Elastic contact problem is introduced in the first chapter.
第一章简要介绍了弹性体接触问题。
The stress distribution in the Hertz's elastic contact between two spheres is reviewed briefly.
本文简要回顾了两球面之间赫兹弹性接触的应力分布。
The interaction between wheel and rail conforms to the Hertzian nonlinear elastic contact theory.
轮轨相互作用遵从赫兹非线性弹性接触理论。
The gear teeth engagement of gear transmission was being studied as a Non-Hertz elastic contact problem.
并采用赫兹接触理论和有限元方法分析渐开线齿轮的接触应力。
The parametric extremum variational principles are deduced for the plane and three dimensional elastic contact problems.
本文给出了平面与空间接触问题的带参变量的变分极值原理。
A new mixed variational formulation is presented for the elastic contact problem with application of least-square method.
采用最小二乘法对弹性接触问题提出了一种新的混合变分形式,对该变分问题解的存在唯一性进行了论证。
In this paper, a finite element method analyzing the big end of a connecting rod with the elastic contact condition is presented.
本文对连杆大端提出一个按弹性接触条件求解的有限元方法。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样,该原理可望用于有限元数值分析中。
In this paper results of observation and calculation with the finite element method of elastic contact are introduced. They are correspondence.
本文介绍了原型观测和弹性接触有限元法计算相当符合的成果。
A boundary element method based on an iterative technique for solving the three-dimensional elastic contact problem without sliding is presented.
本文提出了一种基于迭代技术的边界元法求解三维无滑动摩擦型弹性接触问题。
This paper treats of the theory of elastic contact problems and presents a process of computation by matrix condensation of the finite element method.
本文论述了弹性接触问题的理论及用有限元凝聚法进行计算的过程。
This paper discusses the optimization problem of 3-D elastic contact objects in theory using BEM, and analyze the real contact problem of helical gears.
本文以边界元法作为应力分析工具,对三维弹性接触问题的形状优化问题进行了理论上的探讨,并对斜齿轮接触问题进行了实际分析。
A 5-node pseudo element of 3-d elastic contact analysis ws applicable range and concrete practice were also discussed. Its reliability was checked by two examples.
构造了3维5节点接触伪单元以处理固体或壳体接触问题的边界非线性,讨论了其适用的范围和具体应用的情况通过算例,验证了其可靠性。
The effects of several factors on contact problems are discussed, and the experiment examination is provided for the numerical solution of elastic contact problems.
分别探讨了几个因素对接触问题的影响,为数值求解平面弹性接触问题提供实验验证。
An accurate account of the contact problem of an elastic indenter and a laminated beam is given by using the mixed finite element method for solving elastic contact problems.
本文采用处理弹性接触问题的有限元混合法研究了弹性压头与复合材料层合梁间的弹性接触问题。
The elastic contact problem is analyzed in finite element method (FEM) and is used to the parameters' distribution and contact stress of the joint are obtained on the base of ANSYS code.
基于ANSYS软件平台求解弹性接触问题,获得了榫联接结构接触应力及接触状态量的分布;
Basing on the analysis of combined axial symmetry problem by the increment theory and substructure method, this paper presents a new method for solving the elastic contact problem in general.
本文运用增量理论和子结构方法在具体分析组合轴对称问题的基础上,提出了解决一般弹性接触问题的新方法。
The author has brought the theory of elastic contact to a better completion by raising the convergency of the contact problem. A method of classified loading in computation is also introduced.
作者进一步完善了弹性接触条件的处理方法,使接触问题的收敛性大大提高,同时还提出了分级加载的计算方法,这就使接触问题的理论更加完善。
Because the skin is elastic, the print is distorted, Wang says, adding that the SLI system has no such contact or distortion.
王补充道,因为皮肤是有弹性的,指纹会变形,而SLI系统不需要进行这种接触,没有失真。
Considering the tangential force applied on a contact spot, the critical area demarcating the elastic and plastic regimes is obtained by comparing the normal elastic load with the normal plastic load.
计及作用于接触斑点上的切向力,通过比较作用于接触斑点上的法向弹性载荷与法向塑性载荷,确定了区分弹性接触与塑性接触区域的临界接触斑点面积。
Skin is very elastic (that's why they call it "plastic surgery") and tends to conform to objects it comes in contact with.
皮肤是非常有弹性的(这也是为什么他们叫它“plasticsurgery”),很容易适应它所接触的东西。
The total adhesive friction coefficient is expressed as a combination of adhesive friction coefficients in elastic and plastic contact regime.
总的粘着摩擦系数被表示为弹性接触区与塑性接触区的粘着摩擦系数的组合。
The deformations in consideration include contact deformation and elastic deformation.
考虑的工件变形包括接触变形和弹性变形。
The contact zone width of crane wheel with track is analyzed by plane stress elastic theory.
采用平面应力弹性理论,对吊车车轮与轨道的接触区尺寸进行理论分析。
Reflection and refraction of harmonic elastic waves at a unilateral frictional contact interface is studied theoretically in this paper.
研究简谐弹性波在一般各向异性介质单侧接触界面上的反射和折射问题。
Because of the bolted joints between the elastic body and the pressed body in this kind of load cell, the contact between them will have serious influence on the load cell hysteresis.
由于这种传感器的弹性体与底座之间采用螺栓联结,弹性体与底座以及弹性体与螺母之间的接触将对传感器的滞后特性产生重大影响。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究,建立了二维弹性大变形接触问题的一般实用有限元分析模型。
An iterative process has to be carried out in the boundary element analysis of the contact between elastic roller and rigid plane.
用边界元法分析弹性滚柱与刚性平面的接触问题,需要采用迭代算法。
Comprehensive function of varying contact length backup roll (VCR) is analyzed by using the finite element model for elastic deformation of rolls.
利用建立的有限元辊系弹性变形模型,分析了变接触支持辊(VCR)的综合性能。
Comprehensive function of varying contact length backup roll (VCR) is analyzed by using the finite element model for elastic deformation of rolls.
利用建立的有限元辊系弹性变形模型,分析了变接触支持辊(VCR)的综合性能。
应用推荐