Finally the shearing fatigue model of the surface strengthening spring is suggested.
最后给出了表面强化弹簧的剪切疲劳模型。
Application of fatigue model on the evaluation of instability of seafloor silt is discussed in this paper.
该文探讨疲劳模型在评价海底粉土不稳定性中的应用。
Objective: To study the effects of incremental load training on exercise capacity by establishing exercise fatigue model.
目的：通过建立运动性疲劳的人体实验模型，动态观察递增负荷运动对机体运动能力的影响。
The fatigue model parameters are determined based, on the low cycle fatigue test of the MSD and the achievements of past study.
利用低周疲劳试验结果和前人的研究成果确立了本文阻尼器的疲劳验算式。
The research work in this paper is included following: 1, A fatigue model based on the 'Strain Equivalent Hypothesis' is presented.
本文提出了考虑残余应变刚度下降的复合材料疲劳累积损伤模型。
The failure criteria of the cracked structural components for offshore structures and the fatigue model for repaired structural member are discussed.
首先讨论了海洋结构含裂纹构件的失效准则及修复构件疲劳性能的评价模型。
Comparisons made between experimental data and a theoretical fatigue model show good agreement, which can be used to predict the fatigue residual modulus of composites.
通过对弯曲疲劳加载后的剩余模量进行理论分析，验证了理论分析和实验数据之问的一致性，为实际预测复合材料剩余模量提供了依据。
The experiment built Exercise-induced fatigue model and Exercise-induced exhaustion model, observed and recorded the behavior changes of rat responding to sport stress;
实验首先建立运动疲劳和力竭动物模型，观察记录运动应激前后大鼠的行为学变化；
The peripheral fatigue model, which dominated for 100 years, holds that fatigue occurs when muscles begin to fail in a way that will ultimately lead to physiological catastrophe i. e.
神经末梢疲劳模型理论，这个理论已经主导了100年之久，它认为疲劳是由于肌肉开始衰退，最终导致生理上异常(比如：你会放慢速度或是停止)。
The results accords with the designed life of the crane by and large, showing that calculation results meet required precision for engineering, and that life fatigue model is practicable.
计算结果与起重机设计寿命基本相符，表明计算结果满足工程上精度要求，该寿命模型是实用和可行的。
Fatigue damage estimation of the tendons was made using fracture mechanics approach, establishing the fracture crack growth rate model and limit state equations for failure modes.
疲劳寿命的计算采用断裂力学方法，建立疲劳裂纹扩展模型和失效模式的极限状态方程。
Fatigue reliability interference model is established based on fuzzy cumulative damage of components, then general formula and simulation methods of fuzzy reliability estimation are derived.
建立了基于模糊累积损伤的构件疲劳可靠性干涉模型，导出了模糊可靠度评定的一般公式和仿真方法。
According to the characteristics of loads on blades, a model for estimating fatigue life of blades is presented based on three-dimensional finite element method and improved local strain method.
根据汽轮机低压叶片所受载荷的特点，建立了一种基于三维有限元法和改进局部应力应变法的叶片疲劳寿命预测模型。
The primary failure model is fatigue fracture that is always resulted by the crack initiation and propagation.
疲劳断裂是气门弹簧失效的主要模式，它是疲劳裂纹萌生及其扩展的结果。
A model for fatigue reliability analysis of structural members under random stress time courses is proposed.
提出了一种随机应力时间历程作用下构件疲劳可靠性分析的新模型。
Methods The animal model of chronic fatigue and the swimming experiment were used in this study, with the rat tail suspension test of the animal ethology method.
方法采用慢性疲劳动物模型，通过小鼠游泳实验，结合大鼠悬尾实验等动物行为学方法进行研究。
Objective To establish and assess the rat model of postoperative fatigue syndrome (POFS).
目的制作和评价大鼠手术后疲劳综合征模型。
In some cases, the continuous distribution model of fatigue failure life and stress amplitude level is more valuable in analyzing the damage of ponogena under complicated stress.
在某些情况下，如进行复杂应力条件下的疲劳素损伤分布分析，疲劳失效寿命和应力幅水平的连续分布模型更有意义。
Residual strength model is a proper methodology to describe the dynamic fatigue behavior of mechanical component.
剩余强度模型在描述试件的动态疲劳行为方面是一种比较切合实际的方法。
According to the fatigue failure character of riveted members, a simplified fracture mechanics model (SFMM) was developed.
根据铆接构件的疲劳破坏特征，建立了铆接钢桥简化断裂分析模型。
Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states.
在详细分析试验和有限元计算结果的基础上，提出了复杂应力状态下的低周疲劳寿命模型。
Therefore the device is suitable for bone fatigue damage test and for establishment of the model of bone microdamage.
实验证明该机适合于骨组织疲劳损伤实验，用于建立骨微损伤模型。
An anisotropic damage model for concrete subjected to compressive fatigue load is developed based on continuum damage mechanics and the concept of boundary surface.
基于边界面概念和损伤力学理论，建立了混凝土受压各向异性损伤模型。
According to the correlation between accumulative damage and loading level the fatigue damage model is established.
依据损伤演变与损伤状态、加载条件间的相关性，建立了相应的疲劳损伤模型。
According to the correlation between accumulative damage and loading levels, the fatigue damage model is established.
依据损伤演变与损伤状态、加载条件间的相关性，建立了相应的疲劳损伤模型。
In order to align kiln axis, taking equal fatigue strength of tyre and axis deflection minimum as the optimization goal, an equal fatigue strength optimization model of kiln tyre was set up.
从窑运行轴线调整出发，以回转窑各滚圈疲劳强度相近及轴线偏差最小为优化目标，建立了回转窑滚圈等疲劳强度优化模型。
Based on Continuum damage Mechanics, a general two stage model for accumulation of fatigue damage in composite materials is presented.
基于连续介质损伤力学的概念，建立了疲劳损伤演化两阶段模型。
The fatigue damage analysis method which is based on fatigue life model is briefly introduced.
并简要介绍了按疲劳寿命模型分析疲劳可靠性的方法。
The fatigue damage analysis method which is based on fatigue life model is briefly introduced.
并简要介绍了按疲劳寿命模型分析疲劳可靠性的方法。
应用推荐