• A novel micro electrical discharge machining(EDM) method is described.

    论述种新的微细电火花加工方法

    www.xjishu.com

  • Comparative measurements of percentage of silicon on the surface of workpiece by powder-mixed electrical discharge machining (EDM) were carried out.

    对不同加工条件下电火花加工工件表面含量进行对比测量

    www.xjishu.com

  • Electrical discharge machining (EDM), or spark machining, as it is so called, is based on the eroding effect of an electric spark on both the electrodes used to produce.

    放电加工称为电火花加工基于电极之间产生电火花腐蚀作用实现

    blog.163.com

  • When applying the electrical discharge machining process, the material is eroded as a result of electrical discharge between tool and work.

    采用电火花加工质料东西工件孕育发生电火花分解。

    www.9988222.com

  • Based on the machining theory of rotation wire electrode, a new kind of WEDM machine tool —vertical wire electrical discharge machining with rotation wire is presented in this paper.

    基于旋转电极加工机理提出新型的电火花线切割机结构形式———立式旋转电火花线切割机。

    www.xjishu.com

  • The newest trends of electrical discharge machining(EDM) including die-sinking EDM, micro EDM and wire EDM(WEDM) in Japan were presented.

    综述日本放电加工领域最新研究动态包括成形放电加工微细放电加工线切割放电加工三部分内容。

    www.dictall.com

  • The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).

    分析线切割工作工作特点工作状态,从生产实践中总结出科学合理选择使用工作方法

    www.dictall.com

  • From the point of improving process efficiency and process quality, the characteristic in the process course of electrical discharge machining (EDM) was analyzed.

    提高系统加工效率加工质量角度出发首先分析了电火花加工过程特点

    www.chemyq.com

  • The machining precision and surface quality are introduced in electrical discharge machining and their causes as well as improved measures are put forward.

    介绍电火花加工常见的加工精度表面质量问题以及产生原因相应改善措施

    www.chemyq.com

  • This paper not only introduces the electromagnetic measurement method in EDM (Electrical Discharge Machining) spark locations detection, but also indicates the principle of this method.

    提出电磁信号检测法电火花加工放电位置检测中的应用,讨论了检测方法基本原理

    www.ilib.cn

  • The concept, characteristics and application of high energy beam machining, electrical discharge machining, electrochemical machining and material abscission machining separately discuss.

    分别论述高能束流加工电火花加工电解加工,以及物料加工概念特征应用状况

    http://dj.iciba.com

  • Some of the technological characteristics of powder-mixed electrical discharge machining (EDM) have been studied in order Io further develop the technology.

    为了进一步完善电火花加工工艺,对粉电火花加工一些工艺特性进行研究

    www.chemyq.com

  • The Electrical Discharge Machining (EDM) has been a very important method of machining, and performs its alternative function in industry.

    电火花加工已经发展成一种极其重要加工手段工业界发挥着不可替代作用

    dict.cnki.net

  • This paper presented a powder mixed near dry electrical discharge machining(PNDEDM), its dielectric is gas-liquid-solid mixture.

    提出一种电火花加工技术,加工介质三相流混合物

    www.dictall.com

  • Abstract: The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining(EDM) and its drive and control principle.

    文摘介绍椭圆微驱动电火花加工机理基础上,分析了椭圆微驱动器驱动电路的要求。

    dj.iciba.com

  • Micro electrical discharge machining (MWEDM), a nontraditional micro gear die fabrication method, is presented in this paper.

    气中电火花线切割加工技术近几年出现一种新技术,采用气体作为加工介质。

    www.dictall.com

  • The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining(EDM) and its drive and control principle.

    介绍椭圆微驱动电火花加工机理基础上,分析了椭圆微驱动器驱动电路的要求。

    dict.cnki.net

  • Due to a little quantity, electrical discharge machining(Micro-EDM) is usually developed in single production, leading to long production cycle, repetitive design and high cost.

    微细电火花机床的需求通常根据用户具体需要进行单机生产,机床研制周期设计重复成本

    www.chemyq.com

  • In order to study the mechanism of electrical discharge machining(EDM), the energy distribution of cathode and anode was calculated based on photon emission.

    为了研究电火花加工过程机理基于光子发射计算阴极阳极能量分布

    www.dictall.com

  • In addition, the feature of low electrode wear ratio of the electrical discharge machining in gas(dry EDM) is helpful to implement the tool electrode wear compensation in dry ED-Milling.

    此外气体介质中电火花加工工具电极损耗特点有利于实现电火花加工工具电极损耗补偿

    dict.cnki.net

  • Pulse generator is the key technology for electrical discharge machining(EDM).

    脉冲电源电火花加工关键技术

    www.chemyq.com

  • A new EDM technology-ultrasonic vibration assisted electrical discharge machining in gas was proposed and corresponding experimental equipment was designed.

    简述超声振动辅助气体介质电火花加工原理设计开发相应实验机床

    www.dictall.com

  • The research on the technologies of micro wire electrical discharge machining (micro-WEDM) was presented.

    进一步研究气中电火花线切割加工工艺规律提供了理论依据

    www.dictall.com

  • The advantage is that electrical discharge machining processes with good surface roughness and machines metal of any hardness.

    电火花加工的主要优点获得表面粗糙度并且可以加工任何硬度金属

    blog.163.com

  • The analysis, design and performance of an auxiliary power suitable for use in EDM (Electrical Discharge Machining ) is presented.

    介绍应用电火花加工控制和检测系统中的辅助电源工作原理、参数设计性能指标

    www.chemyq.com

  • The samples of polycrystalline diamond(PCD) were discharge machined by adjusting the main parameters of electrical discharge machining.

    通过调整电火花成形加工主要放电参数聚晶金刚石PCD样品进行放电加工

    www.dictall.com

  • The samples of polycrystalline diamond(PCD) were discharge machined by adjusting the main parameters of electrical discharge machining.

    通过调整电火花成形加工主要放电参数聚晶金刚石PCD样品进行放电加工

    www.dictall.com

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定