Tiejingfen, Mission ball sinter, processing, distribution steel.
铁精粉、团球烧结、加工、经销钢材。
A kind of simulating set was put forth to measure the cathode protection potential and its distribution of offshore steel structures in lab.
研究设计了试验室测量海水中金属结构物阴极保护电位及其分布的模拟装置。
The potential and its distribution of a steel pipe protected by a sacrificial anode were measured through this set and the result was satisfactory.
利用该装置在试验室测量了牺牲阳极保护下钢管的电位及其分布，获得了满意的结果。
Numerical results also showed that convective transfer of molten steel is the key factor to influence the inclusion distribution.
数值结果还表明钢液的对流输运是影响夹杂物分布的重要因素。
Harden tendency of steel, content and distribution of hydrogen in welded joints, restraint stress resistance of joints are three factors that leads to the cold cracks of the welded joints.
钢材的淬硬倾向、焊接接头含氢量及其分布，以及接头所承受的拘束应力状态是产生焊接冷裂纹的三大主要因素。
Therefore, the controlling of the quantity, shape and distribution of inclusion are essential to ameliorate the quality of steel.
因此，减少夹杂物数量并控制其形态和分布是提高连铸坯质量的一项重要任务。
An unreasonable liquid steel flow behaviors have an effect on inclusion flotation, bubble distribution, liquid mold flux fluid capability and spreadability, shell growth, etc.
不合理的钢液流动行为，会影响夹杂物的上浮、气泡的分布、保护渣的熔化及铺展性能、初生坯壳的形成等。
The amount, size and distribution of non-metallic inclusion in different positions of hard wire steel with different diameters were investigated by optical microanalysis.
采用光学显微分析法在不同直径硬线钢的不同部位，分析了非金属夹杂物的数量、大小和分布特征。
An analytical function for describing hardness distribution in round section of quenched steel, known as U-curve, has been established.
建立了描述淬火钢圆形截面硬度分布曲线——U曲线的解析函数表达式。
According to the thermodynamic equations, the laws of ladle lining temperature distribution and the real-time temperature of molten steel in ladle during tapping are calculated.
根据传热学方程，计算了电炉出钢过程钢包炉衬温度分布及钢水温度随时间变化的规律。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
The unevenness of eutectic carbide distribution is one of the important factors that effect the quality of tool steel.
共晶碳化物分布的不均匀性是反映工具钢质量的重要指标之一。
On the basis of theory analysis, it is deduced that the axial stress is linear distribution, when the steel support is loaded by axial force and moment.
根据壳体理论对钢支撑受力机理进行分析和简化计算，得出钢支撑在轴力和弯矩共同作用下，轴向正应力呈线性分布。
This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.
本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。
Introduce a design instance of pressure vessel with nonuniform temperature distribution. The design meets the rules in Item 3.5.2 of GB150-1998 "pressure vessel in Steel".
文章介绍了一例各部分金属温度不同的压力容器的设计，其设计思想符合GB150- 1998《钢制压力容器》中第3.5.2条的规定。
Combined with the distribution rules of steel fiber in spun-cast concrete, the test results are analyzed.
结合离心成型钢纤维混凝土构件的纤维分布规律，对上述试验结果进行了分析讨论。
The dissolution, precipitation and distribution of vanadium in rail steel are introduced in this paper, effect of vanadium on the microstructure and properties of rail steel is also analyze.
介绍了钒在钢轨钢中溶解、析出、分布情况，分析了钒对钢轨钢组织结构及对钢轨钢性能的影响。
The aim of steel wire straightening is to maximally eliminate steel wire's extra internal stress caused by uneven deformation or uneven temperature distribution in production.
钢丝矫直的目的是最大限度地消除钢丝生产过程中由于变形或温度分布不均造成附加内应力。
An optimal design method that can control stress distribution of pressure vessel by controlling prestress of steel ribbon of Flat steel ribbon Wound pressure vessel (FSRWPV) is given out.
提出了通过控制扁平绕带压力容器钢带预应力来控制容器筒体应力分布的寻优设计法。
In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
研究了合金化变质改性对提高奥氏体锰钢基体碳含量，改变析出碳化物形态及分布的影响。
The reasons for different mode of welding residual stress distribution and influence of flame curving on steel structure are discussed.
简要阐明了造成不同焊缝应力分布的原因及火工校弯成形工艺对构件残余应力分布的影响。
Using this interferometer, the vibration amplitude distribution of a stainless steel sample with a rough surface have been measured.
用这个干涉仪测量了一个有粗糙表面的不锈钢片的振动振幅分布。
The stainless steel powder becomes finer and the size distribution is narrower with the mass flow rate and pressure of gas medium increasing.
随着气体介质流量及压力的增加，所制备的不锈钢粉末粒度越小，粉末的分布更集中；
Thermal simulating technology was adopted to study grain size and the precipitates distribution of CGHAZ for X80 pipeline steel with different welding condition.
采用热模拟技术研究了X80管线钢在不同焊接热循环条件下晶粒及第二相粒子的变化。
The effects of change in microstructure and residual stress distribution on Barkhausen noise (BN) on the bainitic steel side in a welded bainitic and austenitic steel pipe are studied.
研究了焊接贝氏体-奥氏体钢管贝氏体钢侧显微组织变化和残余应力分布对巴克豪森噪声（BN）的影响。
The effects of change in microstructure and residual stress distribution on Barkhausen noise (BN) on the bainitic steel side in a welded bainitic and austenitic steel pipe are studied.
研究了焊接贝氏体-奥氏体钢管贝氏体钢侧显微组织变化和残余应力分布对巴克豪森噪声（BN）的影响。
应用推荐