Hob on the rest of the cutter tooth is thick teeth.
滚刀上其馀的刀齿都是粗切齿。
In this paper a new simple and exact method is presented for Calculating the tooth profile of the hob cutter based on summing up the various methods for calculating the hob profile.
本文在总结滚刀齿形各种计算方法的基础上,提出了一种新的既简单实用,又精度高的滚刀齿形计算法;
The knife tooth part is the rectangle, through adjusts two cutter surface knife's center distance, cannot replace the cutter, can cut many kinds of different widths on the noodles.
刀齿部分为矩形、通过调整两切面刀的中心距,不需更换切刀,就能切出多种不同宽度的面条。
By analysis of tooth profile of chain wheel machined with form milling cutter in our company, an improved design of form milling cutter and the application result after improved are introduced.
对我公司以往成形铣刀加工链轮齿形存在问题进行分析,介绍改进成形铣刀的设计及改进后的使用效果。
This paper introduces the generating method and presents equation, characteristics, some design considerations and manufacturing method of tooth profile of the cutter.
本文介绍了针轮销孔展成技术,给出了刀具齿廓方程、特点及其设计方法。
The tooth curve of a plunge shaving cutter for an external gear is a recess transcendental curve, so it is difficult to grind it.
用于外齿轮加工的径向剃齿刀,其齿向曲线为内凹超越曲线,这给剃齿刀的刃磨带来了困难。
It pointed out that the design of gear cutter should greatly increase the tooth point arc so as to reduce the stress concentration to increase the force of tooth root.
指出通过计算作出图形,可分析出滚刀齿顶圆弧的设计是否合理。
This paper concludes the designing of the external tooth shaping cutter for tooth tip relief as a double-aimed optimization problem and proposes a mathematic model of optimum design.
把修缘角外插齿刀的设计归结为一个双目标的优化问题,建立了优化设计的数学模型。
This paper describes the tooth forms of an external toothing and chamfering gear shaping cutter and chamfering gear shaper cutters designed by old routine.
描述了外啮合修缘插齿刀和修缘齿轮的齿形,分析了按常规设计修缘插齿刀存在的问题。
However, after shaved by shaving cutter with true involute profiles, there are the "mid-concave" phenomena on the pitch points of shaved gear tooth profiles inevitably.
然而用标准渐开线齿形剃齿刀剃齿后,在工件齿形节点附近会出现不同程度的“中凹”现象。
According to the relative position of the rotor of the screw motor and the milling cutter, the coordinates of the helical tooth form and the cutter are-established.
根据螺杆钻具转子加工时与铣刀的相对位置,建立空间螺旋齿面坐标系和铣刀坐标系。
This paper presents a model for predicting cutting forces in face milling based on a single tooth cutter test.
在单齿铣刀试验的基础上,本文提出了一个端面铣削力模型。
Cutting force models of a single tooth cutter and a multitooth cutter are derived from metal cutting theories and geometric relations of face-milling process.
根据金属切削理论及端铣过程的几何关系提出了单齿和多齿刀具的铣削力模型。
And the normal engagement angle of approaching double-point tooth area is deduced. The special dressing method of shaving cutter has been adopted.
推导了进入双点啮合区的法面啮合角公式,采取了独特的剃齿刀修形方式,从设计和修形上下功夫杜绝剃齿中凹的产生。
The paper describes the selection of two important design parameters-tooth ta-per and cutter diameter.
论述弧齿锥齿轮的两个重要参数——轮齿收缩型式和刀盘直径的正确选择。
The result indicated that the method of double dick-type cutter milling can reduced the tooth profile allowance and improved the asymmetry of tooth profile allowance.
分析结果表明,采用双盘铣刀加工的方法,可以减少齿廓余量,改善齿廓余量的不均匀性。
The advantages of the method are that the tooth profile of the workpiece is not necessary and the width and radius of the disc cutter can also be given at the same time.
该方法具有以下优点:无需知道工件齿形,可同时获得刀具宽度、半径等参数。
According to the normal design method the former involute spline gear shaper cutter often has different size of its tooth top and tooth root.
按常规方法设计的大压力角渐开线花键插齿刀,常出现刀具齿顶宽太小和齿根槽太窄的问题。
The cutter wings are provided with torsional angles, and the cutting edges of the cutter wings are of single-faced or double-faced arc shapes, tooth shapes or line shapes;
所述的刀翼设置有扭角,刀翼的刃口为单面或双面设置的弧形、齿形或线形;
The purpose of this paper is to provide the theoretical basis for designing high-tooth spiral bevel gear cutter head.
本文的研究为等高齿弧齿锥齿轮的刀盘设计提供理论基础。
Cylindrical worms are usually worked by formed turning tool or milling cutter. It is inefficient. The tooth shape is difficult to control and the quality is not easy insured.
通常圆柱形蜗杆都是用成型车刀或铣刀加工,效率低而且齿形不易控制,质量也不易保证。
The best profile for tooth back of the relieving shaped milling cutter is firstly presented in theory.
用成形铣刀铣螺旋槽时,求成形铣刀廓形的问题是个求解空间啮合运动的理论问题。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
应用推荐