• To improve the trace precision of the servo system in some tracking set, the text adopts the computer aided control techniques based on digital forecast and filter.

    本文提高跟踪装置伺服系统跟踪精度为主要目标,采取基于数字预测滤波计算机辅助控制技术

    youdao

  • A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.

    介绍一种新型螺旋桨特性负载模拟装置数字控制直流转伺服系统采用转矩电流双闭环控制方式

    youdao

  • An analog compound orthogonal neural network was presented on the basis of the digital compound orthogonal neural network and was applied in the control of the servo system with nonlinearity.

    数字复合正交神经网络基础提出一种模拟复合正交神经网络,用于非线性伺服系统控制

    youdao

  • Aiming at the poor web uniformity of non-woven fabrics produced by traditional cross lapper, the motion control bus SERCOS is applied in the digital servo system of the W1251 cross lapper.

    针对传统交叉生产非织造布棉网均匀度较差等问题,运动控制总线sercos应用W1251交叉铺网机数字伺服系统

    youdao

  • A kind of comprehensive experimental instrument, which is combined by a digital computer, an analog computer and an electric driving servo system, was proposed for automatic control teaching.

    开发了一集合数字计算机模拟计算机电动伺服控制系统面向自动控制类课程综合教学实验仪器

    youdao

  • It is digital servo timing control system which is driven by PWM, direct current moment motor.

    采用了脉冲调宽功放装置(PWM),直流力矩马达直接驱动转台框架的数字伺服调速体制

    youdao

  • The paper analyzes the principle of components of magneto optical disk driver focusing and tracking servo system, then designs and realizes a DSP based digital servo control system.

    分析光盘驱动器聚焦循轨数字伺服系统组成部分原理设计实现了套基于DSP的数字伺服控制系统。

    youdao

  • This paper proposes a servo control system for permanent magnet synchronous machine (PMSM) based on Application Specific Intelligent Power Module (ASIPM) and Digital Signal Processor (DSP).

    文章提出了采用种新型专用智能功率模块ASIPM结合数字信号处理器DSP开发的永磁同步电动机伺服控制系统

    youdao

  • The motion control of stepping motor in the servo system is investigated and a motion control module based on digital signal processor is designed.

    介绍有关步进电机伺服运动控制,设计了基于数字信号处理器的运动控制系统

    youdao

  • Because of the essence of this control system is to complete servo cylinder test, we adopted many control strategies, and the design of digital controller of computer is the main research object.

    因为试验台控制系统本质为了进行伺服试验所以我们针对该系统应用了多种控制策略,其中计算机控制系统的数字控制器设计是本文研究的重点内容。

    youdao

  • The system proposes the application of a closed loop position servo control and sets up a model and algorithm of er ror tracing and digital feedback.

    系统提出采用闭环位置伺服控制建立跟随误差数字反馈模型算法

    youdao

  • Aimed at a kind of wing control system, a software method that digital control hydraulic servo circuits were calibrated was proposed to improve system's reliability and maintainability.

    课题舵机控制器为研究对象,设计了一种数字控制液压伺服回路校准软件实现方法提高系统可靠性可维护性。

    youdao

  • The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.

    论述了以数字控制器DMC300A核心数字式交流伺服系统硬件软件设计,对设计过程中所涉及重要参数给出了设定方法

    youdao

  • This article deals with the realization of a rapid position control of the digital servo system through double mode control.

    本文研究控制实现数字位置随动系统快速控制。

    youdao

  • SERCOS digital servo control system bus interface design and development of high research value and practical value.

    数字伺服控制系统SERCOS总线接口设计开发具有很高的研究价值实用价值。

    youdao

  • A pneumatic servo loading system was proposed and a specially designed pneumatic digital servo valve was introduced in the system for the purpose of precise control.

    为了达到这一要求,提出气动伺服加载系统并引入特殊设计的气动数字伺服

    youdao

  • In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.

    济钢ASP1700薄板坯连铸连轧项目中,连铸机结晶系统采用了新型数字交流伺服控制系统,代表当今世界最先进控制水平。

    youdao

  • In this paper a high performance digital servo control system for permanent magnet synchronous motor is studied.

    研究了一种高性能全数字永磁同步伺服系统

    youdao

  • It analyzes the digital servo control system to control the process, structure, hardware and software implementations.

    分析数字舵机控制系统白勺控制过程构造组成硬件软件实现方案。

    youdao

  • Because of the need of the digital control in the Angle servo control system, it is necessary to improve the traditional Angle servo control system.

    随着位置伺服控制系统数字化需求,必须传统角位置伺服控制系统进行改进

    youdao

  • A basic frame of direct current pulse width mode of servo control system is presented. Algorithm is realized by embedded digital signal processor.

    提出一种直流调制伺服控制系统基本框架其算法通过嵌入式数字信号处理器(DSP)来实现

    youdao

  • In this paper, a high performance digital servo-system based on an industrial control computer is studied.

    本文研究了一种以工控机作为控制计算机高性能数字伺服系统。

    youdao

  • The subject is of far reaching importance to research of digital tubular PMLSM servo control system, and it also has reference value to research of other linear digital servo control system.

    课题数字化圆筒型永磁直线同步电机伺服控制系统研究具有重要意义,对其他直线电机的数字化伺服控制系统的研究一定的参考价值

    youdao

  • A new design problem in digital servo control system for structural characteristics of multi-joint robot and motion control features is studied.

    分析一种新型数字舵机控制系统白勺设计问题

    youdao

  • Digital AC-Servo control system is used to increase speed stability, adjust-ranges, automatization, measurement-precision, at the same time the system has some self-diagnose functions.

    采用数字式交流伺服控制系统控制动横梁速度,使系统额速度稳定性、调节范围、自动化程度和测量精度都大幅的提高,且具有一定的自诊断功能。

    youdao

  • Grounded on the work above, a high performance full digital PM AC servo system based on the TMS320F240 is developed, and its monitor control system designed.

    上述工作基础上,研制开发了一套基于TMS320F240高性能数字永磁交流伺服系统设计开发了相应的上位机监控软件

    youdao

  • Secondly, the control of position loop was improved by using compound control with velocity and acceleration feed-forward control and digital notch filter control in feeding servo system.

    其次位置控制进行了改进,将位置前馈改进为速度前馈加速度前馈,前向通路中增加了一个数字滤波器组成复合运动控制器。

    youdao

  • A pneumatic servo loading system is proposed and a specially designed pneumatic digital servo valve is introduced in the system for the purpose of precise control.

    为了达到这一要求,提出气动伺服加载系统引入特殊设计的气动数字伺服。同时气动伺服加载系统进行数学建和模块化分析,最后进行了实验研究。

    youdao

  • This paper presents the application of a full-digital AC-servo driver to an automatic cutting control system for aluminium plastic tubes.

    本文主要介绍了全数字式交流伺服驱动器铝塑自动切割控制系统中的应用

    youdao

  • This paper introduces a digital servo control system for permanent magnet synchronous motor.

    介绍一种高性能的永磁同步电动机为执行元件的全数字化伺服驱动器。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定