This paper briefly introduces photothermal techniques and their applications in optical thin film coating measurements and ti: sapphire laser crystal characterisation.
简要介绍了光热技术及其在光学薄膜测量和钛蓝宝石激光晶体表征中的应用。
It will be widely applied to HDAB and SDAB, Laser Disk machine, moving multimedia communication, video conference and video monitor, wide band net stream media, digital film, etc.
它将广泛应用于高清晰度和标准清晰度的数字电视广播、激光视盘机、移动多媒体通信、视频会议与视频监控、宽带网络流媒体、数字电影等产业。
It is very applicable to die cut free paper adhesive tape, Dacron film trademark and laser anti-false trademark.
它是非常适用于模切无纸胶带，涤纶薄膜商标及镭射防伪商标。
Laser resisting holographic protective film has been developed.
研制成功了全息激光防护薄膜。
From the microscopic view point of energy transfer, energy transfer mechanism of femtosecond pulse laser radiation on metal film and the resulted molecules desorption from substrate is discussed.
从微观能量传输角度，对飞秒脉冲激光的辐射传热及其产生的金属薄膜吸附层分子脱附过程的能量输运机理进行了研究。
As a result, lower working pressure and higher RF power is helpful to prepare good a-C film, meanwhile, laser repetition has evident influence on films growth.
结果表明：在较低气压和较高的射频功率下制备的a - C膜质量较好，同时，激光重复频率对膜生长也有显著影响。
Laser film and break the ice dragon.
激光电影与冰龙破。
The principle and method of measuring the acoustic speed CVD diamond film with piezoelectric film detecting laser ultrasonic system are presented.
本文介绍了压电薄膜检测的激光超声系统对CVD金刚石膜声速测量的原理及方法。
The film interference experiment and the Brownian motion experiment are improved by using toy laser, and the experimental phenomena are more obviously.
利用玩具激光器对薄膜干涉和布朗运动实验进行改进，使实验现象更加明显、直观。
The common fabrication technologies of binary optical elements were expatiated, including etching, thin-film deposition, direct writing, excimer laser projection and gray-scale masks.
综述了二元光学元件的常用制作工艺技术，包括台阶刻蚀法、薄膜沉积法、直接写入法、准分子激光加工法和灰阶掩模法。
The graphite-like film was prepared on silicon substrate by pulsed laser ablation, and the field electron emission from the film was measured.
利用脉冲激光烧蚀技术在硅衬底上制备了类石墨薄膜，以该薄膜为阴极进行了场致电子发射实验。
Some basic law and characteristics of laser sputtering and film growth process, revealed by a lot of experiment studies are described in detail.
重点阐述了近年来由大量实验研究所揭示出的激光溅射及成膜过程的一些基本特点和规律。
The results show that the study on lens effect in fine flame stratified film structure is benefit for obtaining very accurate laser hologram information.
结果表明：精细的火焰多层膜层结构的透镜效应研究对获得极准确的激光全息信息非常有益。
In argon (ar) gas, nanocrystalline silicon films are prepared by pulsed laser ablation. The influence of ambient pressure on surface morphology of nanocrystalline silicon film is studied.
采用脉冲激光烧蚀技术在氩气环境下制备了纳米硅薄膜，研究了环境气体压强对纳米硅薄膜表面形貌的影响。
Newton's half ring is rayed by laser to demonstrate the equivalent thickness interference phenomenon of film step and measure film thickness.
用激光照射牛顿半环来演示薄膜台阶的等厚干涉现象和测定薄膜厚度。
The factors that affect the damage threshold and the advantage of RMS in laser reflective film preparation are also discussed.
阐述了影响激光反射膜损伤阈值的因素以及反应磁控溅射制备高阈值激光反射膜的优势。
The paper introduces the manufacture, debugging and application of laser puncher for thermal controlling thin film material plating aluminum used on spacecraft.
文章介绍了航天器用热控镀铝薄膜材料的激光打孔设备研制，设备调试及应用，并介绍了镀铝薄膜材料打孔后的存放方法。
The material choosing and coating designing are discussed in this paper. At the same time, several methods for laser reflective film preparation are compared.
分析了高阈值激光反射膜膜层材料的选择及膜系设计，比较了目前制备高阈值激光反射膜的几种常用方法。
They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.
这些应用大致涵盖激光掺杂、激光退火、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。
The scanning images of electron microscopy show that high annealing temperature or high laser energy can induce the nanocrystalline Si film with mazes.
扫描电子显微镜的结果表明，高的退火温度或高的激光能量均会导致迷津结构的形成。
In this paper, the testing on protective effect of laser resisting holographic protective film against powerful laser irradiation has been reported.
本文报道了全息激光防护薄膜对强功率激光的防护效果试验。
Medical laser film printer is an important part of medical image equipments, and has key function in diagnoses.
医用激光胶片打印机是现代医学影像设备的重要部分，对医学诊断起着关键作用。
Thus, it is very significant to research the damage mechanism of optical film and improve laser induced damage threshold (LIDT).
因此研究光学薄膜的激光破坏机制，如何提高激光损伤阈值，具有重要的实际意义。
Thick film conductor was prepared on ceramic substrate by laser micro-cladding.
采用激光微细熔覆直写布线的方法在陶瓷基板上制备高密度厚膜导体。
The main defects of laser spot welding of aluminum are crater, hot crack and porosity which created by oxide film and keyhole instability,.
焊点中存在的主要缺陷是气孔，表面下塌，热裂纹，其中气孔主要为氧化膜气孔和匙孔不稳定形成的气孔。
Based on the fixed errors of laser film printer, the paper gives one easy and simple calibrations arithmetic and sets up a way to achieve it by software and hardware circuit.
因为每台激光胶片打印设备未校准前的输出误差固定，故首先提出了一种简捷的激光成像校准算法，然后进行了软件和硬件电路的设计。
The emphases are laser ablation principle and status quoin fabrication of nano-particle, nano-fibre, nano-thin film.
其中重点介绍了激光消融法制备纳米颗粒、纳米纤维、纳米薄膜的原理和现状。
This paper presents an apparatus which can measure the relative displacement of the laser speckles on a processed double exposure film.
在激光散斑计量技术中，散斑条纹间隔的计量是重要的一环。
YAG laser cutting machine of CVD diamond film is used for finishing CVD dia mond film produced by the institute.
YAG金刚石激光铲平切割机是针对宁夏机械研究院生产的CVD金刚石膜进行后加工的设备。
YAG laser cutting machine of CVD diamond film is used for finishing CVD dia mond film produced by the institute.
YAG金刚石激光铲平切割机是针对宁夏机械研究院生产的CVD金刚石膜进行后加工的设备。
应用推荐