The software is tested well in many processsimulations such as the realtime dynamic process simulation of a TDI plant, and shows it is reliable and practical.
应用于某TDI装置动态流程模拟项目的实践、检验，证明了该算法的可靠性和实用性。
The dynamic analysis is done on the output from the simulation process based on the output logs or the events.
动态的分析是由基于输出日志或事件的模拟流程的输出过程来完成的。
For this, Modeler provides a powerful simulation engine to help, along with both dynamic and static reports for defining a future state (to-be) process.
为此，Modeler提供了功能强大的模拟引擎以提供帮助，同时提供了同于定义将来状态(预期)的流程的动态和静态报告。
The simulation USES these metrics to understand the dynamic behavior of the business process.
模拟功能使用这些度量标准来了解业务流程的动态行为。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
A self-adaptable dynamic matrix control algorithm for the control of water disinfecting process is presented. Simulation shows that the algorithm is strong in robustness.
本文提出用自适应动态矩阵控制算法对水消毒过程进行控制。仿真结果表明，算法有较强的鲁棒性。
In this paper two contents are studied: the data library of mold standard parts, dynamic simulation of the punching process and the mold's mechanical-electrolytic polishing.
本文进行了模具标准件数据库、冲压过程动态仿真和模具的机械电解复合抛光技术两方面内容的研究。
The method of abnormally high pressure gas well production dynamic simulation not only changes shortcomings of the traditional physics simulation, which have high cost and the complex process, .
异常高压气井生产动态仿真方法不仅改变了传统物理仿真成本高、过程复杂的缺点，而且具备了计算机仿真模拟的准确性。
This paper briefly introduces the methods and results of experimental study and dynamic simulation of start-up process for household refrigerator.
本文简要介绍了家用电冰箱制冷系统启动过程的试验研究与动态模拟分析方法及其结果。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Among three projects, the hydraulic pressure loop is designed and the dynamic simulation for piston reclaiming process is performed with MATLAB program.
就三种回收方案中，对液压回收方案的液压回路进行了设计，并用MATLAB程序对活塞回收过程进行了动态仿真。
Simulation results demonstrate that the approach can react to the change of situation rapidly and effectively, and be advantageous in solving the dynamic task allocation during the operation process.
仿真实验结果表明，基于协商的分布式任务分配方法能够快速有效地实现对态势变化的反应，对于解决作战过程中的动态任务分配具有突出优势。
A dynamic analysis method using simulation technology for intermittent rotary sheet transfer mechanism was put forward. The process of mechanics simulation based on SIMULINK was introduced.
提出了运用仿真技术对间歇旋转式造纸机构进行动力学分析的方法，介绍了在SIMULINK下的机构仿真过程。
Making use of computational fluid dynamics method and dynamic simulation, the thesis studies the effects of jet flow on launch process of vehicular container-type missile.
结合流场计算和发射动力学仿真，研究某型车载发射系统中燃气流对发射过程的影响。
The author evaluated the output voltage drop owing to the commutative process and armature reaction in detail by means of the analysis of the existent system and the dynamic simulation experiments.
作者通过对实际系统的分析和动态模拟试验的验证，对其由于换相及电枢反应引起的输出电压降低作了较为详尽的、定量的分析。
A working process simulation model was established in accordance with the dynamic process of reciprocating compressor and the valve dynamic equations.
根据活塞压缩机的工作过程和阀片的运动方程建立了其工作的模拟模型。
The simulation of grinding process based on the measured topography was also performed, which revealed the percentage of effective grains and the dynamic change of effective grains' number.
在表面形貌测量结果的基础上，对磨削过程进行了仿真，可以得到有效磨粒数占磨粒总数的比例，以及有效磨粒数在磨削过程中的动态变化过程。
Numerical simulation in one-dimensional unsteady flow of thermal dynamic cycle process in PDE is presented by the characteristic method.
对脉冲爆震发动机的热力循环过程应用特征线法作了一维流场的数值模拟。
Segmentation method using decomposition the movement of the piston and the inner gas dynamic process of the impactor, and it detail and demonstrate simulation assumptions of the impactor.
采用分段法将活塞的运动过程和冲击器内部气体动力过程分解，详细阐述和论证了冲击器仿真计算的假设条件。
Utilizing the recorded fault data to replay the transient process, the dynamic load model could be verified by the comparison between measured curves and simulation ones.
利用故障录波信息重演负荷特性的暂态过程，通过实测曲线和负荷模型仿真曲线的比较，进行负荷动特性模型的校验。
The digital simulation shows that the model can describe the dynamic process of the deaerator accurately, and can be used for the simulation and control of power plant.
数字仿真结果表明，所建模型能正确反映除氧器在不同工况时的动态特性，可以用于火电站数字仿真、现场运行控制以及研究除氧器特性等方面。
The smoke flow of the model is simulated and the dynamic simulation display the process of fire smoke flow vividly.
对整个模型的烟流流动作了动态模拟，形象直观地显示了火灾过程烟流流动情况。
Based on the above purposes, a NC milling simulation system oriented to test and teaching has been developed; it achieves a dynamic simulation of the machining process.
基于上述目标，本文开发了一款面向培训、试验的曲面数控铣削仿真系统，实现了加工过程动态仿真。
The simulation results showed that the dynamic transferred curves were in correspondence with the process operation data, so that the simulation model was proven to be reliable.
仿真结果表明该模型在稳态工况下模拟结果及动态过渡过程曲线均与工厂操作数据吻合，仿真模型可靠。
The modeling principle of the proposed active power filter is analyzed. The dynamic diagram of the model is achieved by means of simulation and the convergence process of the system is analyzed.
对此有源滤波器的建模原理进行了分析，通过仿真建立了模型的动态曲线，在此基础上对系统的收敛过程作了分析研究，仿真和实验结果验证了理论分析的正确性。
For the effective control of wastewater biotreatment process, the process simulation should be firstly carried out to analyze the dynamic characteristics of the process.
为了对污水生物处理过程进行有效的控制，首先要对该过程进行模拟以分析其动态特性。
A technical concept, "reverse source quantity", based on artificial neural network, has been pointed out in order to carry out a numerical dynamic simulation on hydrocarbon diffusion process.
前言：提出实现烃类重气泄散态势的动态过程数值预测新构想———基于人工神经网络的“反求源”技术。
The simulation results show: the excitation controlling system has the high stability and voltage regulation precision, fast dynamic process response and better adaptability to practical production.
仿真结果表明，该励磁控制系统同时具有较高系统稳定性和电压调节精度，并且动态过程响应快，能更好地适应生产实际的需要。
Drawbead model has been applied to the dynamic explicit FEM analysis of sheet metal forming process and the simulation of deep drawing of rectangular viewfinder of automobile headlight been realized.
将拉延筋模型引入到板料成形动力显式有限元分析中，并以汽车前照灯矩形反光镜为应用实例，对其拉延成形过程进行了模拟。
A dynamic simulation model of start-up process including fuel pumped section and the dynamic nozzle valve lever, etc. is established for the torpedo thermal power system with pressure adjustment mode.
文中针对使用燃料压力调节供应方式的热动力系统，建立了包括充填集液腔和喷嘴阀杆运动等启动过程动态仿真模型；
应用推荐