In this paper, Finite Element Method (FEM) is applied to the dynamical analysis on a three-axis turntable and a resonance model is built for bandwidth design purpose.
本文用有限元方法对三轴转台控制对象进行动力学分析，建立机械谐振的频域模型，为带宽设计提供了依据。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Firstly, an FEM (Finite Element Method) numerical model of single magnetic unit is set up, then magnetic field distributions under different working conditions are solved by ANSYS software.
本文首先运用有限元方法对机器人爬行小车的履带磁吸附单元建立了数学模型，并通过ANSYS软件进行了磁场求解，得出不同运动情况下的磁场分布；
In this paper, the Finite Element Method (FEM) is applied to create the FEM mechanic model of twist drill. The torsion stiffness, bending stiffness and press stiffness is computational simulated.
利用有限元分析方法，建立了麻花钻有限元力学模型，对钻头的扭转刚度、弯曲刚度和受压刚度进行了分析计算。
All along, the Bucket, circular stacker-reclaimer FEM analysis, are used to design the program first, then design the finite element calculation device model based on the program.
一直以来，对于斗轮机、圆形堆取料机等大型钢结构的有限元分析，都采用先有设计方案，再在已有设计方案的基础上，建立设备的有限元计算模型进行分析计算。
Methods Spiral ct scanning, image processing and CAD technology and FEM software were employed in the study to construct the three-dimensional finite element model of maxilla with a palatal implant.
方法采用螺旋ct断层扫描、计算机图像处理、计算机辅助设计和有限元软件处理，建立含腭部种植体的上颌骨三维有限元模型。
At first this paper utilized the FEM software ANSYS to build the finite element model of the prototype bus body and carry on static calculation to examine the intensity of the bus body.
本文首先利用有限元分析软件ANSYS，建立原型车车身的有限元模型，进行静态计算检验车身强度。
In this paper, finite element method (FEM) of axisymmetric linear elastic model has been used to calculate the tilt and strain induced by small annual temperature variations in a deep tunnel.
利用轴对称线弹性模型有限元方法，计算了洞室中温度微小年变化引起的地倾斜和地应变。
Therefore, it needs to establish the buckle to hang the system the non-linear finite element analysis model of cable-stayed system in the FEM of structure.
在进行有限元结构分析时，需要建立扣挂系统的非线性有限元分析模型。
The parametric finite element model (FEM) of wedged-ring joint structure was established using ANSYS parametric design language (APDL).
利用APDL语言对ANSYS软件进行二次开发，建立楔环连接结构的参数化有限元模型。
Based on FEM, an axis symmetric finite element electro-thermo-mechanical model in the formation of molten core of resistance spot welding is introduced.
介绍了基于有限元法模拟电阻点焊熔核形成过程中的轴对称电、热、力耦合场的模拟模型。
This paper presents a finite element method (FEM) model for the analysis of concrete filled steel tubes (CFT) based on ABAQUS.
本文以abaqus为平台，建立一套分析钢管混凝土的有限元模型。
Established two typical supporting system by SAP2000 FEM software, pipe truss, cable truss. Calculation and analysis of static finite element model of these two kinds of supporting system.
采用SAP2000有限元软件建立了管桁架、索桁架两种典型支承体系有限元模型，进行了静力计算分析。
A planar tube mathematical model of linear FEM (finite element method) and simplified model tube bundle on the scale of 1:4. 4 are used in the study.
采用了平面管的线性有限元数学模型和1：4.4缩比的简化管束模拟体。
The mechanics evaluation of bonding strength between coating and substrate was performed with finite element method (FEM), and an improved test model was proposed.
采用有限元法对涂层与基体界面结合强度进行了力学模拟，并对试验模型提出了改进。
In this paper, the vibration model analysis is briefly introduced and the importance of finite element model (FEM) in the whole monitoring of structures is stressed.
简要论述了振动模态分析方法，并指出有限元分析模型在结构整体监测中的重要性。
By using the finite element method (FEM) software, the vibration of 3-d finite element model of maxillary central incisor tooth was analyzed.
在三维有限元模型的基础上，利用有限元分析软件对上颌中切牙的振动模态进行了分析。
The finite element model of the machine was setup by using FEM software ANSYS, and modal analysis was carried out.
采用有限元分析软件ANSYS建立TGK46100的有限元模型，并进行整机模态分析。
Firstly, the finite element model (FEM) of the generator is established to obtain sample data set indicating performance parameters of the generator;
首先建立振动发电机的有限元模型，以获得表征电机性能参数的样本数据集；
Dynamic model of the cable-cabin system is derived by finite element method (FEM). This is a basis of analyzing the dynamic performance of the cable-cabin system.
建立了舱索系统结构的非线性有限元模型，为结构的动态性能分析奠定基础。
A finite element method (FEM) model is established to analyze the solidification heat transfer and shell growth of the old bloom caster in a steel works and is tested by the measured data.
采用有限元方法，对某钢厂的大方坯连铸机的凝固传热情况以及坯壳凝固生长进行了数值模拟，并通过现场数据对模型进行了验证。
As illustrated in FIG. 1, at step 102, a finite element model (FEM) representing the physical structure of a heart is generated.
如图1中所示，在步骤102中，产生表示心脏的物理结构的有限元模型(FEM)。
The finite element method (FEM) software ANSYS is employed to model device and simulate thermal distribution so as to obtain temperature improvement.
利用有限元软件ANSYS对器件进行建模和三维热模拟，研究器件温度分布的改善情况。
The finite element method (FEM) model was established to predict the temperature field, shell growth and solid fraction of the heavy rail bloom caster.
采用有限元方法，对某钢厂的重轨钢大方坯连铸机的凝固过程温度场分布情况、坯壳生长规律和凝固率进行了模拟研究。
The FEM(Finite Element Model) analysis was used in design of the target chamber in order to optimize the mechanical design of the vacuum cone and the final optical system.
通过有限元分析方法，建立有限元分析模型，进行优化设计。
The FEM(Finite Element Model) analysis was used in design of the target chamber in order to optimize the mechanical design of the vacuum cone and the final optical system.
通过有限元分析方法，建立有限元分析模型，进行优化设计。
应用推荐