The model of ball-end cutter milling forces is studied.
对球头铣刀铣削力建模进行了研究。
The model includes the geometric characteristics of ball-end cutter and the calculation of milling forces.
该模型包括球头铣刀的几何特征和铣削力的计算。
An algorithm for interference checking and Angle adjustment of 5 axis nc machining to flat end cutter is proposed.
提出了一种平底刀五坐标数控加工的干涉检测及刀位角修正算法。
During the sculpture surface milling machining, cutting force in ball end cutter along the tool path can be calculated according to the force model.
雕刻表面球形铣削加工中,根据刀头的受力模型,可以计算整个刀具路径上刀头的受力。
A new algorithm of automatic generation of interference free cutter location path for nc machining of free form surfaces with flat end cutters is proposed.
提出了一种新的曲面平头立铣刀加工无干涉刀位轨迹自动生成的算法。
A flat-end cutter was used, its paths were generated based on the constant scallop height principle and machining strips were enlarged by adjusting inclinati.
提出了一种四坐标联动等残留高度端铣加工任意曲面叶片的方法。
A manufacturing model for the ball end cutter is presented, and the feasibility of grinding ball end cutters of different sizes using the same mechanism is discussed.
文中给出球面铣刀的制造模型,探讨了运用同一机构磨制邻近规格的不同球面铣刀的可行性问题。
So long as designers input slot section parameters of end cutter, the coordinate of formed milling cutter profiles is calculated automatically, and cutter profile graph is drawed by computers.
设计者只要输入立铣刀的槽形参数,计算机便可自动计算出成形铣刀廓形坐标并绘制出刀具廓形图。
But the Garlic Cutter at the other end already knows about Veronica and she has faith that Veronica can be dealt with.
那是电话另一端的女人已经知道了有关Veronica的情况,她相信Veronica这件事是可以被解决的。
Use the reaming blade on the end of the tube cutter to remove any burrs.
用截管器尾部的铰刀清除毛边。
By mathematical calculation and using a copying fixture, the orbit of movement of an end-milling form cutter is obtained.
通过数学计算与使用靠模夹具,求得铣削回珠器回珠槽指状铣刀的运动轨迹。
The hovel of a cutter of wood into lengths for burning was the only house at that end; all else was wall.
那里唯一的房屋是一个把柴锯成短段便于烧壁炉的工人的小棚屋,此外便只有墙壁。
Ball End milling cutter is widely used in industry. The quality of the cutter directly decides the milling surface's roughness, accuracy and efficiency of the milling process.
球头立铣刀的应用越来越广泛,其质量好坏直接影响到加工对象的表面质量、精度及加工效率。
No beating the collet and cutter head in the process of unloading knife. No bumping, peening, striking the shaft end during the process of transporting, storing and using.
卸刀时严谨敲打筒夹及刀头。运输、保管及使用中严谨磕碰、敲击、撞击电主轴轴端。
The driller checks the end of the new drilling line for damage, and cut off any defective section by using of a hydraulic line cutter.
司钻检查新大绳的快绳头,如有任何损伤或缺陷,就用液压切绳器把它切掉。
The application of rotatable-position end milling cutter and intelligent special cutter is introduced in this paper.
分析高效切削刀具材料的主要特征,介绍可转位立铣刀和智能化专用刀具的应用。
In the geometry modeling of ball end mill cutter, consideration of cusp effect of ball milling, accurate cutting Angle range corresponding to different axial cutting depth are deduced.
在球头铣刀几何建模中,考虑铣刀残余高度的影响,推导了不同轴向切深时对应的切入角与切出角范围。
Single-edged aluminum milling cutter----the best end mill for various aluminum panel.
单刃铝用铣刀-------最适合雕刻机加工切割铣削各种铝板。
The substance of this kind of cutter is described and a design result is given at the end of this paper.
对不等齿距端铣刀的实质进行了分析,并给出了设计结果。
According to the theory, a plane machining method by end milling cutter is given.
并且根据这一理论,给出端铣刀立铣加工平面的计算方法。
The vibration model of ball end milling process concerning the effect of cutter flexibility is presented.
建立了考虑刀杆柔性的球头铣刀铣削振动模型;
This paper presents an algorithm of generating three kinds of tool paths and a formular of calculating tool center paths when machining parts with cylindrical end-milling cutter.
本论文介绍了生成三种刀具轨迹的算法,并且给出用立铣刀代替球铣刀加工实体零件时刀具中心轨迹的计算公式。
The experimental results showed that high quality of cavity surface can be obtained by using appropriate technologic parameter and trochoidal milling mode with micro-end mill cutter.
试验结果表明:采用小直径刀具,合适的工艺参数,次摆线分层走刀方式能加工出高质量的型腔表面。
A simple milling force model for end-milling cutter is improved. The dynamic milling force and moment models are proposed.
将一种简易的端铣刀铣削力模型改进为动态铣削力模型,并给出了铣削力矩模型。
The results in this paper will provide a reliable theoretical guidance to the design of the diamond end milling cutter.
分析结果可以为高速切削金刚石立铣刀的设计提供可靠的理论依据。
Let the finite element analysis method be introduced into the CAD of carbide end mill, and carry out an analysis on the strength and rigidity of the cutter.
将有限元分析方法引入硬质合金立铣刀CAD中,对刀具的强度、刚度进行分析。
By the experiment of high-speed milling aluminium alloy with carbide end milling cutter, the method of helical chip formation was researched.
通过硬质合金立铣刀高速加工铝合金的铣削试验,对螺旋状切屑的成形进行了研究。
If serious deformation is occurred, the manual operated cutter or gas cutter to be used for correction to ensure the re-bar end surface perpendicular to the axis.
如有严重变形时应用手提切割机切割或用气焊切割、矫正,以保证钢筋端面垂直于轴线。
Specification: twist drill, three-blade drill, reamer, end-milling cutter.
规格:麻花钻、三刃钻、铰刀、立铣刀。
Specification: twist drill, three-blade drill, reamer, end-milling cutter.
规格:麻花钻、三刃钻、铰刀、立铣刀。
应用推荐