A cylinder (Fig. 1) is a hollow tube with a closed concave base that permits the cylinder to stand upright.
钢瓶(图1)是中空的管道，封闭的底部是凹入的，这样可以直立起来。
In all of the press, pillow as determine a printing plate cylinder and rubber roller lining of fixed base.
在所有的印刷机上，滚枕作为确定印版滚筒和橡皮滚筒包衬的固定基准。
Base on the experimental study, a method for calculating the base stress of the opened bottom cylinder structure is.
在此基础上，提出了沉入式无底圆筒结构基底压力的计算方法。
Reusable molds shall be provided with a closure or base on the lower end at right angles to the axis of the cylinder.
应在可复用模具的下端配备一个垂直于圆柱体轴线的隔板或基座。
In view of the structure characteristic kinematics and dynamics of the base of the remote cylinder were analyzed.
然后根据其结构特点，对油缸底座进行运动学和动力学分析；
Finally, the cylinder pressure is identified by using radial base function (RBF) network, which is featured with the powerful functional approach.
最后，利用径向基函数网络强大的函数逼近功能，识别内燃机气缸压力。
The machine is fixed by the motor and roll and roll to mobilize, the base, into the hopper of the clay through the cylinder gap was crushed.
本机是由电动机及固定辊和可调动辊、底座、进料斗组成，粘土通过滚筒间隙而被粉碎。
On the base of loading properties of hollow cylinder apparatus, loading method to simulating the principal stress axes rotation in laboratory tests is given.
以此为基础，结合空心圆柱仪的加载特点，给出了室内模拟主应力轴旋转的加载方法。
On the base of the research of the non-resin winding cylinder preforming technique, particular arithmetic used to develop the computer software was indicated.
本文述叙了三维图形标准OpenGL模拟系统的基本原理，结合干纱缠绕圆柱壳体预成型技术的研究，论述了开发此计算机软件的具体算法。
Glass door base cabinet, complete cylinder package for the drawing edge, acrylic decorations.
玻璃门底柜，整套缸为拉丝包边，亚克力做装饰。
Pulley gear, worm gears, cylinder, bearing base and quadrate pole etc were designed and checked.
设计校核皮带轮传动、蜗轮蜗杆传动、圆筒、轴承座、导杆等。
A cylinder is a hollow tube with a closed concave base that permits it to stand upright.
钢瓶是中空的管道，封闭的底部是凹入的，这样可以直立起来。
Any cone is a third part of the cylinder which has the same base with it and equal height.
任一(正)圆锥是与其同底等高圆柱的三分之一。
By adopting VB language and using a dynamic-link data base, designed was a thermodynamic calculation program for low-parameter single-cylinder steam turbines.
采用VB语言，通过动态链接库的调用，编制了低参数单缸汽轮机热力计算程序。
An ultra-fine roll mill comprises a base, a host cylinder, a centre axle, a bracket, a grinding ring and a grinding roller device.
一种辊碾超细磨包括底座、主机筒体、中心轴、托架、磨环和磨辊装置。
The geometrical optics rainbow angles are studied on the base of ray tracing and GOA of plane wave scattering by infinite eccentric cylinder is derived.
本文将在均匀球粒子GOA方法的基础上，系统研究梯度折射率球粒子对平面波和在轴高斯波束散射的GOA方法；
This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr's yield criterion.
本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析，得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。
Analysis shows that the simulation method not only can apply to control noise of cylinder but also produce base theoretic when designing low noise mill cylinder.
对比分析表明噪声仿真分析可以应用到球磨机的降噪工程上，也能为低噪声球磨机筒体的设计提供理论依据。
The cylinder washing machine has a main body and a base seat with inclined upper surface for supporting the main body.
滚筒洗衣机，本发明的滚筒洗衣机，其用来支撑滚筒洗衣机本体的底座的上面成一定角度倾斜。
The cylinder washing machine has a main body and a base seat with inclined upper surface for supporting the main body.
滚筒洗衣机，本发明的滚筒洗衣机，其用来支撑滚筒洗衣机本体的底座的上面成一定角度倾斜。
应用推荐