This paper describes the characteristics, logic architecture, hardware facilities, software system of the SVP of the Siemens 7570-c computer and fault-diagnosing methods of the computer.
本文介绍了西门子7570-C计算机服务处理机的特点、逻辑结构、硬件配置、软件系统和故障诊断方法。
Introduced the methods of analyzing and diagnosing internal fault using chromatography analysis technology for larger scale oil-filled electric equipment.
介绍了应用色谱分析技术对大型充油电气设备内部故障进行分析与诊断的方法。
Fault diagnosing is the main function of network management system of transmission network, and also difficult function of NMS.
故障诊断是传送网网管系统的重要功能,也是网管建设中的难点问题。
The article analyses original methods of DGA fault diagnose, include three-ratio method, artificial neural network method, Fuzzy Theory, diagnosing expert system, grey relational algorithm, et.
本文分析了原有的DGA故障诊断方法,包括三比值法、人工神经网络法、模糊理论、变压器诊断专家系统、灰色关联算法等。
A new vibration monitoring, analyzing and fault diagnosing system, the structure of its data acquisition system, performance and characteristic of the software were introduced.
介绍一种新型振动监测分析和故障诊断系统,其数据采集器的结构以及系统软件的功能和特点。
Based on this, a fault diagnosing system of transmission network prototype is implemented.
在此基础上,实现了一个网络故障诊断的原型系统。
The dissertation introduces the design method of fault diagnosing program in details.
论文详细介绍了故障诊断程序的设计方法。
Experiment shows that its deducing process is entirely the same as the INS of a certain type of plane, and it has important reference value to fault diagnosing of homemade INS.
实验证明:其分析推导过程与某型飞机惯导产品实际情况完全一致,对国内惯导故障诊断具有重要的参考价值。
This method has already applied to a fault diagnosing KB of electric power communication networks, and has gained good effects.
该方法已在电力通信网智能故障诊断知识库中获得应用,取得了良好的效果。
This article's main purpose is to apply multimedia technology and digital signal processing methods to equipment fault inspecting and diagnosing system.
本文主要研究把多媒体技术和各种数字信号处理技术引入设备故障监测和诊断系统。
In this paper, typical fault mechanisms and vibration characters are analyzed; the methods of analyzing gear vibration signal and diagnosing fault are described.
分析了齿轮典型故障的故障机理及其振动特征,阐述了齿轮振动信号分析与故障诊断的方法。
The signal processing is the key point in fault diagnosing.
而信号处理是故障诊断成功与否的关键。
Adaptive weighted median filter is used for diagnosing the fault signal of the rolling element bearing.
将自适应加权中值滤波器应用于滚动轴承故障信号的故障诊断中。
By analyzing the fault models, some parameters that are sensitive to the fault models are selected to be the diagnosing parameters.
通过对故障进行分析,选取对故障比较敏感的气动或性能参数作为故障诊断参数。
The system is applied to a means of online fault diagnosing and a measure of real- time monitoring relay protection sensitivities.
该系统为运行人员提供了一种在线进行故障诊断的方法以及在线对保护灵敏度进行监测的手段。
This paper, taking the auto leveling system of modern asphalt paver as an example, describes the system monitoring and fault diagnosing function.
以沥青混合料摊铺机自动调平系统为例,介绍了系统状态监测与故障自诊断功能。
By diagnosing intermittent fault, BIT with the method is better than that of two-state method in reducing false alarm rate as well as increasing fault detection rate.
与传统两状态方法相比,基于三状态方法的BIT通过诊断间歇故障,不仅有效地抑制间歇故障引起的虚警,而且还能提高故障检测率。
And experimental verification shows that the system is suitable and effective in condition monitoring and fault diagnosing of rotating machine group.
实验结果表明,系统达到了机组群状态监测与故障诊断的要求。
The rotor is the main component during turbine fault forecasting and diagnosing.
汽轮机转子是汽轮机故障预测及诊断问题的一个重要方面。
And in the system, the combination of the traditional data analysis method and forward and backward whirl analysis method improves the veracity and reliability of fault diagnosing.
传统分析方法与进动分析方法的结合提高了故障诊断的准确性、可靠性。
Reconfigurable remote FDS can be implemented in four levers as system software developing, specific FDS designing, fault diagnosing and information managing.
可重构诊断系统的实现与运行分为四个层次:系统层、设计层、运行层与管理层。
To solve the problem, a synthetic experiment platform for nc teaching is built to illustrate nc principle visually and to simulate fault diagnosing of nc machine tools.
本文以此为出发点,构建了数控教学综合实验平台,以期实现数控原理的形象化展示与故障诊断的模拟维护。
By using the expert system technology in AI, the author has developed a fault diagnosing expert system for AP director which is proved effective.
作者运用人工智能中的专家系统技术研制成功AP指挥仪故障诊断专家系统,该系统经试用效果很好。
A fault detection system based on CAN technology and an expert fault diagnosing system are proposed in this paper.
本文开发了一种基于CAN总线技术的电梯故障监测系统和基于专家系统的故障诊断系统。
Signal collecting is the base of equipment fault diagnosing. The timeliness and the accuracy of signal collecting directly affect result fault diagnosing.
信号采集是机械设备故障诊断的基础,信号采集得是否及时、正确直接影响到诊断结果的正确性。
Aiming at the problem of testing parametric fault in analog integrated circuits, an approach based on power spectrum correlation analysis for diagnosing parametric faults is presented.
针对模拟集成电路参数型故障的测试难题,提出了定位模拟集成电路参数型故障的功率谱相关分析方法。
The reasoning operations proceed on two steps: (1) separating the fault in large scope into that in small scope, (2) then diagnosing the fault in small scope.
推理工作分两步进行:(1)将故障从大范围隔离到小范围;(2)小范围故障诊断。该系统已投入运行。
Rule-based fault diagnosis, and especially expert systems, are already widely used in diagnosing faults of complex systems.
在复杂系统故障诊断中,基于规则的故障诊断特别是专家系统已得到广泛应用。
The principle of housekeeping software design, multi-task design, data communication, double computer fault diagnosing and processing are described in detail.
并对软件设计原则、多任务设计、数据通信、双机容错和故障诊断与处理作了较详细的讨论。
The principle of housekeeping software design, multi-task design, data communication, double computer fault diagnosing and processing are described in detail.
并对软件设计原则、多任务设计、数据通信、双机容错和故障诊断与处理作了较详细的讨论。
应用推荐