The deeply removing copper process from the simulated nickel chloride electrolyte with SP-C is studied.
研究了新型硅胶-聚合胺复合材料树脂SP-C在模拟氯化镍电解液中深度净化除铜工艺。
The predigestion life cycle assessment method (LCA) has been applied to investigate the environmental impact of recycle copper process from copper-slag.
本文运用简化生命周期评价的方法,对铜炉渣回收铜的过程进行了环境影响评价。
Introduction to semiconductor manufacturing technology including oxidation, diffusion, alloying, re-flow process, copper process and chemical-mechanical polishing.
半导体制程技术包括氧化、扩散、热处理、合金化、再流动制程、铜制程及化学机械研磨制程简介。
The green "metal free tool" sign indicates that this machine is used in a part of the process prior to the addition of copper circuits.
绿色的“非金属添加工具(metalfreetool)”标志意味着硅晶圆必须得经过这台机器的处理以后,才能去添加铜质电路。
Similarly, oxygen enhances the combustion process in industries that manufacture glass, aluminum, copper, gold, lead, and cement or that are involved in waste incineration or remediation.
同样地,氧在许多工业中促进燃烧过程,这些工业包括玻璃、铝、铜、金、铅和水泥或者同垃圾焚化或回收相关的工业。
The process flow extracting Copper and Nickel sulfate from electroplating sludge is put forward. The economic barometer of technology procedure is investigated by test.
提出了含铜含镍电镀污泥综合利用的工艺流程,并用试验考察了各工序的技术经济指标。
Copper production process for the lead with raw materials, through multi-channel Flap molding.
铜条生产工艺铅带为原料,通过多道折边成型。
There has also been a surprise drop in the fees charged by smelters and refiners to process dry feedstock, or copper concentrate as it is known, into anodes and eventually cathodes.
冶炼商和精炼商将干原料(即铜精矿)加工为阳极铜、以及最终加工为阴极铜收取的费用也令人意外地出现了下降。
Until fairly recently, the only way to extract pure copper from ore was by using a process that requires large amounts of electric energy, especially if the proportion of copper in the ore is low.
直到最近,从矿石中提取纯铜的最佳方法是使用一项需要消耗大量电能的工艺,尤其是当矿石中铜含量低的时候。
Model Hammering: the process is to form copper pieces into various shapes with a hammer according to a design, joining them under high temperature.
锤击过程模型:是形成铜件成各种形状,根据设计的锤子,加入他们在高温下。
Typical materials that can be cast with this process are iron, steel, stainless steels, and alloys of aluminum, copper and nickel.
可用此工艺铸造的典型材料有:铁、钢、不锈钢以及铝、铜和镍的合金。
The machining process of copper reflector is described. A processing method of "simultaneous processing of two sides and natural stress releasing" is put forth.
叙述铜反射镜的加工过程,提出“两面同时加工,自然释放应力”的加工方法。
New copper-extracting technologies can use up to 40 percent less electricity than the older method to process the same amount of raw ore, especially when the proportion of copper in the ore is high.
在处理同等数量矿石原料的情况下,尤其是当铜在矿石中的含量很高时,新的采铜工艺可比旧式工艺少用40%的电力。
The resistance of the copper rate is low, so in printed circuit board, used to prepare copper foil and double panel, produce multilayer prototypes via metallization copper with on the process.
金属铜的电阻率低,所以在印制电路板中,用来制备铜箔及双面板、多层板的孔金属化方面采用镀铜工艺。
The progress of ISA Process technology in copper refining in last years are discussed on the following aspect: ISA Process, edge strips and equipment.
介绍ISA铜电解技术近年来在工艺、阴极板绝缘边、设备等方面进行的研究和取得的进展。
Welding principle and its operating process of flat copper wire in large transformer windings are introduced.
介绍了大型变压器绕组用扁铜导线的焊接原理及其操作工艺。
Copper is also employed in the alkaline Bemberg rayon process.
铜也用在碱性本姆伯人造丝生产中。
The oxygen autogenous smelting process of nickeliferous copper concentrate from Jinchuan Nonferrous Corp.
对金川二次铜精矿氧气自热熔炼过程进行热力学分析。
This article presents the requirement of automatic control for the production process of a copper smelting furnace and the application of DCS to process.
本文介绍铜冶炼鼓风炉生产过程的自动控制要求以及小型集散控制系统在该过程的应用情况。
New technological process to extract copper powder and nickel sulfate from electroplating sludge was reported in this paper, and the economic barometer of technology procedures was examined in test.
提出了利用铜镍电镀污泥生产金属铜和硫酸镍的工艺流程,并用试验考察了各工序的技术经济指标。
Multiphase equilibrium mathematical model for the copper flash smelting process is established based on the Gibbs principle of minimum free energy.
基于吉布斯最小自由能原理,建立了铜闪速熔炼过程的多相平衡数学模型。
Copper electroforming and nickel electroforming processes were compared with copper electroplating and nickel electroforming process respectively.
对电铸铜与电镀铜工艺、电铸镍与电镀镍工艺进行了比较。
Is the copper plating process an electrolytic acid copper plating system?
电镀站是否有酸解电镀铜系统?
The paper introduces the application of the low pressurepules bag filter to the process of copper smelting.
介绍低压脉冲袋式收尘器替代传统扁袋除尘器技术在有色金属铜冶炼过程中的应用。
Based on developed numerical simulation method, the impacting behavior of copper particle colliding copper substrate in process of transforming material property is investigated.
采用有限元数值计算方法,研究冷喷涂材料改性过程中铜粒子与铜基体非垂直碰撞的变形行为。
The process of cyanide copper electroplating is replaced by the proposed process of pyrophosphate electroplating copper on magnesium alloy.
用研究的焦磷酸盐镀铜工艺代替氰化镀铜工艺作为过渡铜镀层的无氰镀工艺。
The roasting process of copper sulfide concentrate in the presence of calcium carbonate is studied by using the differential thermal analysis (DTA), thermogravimetric (TG) and X-ray diffraction.
通过DTA和TG结合X 射线衍射分析的方法,将硫化铜精矿加碳酸钙焙烧与硫化铜精矿焙烧的反应机理进行了对比研究。
A new kind of non-cyanide alkaline strike copper plating process for zinc alloy die-castings was developed in order to solve the problems in traditional non-cyanide strike copper plating.
为解决传统的锌压铸件无氰预镀铜存在的一些问题,提出了一种新的锌合金压铸件无氰碱性预镀铜工艺。
A new kind of non-cyanide alkaline strike copper plating process for zinc alloy die-castings was developed in order to solve the problems in traditional non-cyanide strike copper plating.
为解决传统的锌压铸件无氰预镀铜存在的一些问题,提出了一种新的锌合金压铸件无氰碱性预镀铜工艺。
应用推荐