In industry, diamond can form a tough, non-corrosive coating for tools.
在工业中，钻石可以制成工具上的一层坚硬且耐腐蚀的涂层。
This problem can be solved by applying a bactericidal and anti-corrosive coating on the walls of the Wells.
采用在井壁涂刷杀菌防腐涂料的办法可解决这一问题。
The influence of WD-60 coupling agents on adhesion and salt-spray property of epoxy anti-corrosive coating were investigated.
研究了WD-60偶联剂对环氧防腐涂料附着力和耐盐雾腐蚀性能的影响，确定了WD-60偶联剂的最佳用量。
The methods used for the coating can well ensure the construction quality and can satisfy the technical requirements for the anti-corrosive coating.
所用方法能较好地保证施工质量，满足防腐涂装技术要求。
Silica sol is used to improve the performance of epoxy resin E-44. The zinc-rich anti-corrosive coating is prepared by the modified epoxy resin-based material.
通过硅溶胶来改善环氧树脂e - 44的性能，以改性环氧树脂为基料，制备了富锌防腐涂料。
The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.
在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层，采用拉开法测定了各涂层体系的结合强度。
It is also present the application example of the GFT-1 high-performance anti-corrosive coating and the glass fiber reinforced plastic made by the coating in the sewage treatment construction.
介绍了GFT—1高性能防腐蚀涂料和由此制成的鳞片衬里在污水处理工程中的应用范例。
Coating multilayer anticorrosive dope after blasting and antisepticising, anti corrosive, easy washing and cleaning up.
秤体经喷砂防腐处理，表面涂覆多层防腐涂料，耐腐蚀，方便冲洗、整理。
Good for dirty, coating and corrosive applications.
对脏，涂料和腐蚀性应用良好。
The results indicate that ceramic coating can greatly improve the corrosion resistance of matrix in various corrosive media.
结果表明，陶瓷涂层能大幅度提高基体在各种腐蚀介质中的耐蚀性。
The results indicate that the ceramic coating films increase drastically the lifetime of the substrate metal in corrosive media and oxidizing atmosphere.
分析试验结果表明，这些陶瓷涂层大幅度提高了基底金属在腐蚀介质及氧化环境中的寿命。
The anti-corrosive mechanism, preparation procedure in lab, manufacture process, performance test and application fields of Zn-Cr coating technology are introduced.
介绍了锌铬膜涂层的防腐蚀机理、实验室制备过程、生产工艺过程、性能检测和应用领域；
The bubbling, flaking, loss of wet adhesion and et al of the coating film occurred under the action of hot water, dissolved oxygen, corrosive chlorium and et al are introduced.
针对水箱中高湿热腐蚀环境，介绍了涂层在热水、溶解氧及腐蚀性氯离子等影响因素作用下发生的鼓泡、脱落、湿附着力丧失等现象。
Finally, put forward measures to weaken the chimney corrosive environment by the operation of power plants, describes the current common anti-corrosion coating and lining in the chimney.
文章最后，提出了通过运行控制弱化腐蚀环境烟囱防腐措施，介绍了目前常见的烟囱防腐涂料和内衬。
The in-situ maintenance technology included chemical oxide coating, primer and sealing glue, was introduced for the corrosive surface of missile launching pylon in airplane.
采用化学氧化层、底漆、密封胶三层防腐蚀修复工艺，原位修复飞机导弹发射梁表面腐蚀，试验了修复层的防腐蚀性能。
The corrosive behavior of Pulse Vacuum Nitriding coating and plain sample were investigated by an apparatus of electrochemical measurement.
通过电化学测试方法研究了脉冲真空渗氮防腐层及裸样的抗腐蚀性能。
The research procedure of the heavy-film anti-corrosive concrete coating and its application process on the surface of prestressed concrete cylinder pipe(PCCP) are introduced.
介绍了用于混凝土表面可厚涂的防腐蚀涂料的研制过程及其在PCCP表面的施工工艺。
Note: 1, This product is non-toxic, non-corrosive. Widely used in coating, rubber.
说明：1，本产品无毒、无腐蚀性。广泛用于涂料、橡胶、塑胶、塑料、油漆、陶瓷等行业的。
The corrosion protection practice showed that the tubes with protective coating of nano titanium polymer and alloy tubes with tungsten-plating performed well in the corrosive environment.
实践表明，“钛纳米聚合物防腐蚀涂层油管”和“镀钨合金防腐蚀油管”在上述环境使用较为适合；
A portable corrosion rate meter was used to comparatively measure the annual corrosion rates of 20 steel tube and its integral hot-dip aluminizing coating in acidic and alkali corrosive mediums.
采用便携式瞬时腐蚀速度测量仪，对20钢及其热浸镀铝件分别在酸性和碱性介质中测定年腐蚀速率并进行比较。
The corrosion behavior of electrode of stainless steel with polyaniline coating in corrosive acid media were investigated.
研究了由聚苯胺修饰的不锈钢电极在酸性介质中的腐蚀行为。
When the coating is used to prevent corrosion, the corrosive medium will get to the base across the porosity. So the corrosion protection is invalid.
当涂层用于防腐蚀时，腐蚀介质会通过孔隙到达基体表面，从而造成防护失败。
When the coating is used to prevent corrosion, the corrosive medium will get to the base across the porosity. So the corrosion protection is invalid.
当涂层用于防腐蚀时，腐蚀介质会通过孔隙到达基体表面，从而造成防护失败。
应用推荐