The present invention relates to the technology of color display tube manufacture and is especially a kind of organic emulsion film material.
本发明涉及彩色显象管制造技术领域,特指采用胶乳法成膜工艺中有机乳胶膜配方中的一种材料。
Abrasion Marks: Scratches on film caused by dirt, improper handling, grit, emulsion pile-ups, and certain types of film damage (e. g., torn perforations).
刮痕:由污物、不正确的处理、砂砾、乳剂堆积和特定类型的胶片损伤导致的胶片刮伤(例如:齿孔磨损)。
The color and film performance of emulsion paint are closely related with the composition of base paint.
乳胶色漆的颜色准确性和涂膜性能与基础乳胶漆的组成关系密切。
This kind comes from new science and technology of Europe, it is will liquefacient colophony emulsion infuse in tailor-made mould, pour film to shape through high temperature.
这种来自欧洲的新科技,是将液化的树脂乳胶注入特制的模具之中,通过高温倒膜一次成型。
The properties of the emulsion and the film cast from the emulsion were studied.
讨论了聚氨酯用量对丙烯酸甲酯乳液聚合及其膜性能的影响。
It is shown that conventional emulsion polymerization process leads to high gloss film and soap-free or micro-soap processes will lead to good water resistance and lower foaming.
研究表明采用常规乳液聚合涂膜的光泽较高,而采用无皂和微皂乳液聚合涂膜的耐水性较好,涂料的起泡性较低。
Assistant of film forming plays an important role in emulsion paint, it can low temperature of film forming of emulsion paint, improve characteristic of film forming of emulsion paint.
成膜助剂在乳胶漆中起着重要作用,它能降低乳胶漆的成膜温度,改善乳胶漆的成膜性能。
Light forming an image on the film is scattered by passing through the emulsion or by reflection at the emulsion or base surfaces.
在胶片上产生影像的光在通过乳剂时发散,或在乳剂和片基表面发生发射。
Mechanics of film forming of emulsion paint, action and effect of assistant of film forming are analyzed.
本论文对乳胶漆的成膜机理、成膜剂的选择以及成膜剂的作用及其影响因素作了分析。
Imperfect transmission is the glass or film upon which the emulsion is coated.
涂乳胶的玻璃片或软片不完全透明。
Putty and finish two-in-one interior wall coating was preparation by use of re-dispersible emulsion powders prepared in the lab as film forming materials and cement as inorganic binder.
以自制的可再分散乳胶为主要成膜物质,结合水泥水硬性无机粘结剂制备了腻子面漆二合一内墙涂料,重点讨论了可再分散乳胶粉、纤维素醚、粉状憎水剂对涂膜性能的影响。
Study was made of synthesis of film forming material for glass microballoon emulsion coating and influence of various factors on polymer film performance is described.
研究了玻璃微珠乳胶涂料成膜物的合成,叙述了各种因素对聚合物涂膜性能的影响。
The results indicated that the water resistance and the adhesion power of the film were improved obviously by the polymerization of emulsifier-minor emulsion.
实验结果表明,采用微皂乳液聚合明显地改善了涂膜的耐水性和附着力。
A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.
用核-壳乳液聚合方法制备了室温成膜低voc丙烯酸类上光涂料。
Emulsion paint is' green coating, but its property of film forming is poor.
乳胶漆是绿色环保涂料,但它成膜性较差。
When hinder organic silicone monomer with isopropoxy was used, organic silicone level, emulsion stability and film performance could be improved.
使用含异丙氧基的阻碍性有机硅氧烷单体可提高乳液聚合的稳定性、增加有机硅氧烷的用量、改善涂膜性能。
Film positives must be submitted with text facing up and emulsion membrane facing down, and accompanied by monochrome print samples.
提供正片菲林文本在上,药膜在下,并伴有单夹色打样。
The relationship between the film forming and the free volume of the emulsion paint is discussed. Meanwhile, several methods of preparing the VOC-free emulsion paints are given.
讨论了乳胶漆的成膜性与自由体积的关系,并介绍了制备零VOC乳胶漆的几种方法。
The rutile TiO_2(sulfate process) was treated with inorganic salts to form a porous coated film that increases its dry hiding power in matt emulsion coating films.
硫酸法金红石型二氧化钛用无机盐类进行表面处理后,形成疏松多孔的海绵状包膜,提高了它在平光乳胶漆膜中的干遮盖力。
This article reports the preparation process of the photopolymer emulsion, and the effects of the monomer, film former and inhibitor on the photosensitivity and image forming property of the emulsion.
介绍了耐水型光聚合丝印感光胶的制备方法,讨论了成膜剂、活性单体、阻聚剂等对感光胶感光成像性能的影响。
This article reports the preparation process of the photopolymer emulsion, and the effects of the monomer, film former and inhibitor on the photosensitivity and image forming property of the emulsion.
介绍了耐水型光聚合丝印感光胶的制备方法,讨论了成膜剂、活性单体、阻聚剂等对感光胶感光成像性能的影响。
应用推荐