The results are more conformable to the situs observations than those of the elastic-plastic model.
算例表明这一方法更为符合实际基坑工程的观测结果。
In order to study how the static preloading affects on the buckling stability of columns or cylindrical shells, a simple imperfection-sensitive elastic-plastic model is used.
为了研究静力预加载荷对诸如柱、圆柱壳等结构动态稳定性的影响，采用了一种简单的缺陷敏感弹塑性模型。
In the structural mechanical analysis, previous research is more to establish elastic or elastic-plastic model to study the grid reinforced effect on pavement stress and deflection.
在结构力学分析方面，以往的研究多是建立弹性或者弹塑性模型来研究格栅对沥青路面应力及弯沉的影响。
Establish finite element model, and use elastic - plastic mechanics to discuss stress-stain state of elastic and plastic deformation in cutting zone.
根据正交切削特点建立了有限元模型，应用弹塑性力学讨论了切削变形区的弹、塑性阶段的应力、应变状态。
Conventional acoustic wave model, elastic wave model and elastoplastic wave model can be considered as the special cases of plastic wave model.
传统的声波模型、弹性波模型、弹塑波模型可视为塑性波模型的特殊情况。
This paper deals with computation of elastic Plastic F. e. m. for this centre cracked plate by ADINA Program. The computing result for this plate of plane stress model and test result were very close.
本文论及针对这种试板，调用ADINA程序进行弹塑性有限元分析，平面应力模式下的计算结果与实际测试结果十分接近。
We used periodic symmetry constraint on FEA Model. Elastic plastic finite element principle used in analysis process.
用弹塑性有限元法分析超速预过载处理后叶轮的残余位移、应变及应力场 ，给出相应的求解结果。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
Based on the mechanism analysis, the elastic plastic model of space formation caused by blasting with linear charges is established.
通过对条形装药爆破成腔机理的分析，建立了爆炸挤压成腔弹塑性简化模型。
The peculiarity of this wellbore stability model is to determine whether the wellbore rock is in the critical plastic state rather than elastic limit state.
依据井壁围岩是否达到临界塑性状态而不是弹性极限状态来判断井壁稳定性是气体钻井井壁稳定分析模型的特殊之处。
Based on the model of elastic-plastic mechanics, this paper presents the conception of equivalent ultimate settlement of single pile, which is studied with results of static loading tests on piles.
本文根据弹塑性力学模型，提出了单桩等效极限位移的概念，并结合桩的静载试验成果，对其进行了分析探讨。
Furthermore, hardness, plastic coefficient and elastic coefficient have also been introduced in this model to describe the rock nature in con...
并在该模型中用岩石硬度、塑性系数和弹性系数来反映岩石的力学性质，从而使模型具有较宽的应用范围。
The elastic-plastic deformation of the vessel shell is taken into account in the model to suit for the crack problem of the vessel shell in the plastic deformation range.
模型考虑容器壳体材料的弹性、塑性变形，适用于容器外壳在塑性变形范围内发生破裂的问题。
This paper deals with computation of elastic Plastic F. E. m. for this centre cracked plate by ADINA Program. The computing result for this plate of plane stress model and test result were...
本文论及针对这种试板，调用ADINA程序进行弹塑性有限元分析，平面应力模式下的计算结果与实际测试结果十分接近。
Based on the finite element analysis the outrigger, this paper presents an elastic plastic dynamic analysis to system by using the combined Member story model.
对结构采用精细的弹塑性模型进行动力弹塑性分析，梁柱单元用塑性区模型，剪力墙用带分布钢筋的壳元+混凝土弹塑性损伤模型。
For example, the famous modified Cambridge model can display the elastic - plastic property of soil, but it can not display the rheological behavior of soil.
比如著名的修正剑桥模型能较好的反映土体的弹塑性，但不能考虑流变特性。
In this computation a fluid-elastic plastic model and a finite difference method of Lagrange coordinate are used The parameters of shock, cavity and waveform are obtained and analysed.
在这个计算中，采用了流体——弹塑性变模量模型，使用了拉格朗日坐标有限差分方法和人造粘性，获得了冲击波、空腔和波形参数，并分析了这些参数。
To eliminate the residual stress of aluminum alloy pre-stretching board, an elastic-plastic finite element model was developed to simulate the vibratory stress relief (VSR) process.
为消除铝合金预拉伸板中的残余应力，采用弹塑性有限元法对振动时效消除残余应力进行数值模拟。
By introducing the viscoelastic deformation into the unified constitutive model a Visco-elastic-plastic unified constitutive model is created.
将粘弹性变形引入到统一本构模型中，进而建立了粘弹塑性统一本构模型。
The simplified mechanical model and three-dimensional elastic-plastic finite element models was found to analyze the reliability of sewage settling tanks equipped with scraping sludge machine.
针对旧污水沉降罐在安装刮泥机后的受力可靠性问题，建立了简化力学模型和三维弹塑性有限元模型。
Based on Biot consolidation theory, combined with a certain project, a three-dimensional elastic -plastic FEM model is established, the process of soil consolidation is simulated.
基于比奥固结理论，结合某沿海围垦工程，建立了三维弹塑性有限元模型，模拟了土体固结过程。
A quasi static approach is presented for ductile tearing test of double cantilever beam specimen by using the model of elastic beam on elaso plastic foundation.
对典型结构钢的双悬臂梁试件的中低速韧性撕裂的实验进行了准静态模拟。
By introducing the viscoelastic deformation into the unified constitutive model, a new Visco-elastic-plastic unified constitutive model is founded.
将粘弹性变形引入到统一本构模型中，进而建立了粘弹塑性统一本构模型。
Based on the elastic-plastic dynamic model of the thin-wall structure aqueduct, the non-linear earthquake response analysis is presented.
运用渡槽薄壁结构弹塑性动力分析模型，开展了渡槽非线性地震响应分析计算。
Stress distribution in the condition of SPT loading, unloading and design pressure reloading was simulated using elastic-plastic finite element model.
利用弹塑性有限元模型模拟多层圆筒在超压处理压力下，卸载后以及重新加载设计压力时的应力分布。
The respective linear and nonlinear model parameters are determined according to these isochrones' elastic-plastic deformation segment.
分别根据该曲线的弹、塑性变形段确定相应的线性、非线性模型参数。
The Cam-clay model has widely been used in the last decades which described the main features of soil elastic-plastic stress-strain relationship.
著名的剑桥模型描述了土的塑性本构关系，在提出的几十年中已得到广泛的应用。
The analysis model, including process chain, geometry of the die, the elastic-plastic finite-element is built according to the practical process.
从挤压成形齿轮的制造工艺链出发，建立了精确模拟分析的工艺过程模型、几何模型、弹塑性有限元模型。
The analysis model, including process chain, geometry of the die, the elastic-plastic finite-element is built according to the practical process.
从挤压成形齿轮的制造工艺链出发，建立了精确模拟分析的工艺过程模型、几何模型、弹塑性有限元模型。
应用推荐