• This paper analyzes the impact of a radar system trajectory measurement and correction of error Angle measurement accuracy factor.

    本文主要分析影响某弹道测量修正雷达系统精度误差因素

    youdao

  • A kind of calculation method for outputting motion error and return stroke error Angle of less toothed gear drive system was provided.

    提供了一齿数齿轮传动系统输出运动误差回程误差计算方法

    youdao

  • For the case of planar interception, the so called relative heading error angle between the relative velocity vector and the LoS (Line of Sight) is chosen as the output to be controlled to zero.

    针对平面拦截问题,选择导弹目标之间相对速度矢量与导弹-目标视线之间夹角(称为相对航向误差作为将要控制输出

    youdao

  • You can approximate the current roll Angle by integrating the roll rate over time, but you can't do so without some error creeping in.

    可以通过速率时间积分来估计当前横滚角度,前提是没有误差累积

    youdao

  • Thus a simple Angle measuring system is designed. Through the error analysis, its application prospects are presented.

    设计出了简易系统,并通过误差分析,说明了应用前景

    youdao

  • This paper gives the research and the analysis about the error source and the erasing method of error on the grating angle sensor.

    就光栅角度传感器误差来源以及消除误差措施进行分析研究

    youdao

  • The basic principles and calculating method of measuring the Angle error of triple prism are presented.

    本文论述了测量垂面棱镜角度误差基本原理计算方法

    youdao

  • This paper makes use of the elliptical parameter equation, present a generation algorithm of ellipse with division Angle increments, and makes error analysis.

    利用椭圆参数方程给出了以等分角度为增量的绘椭圆算法分析了算法的误差

    youdao

  • The micro Angle error between optical coordinate and mechanical datum coordinate of robot vision instrument due to mechanical assembly can be corrected by high accuracy calibration.

    机器人视觉仪器由于机械安装引起光学坐标系机械基准坐标系之间微小角度误差可以通过高精度标定修正

    youdao

  • Traditional stabilization precision measuring method is of great randomness because of the manual selection of Angle error signal, which effects the measuring precision.

    传统稳定精度测量采用人工方法误差信号进行处理,具有很大随意性使测量精度受到影响

    youdao

  • According to the uncertainty theory, this paper analyzes how the technical criteria influence the accuracy of Angle measurement and gets synthetical formula of Angle measuring error.

    论文研究了接收机各项技术指标精度综合影响问题,基于不确定度理论,得出了测角误差的合成公式

    youdao

  • In this paper the error models of Angle, range and speed due to multipath effect in low Angle radar tracking are given.

    给出了雷达仰角跟踪测量中由于多效应影响而引起的雷达仰角、方位角、速度距离误差估算模型

    youdao

  • Theoretical error of customary model created by diffraction Angle is eliminated so that the measurement accuracy is improved when the diameter is measured with the improved model.

    运用改进模型测量细圆柱体直径,克服了传统测量模型衍射引起原理误差提高测量精度

    youdao

  • This paper educed the error calculation formula of the mine directional Angle by using the method of guidance relation connected with the triangle observation.

    本文采用导向联系三角形观测方法导出矿井定向角度误差计算公式

    youdao

  • The error of inductosyn Angle measurement system will cause ripple of speed in DC motor control system. This error is equal to adding a disturbance to the input.

    由于感应同步器测系统误差的存在,相当于系统输入端加入了一个干扰,从而电机控制系统中引起电机速率波动

    youdao

  • In fact, the influence of Angle error on the dimension of one closed circle can't be neglected.

    事实上角度误差封闭尺寸影响忽视的。

    youdao

  • By using view Angle based error metrics, it transformed the screen projection of static error into the view Angle with respect to the viewpoint.

    算法采用基于视角误差度量方法静态误差屏幕上投影转换为误差相对视点的夹角

    youdao

  • A method of digital calibration in the amplitude and phase imbalances of sum and difference channels, and of angle error normalization processing is provided.

    提供了支路幅不平衡数字校正误差归一化处理方法

    youdao

  • A new optimum burst Angle model and it's error model are proposed, and then analyze the reasons which affect the error of burst Angle computing and how to estimate the measurable error.

    建立了引信最佳起爆模型及其误差分析模型,讨论分析了影响起爆角散布因素以及如何定量估计散布大小。

    youdao

  • Furthermore, an algorithm that can create the random Angle error directly is devised without considering the satellite observation platform error.

    此外考虑卫星观测平台误差的情况下,设计了直接产生随机测角误差的算法

    youdao

  • The problem that can be likely the lamina incontinuity is resolved, which is induced by calculating error of relatively liquid angle in the drawing lamina plane by two arc.

    圆弧绘制叶片平面投影图相对液流计算误差造成叶片不连续问题提出修正;

    youdao

  • The composition and principle of the platform were introduced, and the error equations of attitude Angle, velocity and position were given.

    介绍了平台组成工作原理并且推导平台角误差方程、速度误差方程位置误差方程。

    youdao

  • Combined with the Angle error extraction method mentioned above, the amplitude-phase imbalance is calibrated effectively. Thus, the measuring precision of Angle error is higher.

    结合上述误差提取方法,各通道间不平衡得到有效校正因此提高角误差测量精度

    youdao

  • Extend the expressions of the minimum mean squared error bounds of the references, and give the relations of the minimum mean squared error bounds of pose Angle and noise standard deviation.

    文献中已给目标方位角最小误差表达式进行了推导,并且给出方位角的最小均方误差噪声偏差之间的关系

    youdao

  • Through polar coordinate method error calculus demonstrated that the setting-out point error is mainly caused by Angle measurement error.

    通过极坐标误差计算论证放样误差主要误差引起

    youdao

  • Also, the paper analyses the error caused by capillary action of liquid, error precision, zenith Angle of hole and container diameter.

    液体毛细作用误差精度钻孔顶角容器直径引起误差进行分析

    youdao

  • This paper also presents a method to solve the tunnel axis displacement on line caused by angle error between tube center axis and datum of joint.

    分析了对接面与管段中心线夹角误差沉放后线路位置影响,提出了控制隧道轴线偏差的措施;

    youdao

  • During automatic operation, the stored points are implemented by the VMS with an accuracy of 0.1 degrees of Angle -error-free!

    自动运行期间,VMS将按照存储点自动运行,精确度0.1(角度误差),出错率为零。

    youdao

  • Then system error contains Angle measurement error, structure error, assembly error, bearing play etc. is discussed, and the compensation equations are given.

    然后研究了综合转角测量误差结构误差、安装误差、轴承窜动等在内系统误差,通过计算给出了补偿公式

    youdao

  • Then system error contains Angle measurement error, structure error, assembly error, bearing play etc. is discussed, and the compensation equations are given.

    然后研究了综合转角测量误差结构误差、安装误差、轴承窜动等在内系统误差,通过计算给出了补偿公式

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定