• Results show that dimensional precision and surface quality are fine.

    研究结果表明,其尺寸精度表面质量良好

    www.dictall.com

  • The process flow of rapid casting technology based on RP for metal molds and main error factors influencing mold's dimensional precision were introduced.

    介绍基于快速成型技术快速铸造金属模具工艺流程影响模具尺寸精度主要误差因素

    www.chemyq.com

  • Straight bevel gears used in car differential have strict requirements for dimensional precision and quality, it is difficult to form accurately them by the traditional forging techniques.

    轿车上的齿圆锥齿轮尺寸精度产品质量要求很高,难以采用常规塑性加工技术成形

    dict.cnki.net

  • The rapid product processing is introduced by taking an example of polyurethane product and the products' dimensional precision and processing cycle and cost analyzed.

    聚氨酯制品介绍了制品快速加工实验过程制品尺寸精度加工时间加工成本进行了分析

    dict.cnki.net

  • Removing Mullite by a little processing after microarc oxidation, the valid coating of good property can be retained well and the dimensional precision of part can be guaranteed, too.

    氧化后经微量磨抛加工除去莫来石,既充分保留性能优异有效保证零件尺寸精度

    dict.cnki.net

  • Three working procedures of injection, debinding and sintering all influence dimensional precision of the compacts.

    注射成形获得最终样品尺寸精度注射脱脂烧结工序影响

    dict.cnki.net

  • It is difficult to gain homogeneous coating when precision small holes are electroplated chrome, which affects the dimensional precision and the form precision of the product.

    精密小孔硬铬很难获得均匀镀层直接影响产品尺寸精度位精度

    www.dictall.com

  • The dimensional precision and standard of plastic product and difference between plastic shrinking featured value and shrinkage were described.

    介绍塑料件尺寸精度塑料件尺寸公差标准,以及塑料收缩特性收缩率区别计算方法。

    www.chemyq.com

  • The factors influencing the dimensional precision and properties have been analysed, and the proposals for further improvement and development of the technology are given.

    同时分析影响产品尺寸精度性能因素提出改进措施发展方向。

    dict.cnki.net

  • An auto-focusing sensor is used for the measurement of the depth of laser ablation to improve its dimensional precision.

    提高激光加工尺寸精度,将聚焦测量应用激光加工的深度测量

    dict.cnki.net

  • The application shows that the wearing plate manufactured by liquid forging process features high dimensional precision and low surface roughness, and performs well.

    实践证明液态模锻工艺生产耐磨衬尺寸精度高,零件表面粗糙度值使用效果优良

    www.chemyq.com

  • The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.

    弯曲度的调整采用助力手轮计数器操作简单保证质量尺寸精度

    www.518ad.com

  • Roller is one of the major process equipment for the flow forming. It has a significant effect to dimensional precision and apparent quality of the flow formed part.

    旋压加工中的关键工艺装备之一旋压工件的尺寸精度表观质量至关重要作用

    www.chemyq.com

  • Therefore, not only have a rather high standard been set for dimensional precision and geometrical precision of them, but also certain demands are made against theirs stiffness characteristic.

    因此加工过程中不仅尺寸精度几何形状精度提出很高要求而且刚度特性提出了一定要求

    www.fabiao.net

  • The deflection of injection products influences final shape and dimensional precision.

    制品变形影响产品最终形状尺寸精度

    www.iciba.com

  • Wooden earlap is our new product, which has high dimensional precision and exquisite appearance.

    本厂现阶段开发的产品木制壳,产品具有尺寸精度外观处理精致等优点。

    www.shengyidi.com

  • Further, by stabilizing the processing margin by employing a grindstone 4 made of resin, variations in the dimensional precision in the individual glass substrates can be minimized.

    通过试样树脂构成磨石4可以稳定加工边界可以使单独玻璃基片尺寸精度变化最小

    www.gongye168.com

  • This allows a cavity of higher dimensional precision to be buried therein.

    由此尺寸精度空腔

    www.dianzi518.com

  • High dimensional precision of castings and stable geometrical dimension;

    铸件尺寸精度尺寸稳定

    www.f557.com

  • In multi pass hot bar rolling, there are many complicated influences which may affect the final dimensional precision and mechanical properties.

    棒材热连轧生产过程中,影响产品最终尺寸精度性能的因素较多

    dict.cnki.net

  • In grinding process, the dimensional precision of work piece shows its uncertainty and non-linearity because of the machine tool property, the grinding wheel, the clamp, etc.

    磨削加工机床砂轮工件夹具等众多因素影响,加工工件尺寸精度精度一致性呈现不确定性严重非线性

    www.chemyq.com

  • Based on the results, expanding-ratio is important to dimensional precision of finished products.

    结果表明影响制品横断面尺寸精度一个主要因素。

    www.chemyq.com

  • Continuing the gradual wear and tear will cause damage to the bearing parts, and eventually lead to loss of dimensional precision bearings and other related issues.

    持续磨损引起轴承零件逐渐损坏最终导致轴承尺寸精度丧失其它相关问题

    www.gzwoen.com

  • Understanding the ono-column volume change due to reduction is a key factor to avoid central porosity cracks, improve the dimensional precision, and promote the application of skew rolling.

    轧制过程中,轧制直径压缩产生体积大小对解释心部疏松原因提高尺寸精度扩大技术应用具有重要意义。

    dict.cnki.net

  • In order to obtain dimensional precision of wax Patterns and castings, a special fixture has been designed and Produced for correcting and assembling wax patterns.

    设计制造专用蜡模熔合校正夹具保证模组铸件尺寸精度

    dict.cnki.net

  • The invention improves the dimensional precision of cold-rolled steel strip products and improves the automatic degree in the production process;

    发明提 高冷轧带钢产品尺寸精度提高生产过程中的自动化程度

    ip.com

  • The factors and principles to establish evaluation criteria are put forward. The criteria of appearance defects, dimensional precision, weight range and process parameters are set up.

    提出建立评价尺度应考虑的因素评价指标选取原则建立外观缺陷尺度精度、件范围过程变量评价尺度。

    www.chemyq.com

  • At last, a three-dimensional high precision measuring method for stockpiles volume and elevation is presented by using camera network based on projection contour line.

    投影轮廓线辅助进行多部机组,用于对大型堆场三维形貌、料堆体积高程等的高精度测量等。

    sylx.ustc.edu.cn

  • At last, a three-dimensional high precision measuring method for stockpiles volume and elevation is presented by using camera network based on projection contour line.

    投影轮廓线辅助进行多部机组,用于对大型堆场三维形貌、料堆体积高程等的高精度测量等。

    sylx.ustc.edu.cn

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定