Resistance in the gas cylinder scour capability, and always maintain good thick enough oil film.
抗气缸中气体的冲刷能力优良，始终保持足够厚的油膜。
The result indicates that the maximum of dynamical stress intensity factor arrives behind the load time and increases with the size of thick wall cylinder.
结果表明动态应力强度因子的最大值在加载时间上有滞后性现象，它的最大值随厚壁筒尺寸增加而增加。
We study stress intensity factor of thick wall cylinder with cracks under dynamic load.
研究了动载荷作用下带裂纹厚壁筒的应力强度因子。
The study is concerned with perforation of thick woven composite plates by hard steel cylinder.
本文对厚编织复合材料板由硬的钢圆柱弹丸穿孔问题进行了研究。
One method to decrease the peak stress at the joint of nozzle and thick cylinder was introduced in this article.
本文介绍了一种降低厚壁圆筒与接管连接处应力峰值的方法。
Based on the heat conduction theory of thick wall cylinder, the distribution of temperature field in rocks acted by high energy burners was calculated.
以厚壁筒的热传导为模型，研究了高能燃烧剂作用下岩石介质中温度场分布。
For monoblock thick cylinder, the key to get exact developed dimension is to confirm the displacement of interlayer.
对于单层厚壁圆筒体，确定其中性层的位移量是获得正确展开尺寸的关键所在。
The assembling stress appears in combined thick wall cylinder because of assemblage excess.
由于过盈配合组合厚壁筒内会产生装配应力。
This paper presents a new method to calculate the limit load of thick wall cylinder and thick wall spherical shell based on Yus Unified Strength Theory and a Unified solutions are obtained.
采用俞茂宏统一强度理论分析了厚壁圆筒和厚壁球壳的极限荷载，得出了统一解形式。
The validity of computer program is verified and the high efficiency of the proposed algorithm is also demonstrated by the results of a thick cylinder problem subjected to an internal pressure.
文中给出厚壁圆筒蠕变断裂数值算例，计算结果证明了该算法的高效和正确性。
The rhizome is short, thick shape, cylinder, by most imbricate arrangement scaled leaf.
根茎短，粗状，圆柱形，被多数覆瓦状排列的鳞片状的叶。
The result showed that the attenuation of residual stress of autofrettaged thick-walled cylinder reached about 30% under cycle loading.
研究结果表明，厚壁筒自增强残余应力在循环载荷的作用下，残余应力衰减达到近30%。
Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated analytically using a strain gradient plasticity theory.
基于应变梯度塑性理论，分析了内压作用下厚壁圆筒和球壳的塑性极限荷载。
The thin cylinder of upper roller can be adjusted according to your thin & thick fabrics, in order to protect materials and solve the problems of sealing straight of seam kind seam sealing machine.
上压轮气缸采用超薄可调节气缸，可对用户加工厚薄布料进行压力调节，防止压坏布料和压出布边有痕迹，解决了同类机器直压到底的缺陷。
Based on the results obtained from fatigue tests under pulsating internal pressure, the mechanism of dynamic autofrettage of thick wall-cylinder components is studied in this paper.
本文基于脉动内压疲劳试验结果，对厚壁圆筒构件的动态自增强原理进行了分析研究。
Finally, the influences of the intermediate principal stress and the strength-difference on the shakedown limit pressure of the thick-walled cylinder are investigated by the present solution.
最后，利用所得的解研究了材料的中间主应力效应和拉压强度差效应对厚壁圆筒安定极限压力的影响。
Thick with cylinder stroke adjustment to control, can be adjustable.
厚度用气缸调节行程来控制，可随意调节。
The apparatus is used to produce impact internal pressure for the thick wall cylinder in fatigue test.
本文设计了冲击内压循环加载实验装置，该装置能对试件产生连续内压加载。
The superconducting cylinder consists of superconducting thick-film cylinder with narrow crevice and superconducting micro-bridge connected to the former.
超导筒由带狭缝的超导厚膜筒及位于狭缝间并与超导厚膜筒相连的超导微桥组成。
The method is applicable to all cases with known elastic solution. The example of a thick-wall cylinder with uniform internal pressure shows that the method suggested in this paper is reliable.
此方法适用于所有弹性解为已知的情况，由承受均匀内压的厚壁筒的示例可见本文的方法是可靠的。
This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr's yield criterion.
本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析，得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。
The high pressure cylinder of the booster is a thick wall barrel which can bear the high periodic circumferential stress.
增压器高压腔体为承受周期性环向高应力的厚壁筒，在超高压下缸价内径与柱塞外径应变值不同，从而形成工作间隙。
This paper performs the limit analysis of a thick wall cylinder of linear strengthened material based on the unified strength theory.
本文利用库仑屈服准则，研究了拉压异性材料厚壁圆筒和厚壁球壳的弹性极限载荷和塑性极限载荷，得出了新的结果和结论。
The weight function formulas are worked out and can be used for all kinds of depth of crack, materials, assemblage excess, size of combined thick wall cylinder to compute the stress intensity factors.
本文用权函数法导出了由套装应力引起的组合厚壁筒内边裂纹的应力强度因子公式 ，这些公式可用于计算组合厚壁筒在不同裂纹深度、材料、过盈量和尺寸情况下的应力强度因子。
The dynamic autofrettage ability of materials is analyzed. The influence of the diameter ratio of thick-walled-cylinder components on the…
分析了材料的动态自增强能力，考察了径比对厚壁圆筒形构件动态自增强效果的影响。
The dynamic autofrettage ability of materials is analyzed. The influence of the diameter ratio of thick-walled-cylinder components on the…
分析了材料的动态自增强能力，考察了径比对厚壁圆筒形构件动态自增强效果的影响。
应用推荐