The controller also controls the working torque through engine controller.
同时,控制器还通过发动机控制器调控发动机的工作扭矩。
An electric to dry fuel lock-off control is incorporated in the engine controller.
一个电动烘干燃料锁控制器被合并在引擎控制器里。
The hybrid vehicle has an engine, an electric motor and an engine controller determining a crankshaft torque.
混合动力车辆具有发动机,电动机以及确定曲轴转矩的发动机控制器。
To design a good engine controller, the engine models, including static model and transient model, must be constructed accurately.
控制系统的设计需要有准确的发动机稳态和动态模型为设计依据。
The use of a continuously variable transmission(CVT) with an integrated engine controller allows great freedom of choice of the engine operating point to deliver the power demanded by the driver.
采用带有综合发动机控制装置的无级变速器对驾驶员要求的传动功率选择发动机工作点许可很大的自由度。
The authentication engine is implemented as controller and tasks commands.
认证引擎是以控制器和任务命令的形式实现的。
Using neutral networks, the relationship between engine flight conditions, states and the parameters of controller are fitted, and the controller characteristics in full flight envelope are verified.
利用神经网络拟合发动机飞行条件、状态与控制器参数之间的关系,验证了控制器在全飞行包线内的性能。
The engine of data channel is DMA controller. We make use of the Chain ModeDMA strategy, and enhance the bandwidth performance of data.
DMA控制器是数据通道的引擎,这里我们采用了链式DMA的策略,大幅度地提高了硬件传输的带宽。
Performance result was found in good agreement with theoretical analysis, which would be useful for engine field maintenance and controller design improvement.
特性分析的结果与理论研究相一致,该研究对发动机外场维护及控制器的设计改进有指导意义。
Constructed here is a dynamic mathematic model of fuel cell vehicle powertrain which is composed of fuel cell engine, DC motor and its controller and power battery.
建立了包括燃料电池发动机、电机及其控制器、动力蓄电池组在内的燃料电池轿车动力系统的动态数学模型。
Electric control system is the "nerve centre" of Yuchai Euro III engine which composes of sensor, controller, actuator and control cable harness. See the Figure 37.
电控系统是玉柴电控欧iii发动机的“神经中枢”,包括传感器、控制器、执行器和控制线束。如图37所示。
The proceedings of idle speed are so complex that it is very difficult to design a good controller based on the mathematical model of gasoline engine idling condition.
由于发动机的怠速运转是非常复杂的一个过程,所以要在发动机怠速的数学模型的基础上来设计控制器是很困难的。
The results showed that the adjustment by spark advance angle on the idling speed was notable, thus, CMAC controller is an effective approach for controlling engine idling speed.
结果表明点火提前角的自动调节对怠速稳定性的控制效果明显,CMAC控制器能有效地用于发动机怠速控制。
The paper gives the design scheme of the intelligent electronic controller of the automobile engine based on CANBUS, including the control structure of hardware and control algorithm of software.
给出了基于CANBUS的汽车发动机智能电子控制器的设计方案,包括系统硬件控制结构和软件控制算法。
By analyzing the architecture of simulation Engine, it was viewed as a special federate and composed of the three components: simulation scheduler, simulation controller and data recorder.
通过分析仿真引擎的系统体系结构,将仿真引擎视为一个特殊的邦元,并对其三个组成部分:仿真调度器、仿真控制器以及数据记录器进行分析、设计与实现。
Experimental results show that the control result of the controller is excellent, and the control performances for engine testing completely satisfied the demand of quality control.
经试验验证了控制器控制效果良好,完全满足发动机台架试验对控制品质的要求。
In the paper, engine electronic controller(EEC) which is fit for distributed system is designed from the way of hardware and software, such as regular pulse generator.
从软、硬件角度设计了适用于分布式系统的发动机电子控制器,如周期信号发生器;
Combined with control characteristics of engine air fuel ratio, the CMAC controller which is self adaptive to compensate fuel injection volume is studied.
结合发动机空燃比的控制特征,研究了一种能自适应补偿喷油量的CMAC控制器。
Thermodynamics model of some turbofan engine was established. Working condition of Engine Electronic Controller (EEC) and main fuel pump regulator in laboratory were set up.
建立了某涡扇发动机气动热力学模型和该型发动机综合电子调节器、主燃油泵调节器的实验室工作环境。
NN controller of the scan mirror engine is researched in the theory, its steady condition is given, its feasibility is proved by the results of computer simulations.
在理论上研究了扫描镜电机的神经网络控制器,给出了其稳定的条件,并通过计算机仿真结果证明了它的可行性。
This paper introduces a new fuzzy PID controller which can be used in the automotive engine test bench, the advantage of this PID cont roller lies in the online self-tuning function of PID parameter.
本文提出了一种应用于汽车发动机测试台架的模糊pid控制器,这种PID控制器优点在于PID参数可在线自整定。
Construct dynamic mathematic model of the fuel cell vehicle powertrain which is composed of fuel cell engine, DC motor and its controller, as well as the power battery.
建立了包括燃料电池发动机、电机及其控制器、动力蓄电池组在内的燃料电池汽车动力系统的动态数学模型。
The hardware and software of ignition advanced angle controller are designed in this base. LPG engine with high compression ratio had been tested.
在此基础上设计了点火提前角控制器的软件和硬件,做了高压缩比的LPG发动机试验。
There is AC request switch on instrument panel; the controller will control the engine and keep it running smoothly once the controller receives the request signal of AC turning on.
在车辆的仪表盘上有空调请求开关,一旦控制器接收到空调打开的请求信号,控制器将对发动机进行控制并保持正常运行。
The intelligence node has been applied in diesel engine and generator controller of hybrid electrical vehicle and the need of powertrain controller has been met.
该智能节点已应用在混合动力柴油发电机组控制器中,满足了控制需要。
The controller adjust travel speed automatically according to load condition to realize automatic power distribution, so that operation quality is guaranteed via fully utilizing engine power.
控制器根据负载变化情况,自动调节行走速度实现功率自动分配,以充分利用发动机功率保证作业质量。
This paper introduces the single neural cell adaptive control based on the traditional PID controller and puts the optimization goal of the engine speed control system.
本文在常规的PID控制的基础上引入单神经元自适应控制,提出了发动机转速控制的优化目标。
Electric system: Adopt PLC controller which is special used to the construction machinery. It can realize gear control, overload protection for engine, state supervision and trouble indication.
电气系统:采用工程机械专用的PLC控制器,可实现档位控制、发动机过载保护、状态监控与故障提示。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A new frequency control scheme using fuzzy feedforward compensation and fuzzy - PID for natural gas engine generating set was proposed and the controller was designed.
提出了天然气内燃发电机组频率采用模糊前馈补偿和模糊pid反馈协调控制的方法,并设计了控制器。
应用推荐