The effect of reaction temperature of the formation on thioether dianhydride monomer was discussed.
讨论了温度对硫醚二酐形成的影响。
The effect of reaction temperature, HF and rare earth concentrations on the yields of rare earth were studied.
考察了HF用量、稀土浓度、反应温度对稀土收率的影响。
And the effect of reaction temperature, catalyst varieties and monomer components on the reaction and properties of the product were discussed.
分析讨论了反应温度、催化剂种类、原料组成和配比等对反应过程及产品主要性能的影响。
Effect of reaction temperature on coking deactivation of a modified HY zeolite catalyst for alkylation of benzene with propylene was investigated.
研究了丙烯与苯反应中反应温度对改性Y沸石催化剂失活的影响。
CO hydrogenation catalyzed in heterogeneous system by supported bimetallic cluster has been studied in the light of the effect of reaction temperature, time and support.
本文评价了负载型双金属簇催化剂的多相CO加氢反应，考察了反应温度、时间及担体对CO加氢反应催化活性和产物分布的影响。
The effect of reaction temperature on reaction activity and selectivity of dimethyl dichlorosilane (DDS) in direct synthesis process has been investigated experimentally.
实验研究了直接法流化床合成甲基氯硅烷过程中反应温度对反应活性和二甲基二氯硅烷(DDS)选择性的影响。
The nickel distribution of residue feedstock and products obtained from fixed bed reactor were studied and focused on the effect of reaction temperature and various hydrotreating catalysts.
对混合渣油及其经固定床加氢处理后生成油的镍分布进行了研究，考察反应温度和加氢处理催化剂对油样中镍分布的影响。
The dominant reaction pathways and the effect of reaction temperature and type of zeolites on the yield and selectivity of benzene formed during catalytic cracking of cumene were investigated.
在催化裂化反应条件下，研究了异丙苯主要裂化反应路径以及反应过程中反应温度和分子筛类型对苯产率和选择性的影响规律。
The effect of reaction temperature, reaction pressure, catalyst concentration, ammonia circulation rate, condensing temperature on fatty nitriles reaction rate, yield, energy demand are discussed.
讨论反应温度、反应压力、催化剂的浓度、氨循环速率、冷凝温度对脂肪晴的反应速率、得率、能量消耗的影响。
Using supercritical water oxidation process to treat RDX wastewater, the influences of reaction temperature, time and pressure on the treatment effect were discussed.
用超临界水氧化法处理黑索今(rdx)废水进行了试验研究，探讨了反应温度、时间和压力等因素对处理效果的影响。
In this paper the effect of sucrose concentration and reaction temperature on the sucrose hydrolysis were studied.
考察了蔗糖水溶液的浓度及反应温度对蔗糖水解反应的影响。
Influences of immersion time of film in the solution of initiator, monomer concentration, reaction temperature and UV irradiation time on grafting effect are studied.
研究了膜在光引发剂溶液中的浸泡时间、单体溶液的浓度、反应温度和紫外光照射时间等对接枝效果的影响。
The Effect of sparking energy, reaction temperature and electrode distance on the powder size, shape and yield was investigated.
研究了脉冲能量、反应温度和电极间距等工艺因素对镍磷合金粉体尺寸、形貌及收得率的影响。
The effect of molar ratio of monomers, swelling temperature and time, reaction time and pressure on the grafting density are discussed.
探讨了双组分单体的摩尔比，溶胀温度和时间，反应压力和时间等对接枝率的影响。
While the effect of reaction time on the degree of grafting differs during various temperature period.
反应时间对接枝率的影响在低、高温阶段有所不同。
The effect of monomer ratio, initiator amount and reaction temperature on performance of builder detergent are studied.
研究了单体配比、发剂用量、合反应温度对助洗性能的影响。
The concentration of emulsifier and the reaction temperature is the main factor to effect the performance of product.
乳化剂的浓度和反应温度是影响产品性能的主要因素。
This paper established a fast measuring way of peroxide value of oxidized wax and the effect of solvent, measuring temperature, reaction time on the measuring results were discussed.
建立了一种氧化蜡过氧化价的快速测定方法，考察了溶剂、测定温度、反应时间对测定结果的影响。
Effect of temperature on gasoline olefins cracking reaction over acid catalysts in fixed fluidized bed(FFB)reactor was studied and 1-heptene was used as model compound.
以1-庚烯为模型化合物，在小型固定流化床上研究了反应温度对汽油烯烃在酸性催化剂上反应的影响。
The results of cross-cut test indicated that the higher reaction temperature, the longer reaction time and proper coupling agent consumption were favorable to obtain better coupling effect.
正交试验结果显示较高的反应温度、较长的反应时间、适当的偶联剂用量有利于得到较好的偶联效果。
The effect of the ratio of material and temperature were studied, and the best reaction conditions was determined.
考察了原料配比、温度等因素对反应的影响，得出最佳反应条件。
The effect of ratio of the raw materials, temperature of the reaction, time of the reaction and product treatment on yield were studied.
考察了反应中的物料配比、反应温度、反应时间以及产物处理等因素对产率的影响。
The effect of addition manners of reactants, reactant ratio, catalyst types, and reaction temperature, etc on the viscosity of PUA was studied in detail.
详细研究了加料方式、反应物配比、催化剂、反应温度等因素对PUA黏度的影响。
The effect of catalyst, reaction temperature, reaction pressure on conversion and purity of isobutal vinyl ether was discussed.
讨论了催化剂、反应温度、反应压力等对产率与纯度的影响。
The effect of acid-alcohol ratio, acidity of catalyst, amount of catalyst, reaction time, and reaction temperature were investigated.
考察了醇酸比，催化剂酸度，催化剂用量，反应时间，反应温度对酯化产率的影响。
Some influences of steric effect, reaction temperature and solvent effects were discussed.
并简单讨论了立体效应，反应温度和溶剂效应对此还原反应的影响。
The effect of catalyst and temperature on the reaction were studied.
研究了催化剂和反应温度等因素对反应的影响。
The effect of vitriol excess coefficient, reaction temperature and reaction time on the leaching ratio has been studied.
其次是硫酸浸取，研究了硫酸过量系数、酸浸温度和酸浸时间对铁的浸出率的影响。
The effect of modified resin, reaction temperature, reaction time on the solubility of resin and antirust property of the film have been discussed.
讨论了改性树脂、反应温度和反应时间等因素对树脂水溶性和涂层防锈性能的影响。
The effect of modified resin, reaction temperature, reaction time on the solubility of resin and antirust property of the film have been discussed.
讨论了改性树脂、反应温度和反应时间等因素对树脂水溶性和涂层防锈性能的影响。
应用推荐