Dumping bodies from the furnace 2-reducer from the furnace on both sides of the dumping electric furnace steel casting purposes.
倾炉机构由2台减速机从电炉两侧电动倾炉浇注钢水之用。
To take away the refining part of the steel making cycle off an electric arc furnace, which is discussed elsewhere, is an excellent start.
把炼钢周期中的精炼阶段从电弧炉中移走（这个问题将在别处加以讨论），是一个良好的开端。
Since the property requirements are so special, tool steel are usually melted in electric furnace using careful metallurgical quality control.
由于需要的性质是如此特别，工具钢通常使用冶金质量控制的方法在电炉中熔化。
The electric arc furnace steel-making productivity has gained rapid progress in the recent years.
近几年来，电弧炉炼钢生产率有较大的提高。
The electric arc furnace (EAF) steelmaking is the main method used to produce special steel and alloy steel.
电弧炉炼钢是用来生产特殊钢和高合金钢的主要方法。
Most of the steel for line pipe is made by open-hearth, electric furnace, and basic-oxygen processes.
大部分建管道用管子的钢材由平炉、电炉和碱性顶吹转炉生产。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hytrogen furnace was introduced.
介绍了无涂层电工钢冲片叠片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hydrogen furnace was introduced.
介绍了无涂层电工钢冲片迭片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
Leaning furnace machine electrically lean furnace and pour molten steel by 2 speed reducers from the both sides of electric furnace.
倾炉机构由2台减速机从电炉两侧电动倾炉浇注钢水之用。
EAF (Electric Arc Furnace), LF and VD are key equipments of steel-making.
电炉(EAF)、钢包精炼炉(LF)和VD炉是电弧炉炼钢的关键设备。
The workability, strength, setting time and shrinkage of cement mortars with Bao Steel rotating furnace slag (BSRS) or electric furnace slag (EFS) as substitute for sand were studied.
研究了宝钢转炉滚筒渣、电炉渣代砂建筑砂浆的和易性、强度、凝结时间和收缩等性能。
The effects of various factors on decarburization of high speed tool steel annealed in bogie hearth electric furnace were investigated in this paper.
研究了高速钢轧材在台车式电阻炉中退火加热过程中，各因素对脱碳的影响。
The systems can be designed to receive, dispense, deliver and store flux and alloy raw materials used in the production of steel at electric arc furnace, ladle furnace, and ladle degassing operations.
这一系统可以接受、分配、发放和储存用电弧炉、钢包炉和钢排气操作来生产钢的焊剂和合金原料。
Widely used in electric heaters, electric arc furnace steel, calcium carbide, iron alloy, such as mining and metallurgy furnace.
广泛用于电加热器、炼钢电弧炉、电石、铁合金、矿冶电炉等。
VD electric furnace is a king of degasification equipment from molten steel during steel making process.
VD炉是冶金行业冶炼过程中的一种钢液脱气设备。
Steel making arc furnace uses electric power to melt steel. The amount of power put into the metal scrap is controlled by positioning three electrodes.
炼钢电弧炉是利用电能来炼钢的，可是输入炉内的电功率大小是靠三根电极位置来决定的。
The CONSTEEL process introduces a new concept in electric steel -making. The process USES the furnace off-gas and fuel to preheat the scrap fed into the furnace.
康斯迪工艺提出了电炉炼钢新概念：即利用电弧炉排出的高温废气对送往炉中的炉料进行连续预热。
At the same time, it describes the operation practice of controlling impurities during melting and casting period in electric furnace factory of ECheng steel company.
同时介绍了鄂钢电炉厂在冶炼和连铸过程中控制夹杂物的操作实践。
Technical development trend of domestic and abroad steel making by electric furnace are expounded in this paper.
综述国内外电炉炼钢技术发展趋势。
The first electric arc furnace was installed. The arc furnace recycled locally collected scrap steel by melting and refining, then continuously casting the molten steel into billets.
建成自己的第一座电弧熔炉，将本地收购的废铁回收再造，重新熔化、精炼，然后连续铸造成钢鉟。
In metallurgical industry and in machine building industry, any steel making process (converter or electric steel furnace) needs to control the variation in molten steel composition and temperature.
冶金和机器制造工业的炼钢(转炉、电炉)过程中，需要控制钢水温度的变化。
In metallurgical industry and in machine building industry, any steel making process (converter or electric steel furnace) needs to control the variation in molten steel composition and temperature.
冶金和机器制造工业的炼钢(转炉、电炉)过程中，需要控制钢水温度的变化。
应用推荐