According to the temperature crack, the flexible treatment method is adopted, which could meet the crack deformation in the stretching process and play an important role in the seepage.
针对这种温度裂缝,采用柔性处理的方法,既满足裂缝在伸缩过程中的变形,又起到了防渗作用。
Is mainly the size effect and solidification, shrinkage, stress and other issues clearly, to avoid or reduce the segregation, iron manhole cover deformation and crack defects.
主要是明显的尺寸效应和凝固、收缩、应力等问题,避免或减少铸铁井盖的成分偏析、变形、开裂等缺陷的产生。
With the impact and vibration of the crane, it may cause the rail installation loose, the connector fall off, deformation, crack, precision index super difference.
随着起重机运行时产生的冲击和振动,可能引起轨道安装的松动、连接件脱落、变形、裂纹、精度指标超差。
Brittle fracture. Fracture that occurs by rapid crack propagation and without appreciable macroscopic deformation.
通过快速裂纹扩展发生断裂,没有明显的宏观变形。
Expansion joint: to meet the deformation of foundation, expansion and construction requirements play, prevent play a change in temperature in transverse crack produces.
伸缩缝:为适应地基变形,管身伸缩及施工要求,防止管身在温度变化时产生横向裂缝。
Solid mu fu closes the door: mainly is real wood frame, make the top surface veneer, modelling generally do very beautiful, the price is reasonable, the main advantage is not deformation, no crack.
实木复合门:主要是实木做骨架,表面贴高级木皮做的门,造型一般非常美观,价格合理,主要的优点是不变形,不开裂。
Design and analysis: loading combinations, section steel area calculating, earring capacity computation, section stress checking, deformation and crack width checking and so on.
设计分析:含荷载组合计算、截面配筋设计、承载能力计算、截面应力验算、变形及裂缝宽度验算等。
Product not deformation, not to crack, not shrink, durable, beautiful appearance.
产品不变形,不开裂,不缩水,坚固耐用,外形美观。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
The paper discusses the cause of and the solution to deformation and crack of micro - wave drying ceramic products, and compares micro - wave drying with traditional drying.
详细讨论了微波干燥造成陶瓷坯体变形、开裂的原因及解决方法,并与传统干燥方法进行了比较。
However to the large deformation shaft without crack, general predictive theory has been applied to built up the multi-steps straightening stroke predictive algorithm.
针对单弧度弯曲大变形无裂纹轴校直问题,根据广义预测控制理论,建立了多步校直行程预测算法。
Mechanism of damage of clay pot for utensil glass melting, such as softening deformation at high temperature, corrosion by molten glass, crack by thermal shock, etc was studied.
对熔化器皿玻璃等的粘土质坩埚使用中的高温软化变形、玻璃液侵蚀、热震开裂等损毁机制进行了分析研究。
This paper advanced a study method that can observe plastic deformation behavior of surface layer of die cavity by showing austenite grain, size, crack morphology and propagation mode.
提出了通过显示奥氏体实际晶粒度、裂纹形貌和扩展方式来分析热锻模具型腔表层塑性变形行为的试验方法。
The mechanism of crack is that internal stress in concrete material caused by its restricted deformation is greater than tensile strength of material generally.
就混凝土自身而言,产生裂缝的机理一般认为是因为混凝土材料变形受约束所引起的内应力大于材料抗拉强度的缘故。
The reasons of corner crack and deformation of frame beam and ear draft of the coke pot of CDQ at Jigang are analyzed.
分析了济钢干熄焦焦罐存在的角部开裂、框架横梁和吊耳拉杆变形的原因。
In flattening test, the crack happened in the lagest deformation parts.
压扁试验中试样的最大变形部位出现裂纹状缺陷。
Its effect of controlling the concrete's crack and crush, decreasing the structural deformation and improving the structural stability is marked.
这种结构能有效的控制混凝土在爆炸冲击荷载作用下的开裂、震塌,限制结构的变形,增强结构稳定性。
In the process of plastic deformation, crack initiation and growth, and impact, the characteristics of acoustic emission (AE) signals and the factors that affect them are also elaborately discussed.
对塑性变形过程、裂纹的萌生和扩展过程以及冲击过程的声发射特点及其内部成因也做了深入的分析。
The practical investigation and research on the foundation deformation and wall crack of the buildings are introduced, furthermore, the opinions to treat the foundation are proposed.
对既有建筑物地基变形墙体裂缝实际调查分析地基处理的重要性,对建筑物地基处理提出意见。
The crack fractographs of X60 pipeline steel after 10% per-tension deformation under cyclic loading are investigated by the SEM.
用扫描电镜(SEM)分析了X60管线钢在未变形和10%的预拉伸变形后循环载荷下的裂纹断口形貌。
Paulownia has many virtues of beautiful grain, even texture, excellent moisture resistance, light and flexible, no crack, no deformation, difficult to burn, and well stain.
桐木木材纹理美观,结构均匀,质轻柔韧,不裂不挠,防潮性好、不易变形,不易燃烧,油漆染色良好。
It's a feasible practice to quench in air for castings made of steels with higher hardenability to reduce or avoid its deformation and crack during heat treatment process.
采用高淬透性钢进行空冷淬火是一种减少铸件热处理变形和开裂的有效措施。
As bearing pressure isn't enough beam and plate deformation of reinforcement concrete is much big, crack is much wide and rusting is serious.
由于承载力不足使钢筋混凝土梁的变形过大,裂缝过大,钢筋锈蚀严重等。
The deformation moduli increase with increment of crack friction coefficient and decrease with increment of crack density parameter.
随着裂隙摩擦系数的增加,变形模量有逐渐增加的趋势。
For the inner crack appearing often in round-rod rolling steels in the production, the influence to the crack from deformation extent and mechanical condition in the deformation region is discussed.
圆棒轧材在生产过程中经常出现内裂纹,本文研究了变形程度和变形区力学条件对内裂纹的影响。
The results show that the properties resistance to plastic deformation and crack propagation of the experimental steel both reduce along with temperature drops.
结果表明,该试验钢的抗塑性变形能力、抗裂纹扩展能力均随温度降低而降低。
The elastic-plastic deformation of the vessel shell is taken into account in the model to suit for the crack problem of the vessel shell in the plastic deformation range.
模型考虑容器壳体材料的弹性、塑性变形,适用于容器外壳在塑性变形范围内发生破裂的问题。
The bolt fastening metal structure of tower crane and pin structure without deformation, no weld crack.
塔吊的紧固金属结构的联接螺栓和销轴,结构件不得有变形,焊缝不得有裂纹。
Crack closure of base metal is caused by the residual plastic plastic deformation remaining in the wake of an advancing crack tip and is not as significant as in welded specimen.
而在管线钢基材中裂纹闭合现象较小,闭合原因是裂纹尖端尾部的残余塑性变形。
The influence of hydrogen on the deformation ahead of crack tip and crack propagation were in-situ observed and analyzed under TEM during dynamic tensile deformation of engineering structure steel.
利用透射电镜原位动态拉伸方法观察、分析氢对裂纹尖端塑性变形及裂纹扩展过程的影响。
应用推荐