列车制动盘的瞬态温度场和热应力进行了分析研究。
The influence of the channel parameters of the water-cooled Si mirror on temperature and thermal deformation was simulated using ANSYS finite element analysis.
采用ANSYS有限元软件详细地研究了强激光作用下水冷硅镜的沟槽结构对镜面温升和变形峰谷值的影响。
Using the ANSYS finite element analysis software, thermal analysis and thermal stress analysis of side dam in the strip casting process are carried out to explain the cause of side dam cracking.
采用ANSYS有限元分析软件，分析了侧封板在铸轧过程中温度场和热应力场，由此解释侧封板产生裂纹的原因。
Thermal stability of the batteries is examined using Finite Element Analysis (FEA) for different environmental conditions, driving patterns, and control strategies.
使用有限元素分析(FEA)在不同的条件状况，驾驶模式和控制策略下来检验电池的耐热性。
This paper presents the results of finite element analysis of temperatures and thermal stresses for the Rolls during quenching.
给出了轧辊淬火过程中的温度场及热应力场的有限元计算。
The thermal analysis, thermal-structure coupling analysis and transient thermal analysis are applied in nine common materials by using the finite element software ANSYS.
应用有限元软件ANSYS对常用九种材料进行了热稳定性和抗振性分析。
This paper presents a finite element analysis of the thermal generation and temperature distribution of a vehicle's transmission gearbox.
对某车辆传动变速箱的温度分布，采用有限元方法进行了分析。
The finite element analysis shows that the maximum thermal stress is in the outside corners of the glass solder. The thermal stress in the edges of glass solder is also high.
通过有限元法对键合热应力进行分析，得到热应力最大值位于玻璃焊料与硅片接触面的外拐角处，其次是玻璃焊料内外边缘处；
Finite element analysis (FEA) is broadly used in engineering, it was initially applied to simulate and solve a variety of engineering mechanics, thermal, electromagnetics, and other physical problems.
有限元分析法(FEA)是一种在工程学中广泛应用的方法，最初应用于模拟并且解决各种工程力学、热学、电磁学等物理问题。
An approach to the thermal radiation of absorbing-emitting media, or weak absorbing media, e. g. burned gas, in the finite element analysis (FEA) of heat transfer is studied in this paper.
研究了有限元传热分析中有吸收—发射性介质(或称弱吸收性介质，例如燃气)参与辐射传热时的处理方法。
This method can be used to generate the thermal loads for finite element analysis.
该方法可作为使用有限元法分析桥梁温度应力的边界条件。
In this paper, the method of 2-D finite element analysis was conducted to simulate the thermal state of the roadbed with insulations on permafrost.
本文运用有限元分析方法，对多年冻土区含保温夹层的路基温度场进行了数值模拟。
Based on the advanced computer visualization technique the pre and post-processing of finite element analysis of turbine rotor thermal-stress are conducted.
结合汽轮机转子热应力有限元分析问题，提出了适用于汽轮机转子有限元热应力分析的前后处理可视化的实现方法。
Based on the advanced computer visualization technique the pre and post-processing of finite element analysis of turbine rotor thermal-stress are conducted.
结合汽轮机转子热应力有限元分析问题，提出了适用于汽轮机转子有限元热应力分析的前后处理可视化的实现方法。
应用推荐