About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
Armor C12 convertible notebook has a die-cast magnesium alloy case, and has been tested for drop-shock, moisture, temperature extremes, and resistance to dust and vibration.
ArmorC12 convertible笔记本电脑具有印模压铸的镁合金外壳，已经通过了跌落冲击、潮湿、极端温度与防尘和抗振动测试。
Made by mixing elemental or alloy powders and compacting the mixture in a die, the resultant shapes are then sintered or heated in a controlled atmosphere furnace.
通过混合元素或合金粉末并在模具中压实混合物，再烧结或在环境可控炉内加热制成最终形状。
Though the analyzing of the upper part of oil box and the designing of the structure of the die, the article discusses the characters and advantage of the low melting point alloy die.
以分析起重机油箱上体工艺特性和设计其低熔点合金拉深模具结构为例，论述了低熔点合金冲压模具的结构特点及优势。
Die cast zinc alloy valve body.
锌合金压铸阀体。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型，强度高，表面高压静电粉末喷涂，耐腐蚀。
The well balanced zinc - alloy die cast body ensures reliable performance in even the most demanding applications.
在均衡的锌合金压铸件，确保即使在最苛刻的应用，性能可靠。
The frequent faults in formed blanking die of Zn-based alloy was introduced. And some methods to solve the faults were put forward.
介绍了用锌基合金材料制作的冲裁模具成型后常见的缺陷，并提出了相应的解决办法。
The article introduces the method of superhardening treating hard alloy drawing die core with thermochemistry copermeation method so as to improve its surface hardness.
介绍采用热化学共渗法对硬质合金拉丝模芯进行超硬化处理，以提高其表面硬度的方法。
Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.
公司下设有模具、注塑、五金、铝合金压铸等配套厂。
The SEM observation shows that thermal fatigue is the major cause of the failure of the steel hard alloy die.
电镜观察显示热疲劳是硬质合金热挤压模具失效的主要原因。
Controlling deformation and flow of semisolid alloy slurry is the key of die casting of semisolid alloy.
半固态合金挤压工艺的关键是控制半固态合金坯料的流动和变形。
The billets with uniformly distributed microstructure in rheo-casting are beneficial to obtaining the A356 alloy die castings with perfect quality.
流变压铸试片的组织分布很均匀，利于获得高质量的半固态a 356合金压铸件。
The structure parameters and size design of die used for extruding aluminium alloy large size profiles are analysed.
大型材挤压模具设计与制造是现代车辆大型铝合金型材生产的关键技术。
The improved process of drawing die of aluminium alloy, and the processing characters of improved manufacture technology and its feasibility and advantages are stated respectively.
介绍了铝合金拉伸模加工工艺的改进方法、改进后加工工艺的加工特点及其可行性、优越性。
Keypoints for quality control in electroplating of zinc alloy die castings are described, with stresses on the involved considerations during die designing, casting and plating pretreatment.
论述了锌压铸件电镀质量控制的要点，特别指出了模具设计、压铸及预处理等步骤中应考虑的一些问题。
Many Al or Mg alloy die castings, such as the auto wheel, the brake cylinder, the hydraulic valve, the actuator body and the heat exchanger, have been produced.
充氧压铸已在铝合金、镁合金压铸件的生产中得到应用，如车轮、制动器缸体、液压传动阀体以及热交换器等。
Failure analysis of parietal cracking in scavenging pump made of die casting aluminium alloy was carried out by means of metallographic examination, SEM analysis and so on.
借助金相显微镜、扫描电镜等分析手段，对压铸铝合金清洗泵腔壁断裂失效的原因进行了分析。
The die construction, running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.
阐述了金属型铸造摩托车铝合金整体车轮的模具结构、工作原理及特点、铸造工艺流程、工艺参数及产品性能。
Automotive sealing strip, sealing strip trains, heating duct, EPDM tape, rubber accessories, plastic products, such as aluminum alloy die castings.
汽车密封条、火车密封条、采暖风管、三元乙丙胶条、橡胶配件、塑料制品、铝合金压铸件等。
Through analyzing on the forming process of powder alloy brake lining, the principle of shaving and die structure of powder alloy brake lining were introduced.
通过对刹车片钢背的工艺分析，介绍了整修的工作原理和刹车片整修模具的结构。
An evaluation system for the surface quality of magnesium alloy die castings was established based on an automobile cylinder head cover component.
建立了一套汽车发动机缸盖罩盖镁合金压铸件外观质量的评定系统。
The article discusses causes and eliminated measures of aluminium alloy die forgings crassitude crystal from four sides of component, technical parameter, temper of die and heat treatment.
从锻件的材质、锻造工艺参数、锻模温度、热处理工艺参数四个方面，阐述了铝合金模锻件粗晶缺陷的产生原因及消除措施。
Different influence of Sr modification with different parameters by analyzing metallographic structure on properties of die casting al alloy is studied.
通过金相组织分析以及在不同参数下以锶变质对压铸铝合金性能带来的各种影响进行了试验。
A new kind of non-cyanide alkaline strike copper plating process for zinc alloy die-castings was developed in order to solve the problems in traditional non-cyanide strike copper plating.
为解决传统的锌压铸件无氰预镀铜存在的一些问题，提出了一种新的锌合金压铸件无氰碱性预镀铜工艺。
The results show that the series high temperature creep resistance die casting magnesium alloy has potential to make power-train parts with decrease of the weight greatly.
试验结果表明，所开发的抗蠕变压铸镁合金具有应用于汽车动力系统部件的制造并大幅度减轻重量的潜力。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
应用推荐