To design voltage reference and comparator with high performance is a long-term pursuit of analogy IC designers.
设计高性能的基准电压源和比较器是模拟电路工程师一直努力的目标。
The external cavity quantum cascade laser with this design may operate very stable due to its low dependences on voltage and temperature, he says.
“应用这种设计的外腔式量子级联激光器能够非常稳定地运行，这得益于对电压和温度的弱依赖关系，”他说。
"The external cavity quantum cascade laser with this design may operate very stable due to its low dependences on voltage and temperature," he says.
“应用这种设计的外腔式量子级联激光器能够非常稳定地运行，这得益于对电压和温度的弱依赖关系，”他说。
The novel design of the Flexfet transistor brings many benefits not realized in standard CMOS processes, which enable sub-volt designs and supports continued voltage scaling.
该Flexfet晶体管设计新颖，可以改善标准CMOS工艺中的分伏设计和电压调节等。
It had the same type and number of PV solar panels as the tree design, and the same peak voltage.
这个模型使用与树木布局模型一样、数量相同的PV(光伏)太阳能电池，因此有同样的输出峰值。
The design also includes a drive-by-wire system, which replaces mechanical with electronic systems, and low-voltage lighting technologies like electroluminescent or flexible LED strips.
该设计还包括一个线驱动操纵系统，它以电子系统取代机械流程，使用像电致发光或灵活发光二级管棒这样的低电压照明技术。
Voltage Reference in the design, how to achieve high-precision, low temperature coefficient is a major difficulty.
在基准电压源的设计中，如何实现高精度、低温度系数是一大难点。
Low-power oriented design techniques include selecting low-power parts, low operation voltage, managing clock of MCU or making MCU turn into dormancy, managing power supply of circuit and so on.
低功耗设计的关键技术包括选用低功耗的各类器件，低工作电压，对MCU进行时钟管理或休眠，对各部分电路和器件进行电源管理等。
This paper describes the design of a new type sample latching voltage comparator ZJ03.
本文介绍一种新型的取样锁定电压比较器z J _(03)的设计。
The 800v quasi resonant design with lower current peak and lower drain-source voltage during turning on of the MOSFET demonstrates advantages in conducted EMI spectra regarding the primary side.
拥有更低峰值电流和场效应晶体管漏源极开通电压的800伏特准谐振设计展示出一次侧传导电磁干扰降低的优势。
The article introduce mainly design of catena about withstands voltage tester.
本文主要介绍耐电压测试仪系列的设计。
The carbon block consists of two electrodes spaced so that any voltage above the design level is arced from line to ground.
碳块中有两个彼此间隔的电极，任意高于设计标准的电压都可以跨过电线入地。
For the voltage controlled system model, pole point method is taken to design the PID controller, and good result is achieved.
对于电压控制对象模型，采用极点配置的方法设计PID控制器，均取得了较为满意的控制效果。
Comparing design cathode with wheel profile shape, effects of dressing parameters, wheel profile, dressing voltage and conductance on design cathode profile were studied.
通过设计阴极与砂轮廓形的对比，分析了成形砂轮轮廓形状，修整电压和电解液电导率对设计阴极形状的影响。
Voltage control the voltage control is a rheostat that sets the operating point of the voltage regulator and therefore controls the output voltage of the generator set, within its design limits.
电压控制电压控制是设定电压调整器的运行点从而在设计范围内控制发电机组的输出电压的变阻器。
Otherconsiderations for these critical applications include component package design, working voltage ranges and the advantageous CV levelsof tantalum devices.
这些关键应用所考虑的其它因素包括：元件封装设计、工作电源范围和钽器件优异的电容-电压（CV）特性。
This paper discuss the design of the high voltage distribute network with count and theory.
本设计采用理论和计算相结合的方法讨论高压配电网的设计。
We design a suit of aviation AC excitation generator system, it insures the output voltage is constant frequency and constant voltage.
我们设计了一套航空用交流励磁发电机系统，以保证输出电压恒频恒压。
Design and test of optical voltage transformer.
光学电压互感器的设计和试验。
To achieve high oscillation peaks, the design of the transformer has to be set to high reflected voltage.
要达到比较高的振荡电压峰值，变压器的反射电压必须设置的比较高。
This paper introduces a new pulse modulator which USES VMOSFET as high voltage switch, describes its characteristics, operating principle and circuit design.
本文介绍一种以VMOSFET为高压开关的新型脉冲调制器，叙述其特点、工作原理及电路设计。
This paper presents a practical design of voltage regulator according to the need of the application.
本文根据实际应用中的需要，提出了一种实用的电压调整器的设计。
In part of hardware design, voltage and current sampling circuit, IGBT driving circuit communication and man-machine interface circuit are designed.
在硬件设计中对电压、电流采样电路，IGBT驱动电路以及通讯和人机接口电路进行了设计。
The main characteristics of ADS8344is introduced, and the interface design between ADS8344and TMS320LC545in signal process system of electronic transformer's high-voltage side is given.
文中介绍了ADS8344的主要特点，给出了其在电子式互感器高压侧数据处理系统中与TMS320LC545的接口设计。
This design facilitates voltage control of a transmission bus.
此设计使输电母线易于电压控制。
Feature and operation principle of regulation transformer with multi-magnetic circuit. Its design and property are discussed. The self-contained voltage regulation system is introduced.
论述了多磁路调压变压器的特征与工作原理，探讨了其结构与性能，并对与之配套的调压系统做了介绍。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
Besides, design the voltage data format and analyze the way to improving transfers effect etc.
另外设计了所传送的电压数据格式，分析了提高传送成功率的方法。
Besides, design the voltage data format and analyze the way to improving transfers effect etc.
另外设计了所传送的电压数据格式，分析了提高传送成功率的方法。
应用推荐