A novel current regulator was used in the control system to improve the rotor current waveform.
该系统使用了一种新的电流控制器，以改善电机转子电流波形。
Constant current regulator (CCR) is to provide visual guidance for aircraft taking off and landing.
恒流调光器是为飞机起降提供目视引导的关键设备。
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。
The A3979 includes a fixed off-time current regulator that has the ability to operate in Slow, Fast, or Mixed decay modes.
该A 3979包括一个固定关断时间电流稳压器，有能力在慢，快或混合衰减模式。
A control architecture for an electrical inverter includes a synchronous frame current regulator and a stationary frame current regulator.
一种用于电逆变器的控制体系结构包括同步帧电流调节器和静止帧电流调节器。
This article introduces the fundamental of direct current regulator, and designed a low - voltage power which can inspire the laser instrument.
介绍了直流稳压电路的基本原理，并设计了能激发激光器的低压电源。
The main reasons to affect the operation frequency of two state hysteresis current regulator for motor control system are analyzed by theory and experiment.
从理论和试验两方面分析了影响电机传动系统中滞环两态电流调节器工作频率的主要因素。
A new way to generate stable ac current is found with feed back control system by single chip microcomputer. So a new high power ac current regulator is developed.
再用单片机组成反馈控制系统，从而找到了交流稳流的新方法，研制出一个大功率交流稳流电源。
F(electromotiveforce) of synchronous motor is the most important interference, the general PI(proportion integration)current regulator does not retrain the effect of E.
分析了影响同步电动机矢量控制电流控制环动态特性的主要因素，指出同步电动机反电动势是其中最重要的干扰因素。
The stationary frame current regulator receives input currents that represent filtered versions of stationary frame currents that correspond to the inverter output currents.
所述静止帧电流调节器接收输入电流，所述输入电流表示对应于所述逆变器输出电流的静止帧电流的经滤波的形式。
The control way of system has 3-patterns: exciting regulator of constant terminal voltage, constant exciting current regulator and exciting regulator of constant power factor.
控制方式具有恒机端电压励磁调节、恒励磁电流调节、恒功率因数励磁三种。
This paper presents a decoupled control scheme for three?phase four?leg inverter through an inner current regulator based on space vector cascaded with an outer synchronous frame PI controller.
该文提出了一种采用内环空间矢量电流调节器和外环同步坐标比例积分控制器相级联的三相四桥臂逆变器的控制方案，实现了对三相四桥臂逆变器的解耦控制。
Theinstrument is designed based on electromagnetic theory and principle of equilibrium in mechanics and composed of a timer, a current regulator and meter, control circuits and two-arm pinchers.
该仪器是根据电磁理论和力学平衡原理设计的，由定时器、电流调节器和电流表、控制电路及电磁夹具所组成。
Although that node targets the topology of a standard voltage regulator, the op amp matches it to the much smaller current-sense voltage and the slightly different topology of a current regulator.
虽然节点都是以标准电压拓扑为目标，但是运放可以使其与微弱的电流敏感电压及有些许不同的电流拓扑结构相匹配。
The new system can combine with smelting arc current model, so optimum is ensured for performance of regulator in each smelting stage.
由于新系统可以与冶炼弧流模型紧密结合，因此保证了在各冶炼阶段调节器性能的最优。
When the output intensity of a laser is changed, a feedback control signal processed by a digital PID regulator is used to control the current of a laser tube.
利用输出光强变化，通过数字PID调节器反馈控制激光管电流可获得较为稳定的激光输出。
The current and speed PI regulator parameters are designed using the left half plane zero-pole cancellation method.
采用左半平面零极点相消的方法设计了电流及转速PI调节器的参数；
A method of stepping motor driver circuit was given, composed by a chopper type current mode switch regulator and a monolithic stepping motor driver TA8435H.
提出采用斩波式电流型开关电源结合单片式步进电机驱动器TA8435H，构成一种电机驱动电路的方案。
VCC power | VF LED voltage regulator, driving voltage, IF forward current.
VCC为电源|稳压器电压，VF为LED驱动电压，IF为顺向电流。
This paper presents reversible digital field regulator with DSP and IGBT, which is substituted for current analogue field regulator with thyristors as power element.
本文提出以DSP和IGBT为核心来设计数字式可逆励磁调节器，以取代现有的以晶闸管为功率元件的模拟控制的励磁调节器。
Linear functions of the PI regulator output and the trigger Angle simplify the control program and make the excitation current follow the set current quickly.
通过建立PI输出和控制角的线性化函数，简化控制程序，使励磁电流快速跟踪给定电流。
The current loop selects and USES PI regulator.
电流调节器选用PI调节器。
Use circumscribed regulator maximum output can reach 1500V, 20A, Change is the maximum current 600A than test as.
采用外接调压器最大输出可达1500V、20A；变比测试最大电流高达600A。
The schematics includes four parts: bandgap reference voltage and reference current, 2.7V and 1.8V regulator, over-load protection , Low Battery Detection (LBD) .
其原理包括参考电压电流电路，2.7V及1.8V电压调整电路，过流保护电路以及低压检测电路四个部分。
The controller case includes stepping motor, self-coupling voltage regulator, alternating-current contactor, relay and micro-transformer.
控制柜主要包括步进电机、自耦调压器、交流接触器、继电器以及微型互感器等。
The average inductance current can be calculated by input voltage and output voltage to use in PI regulator.
通过采样输入输出电压以获取电感的平均电流，从而代替了实际的采样电流，以进行PI调节。
APF then access points al0ng the harmonic current feedback, as a regulator input, adjusted feedforward control error.
再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
APF then access points al0ng the harmonic current feedback, as a regulator input, adjusted feedforward control error.
再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
应用推荐